blob: de3b5ab9d93bcff4b4c2b49828a3988c6a38599c [file] [log] [blame]
Michal Simek090a2d72018-03-27 10:36:39 +02001// SPDX-License-Identifier: GPL-2.0+
Michal Simek5fc61c82016-04-07 15:58:23 +02002/*
3 * dts file for Xilinx ZynqMP ZCU102 RevB
4 *
Michal Simek4f1b7f62020-02-18 08:38:06 +01005 * (C) Copyright 2016 - 2020, Xilinx, Inc.
Michal Simek5fc61c82016-04-07 15:58:23 +02006 *
7 * Michal Simek <michal.simek@xilinx.com>
Michal Simek5fc61c82016-04-07 15:58:23 +02008 */
9
Michal Simek40d839a2017-07-20 12:38:27 +020010#include "zynqmp-zcu102-revA.dts"
Michal Simek5fc61c82016-04-07 15:58:23 +020011
12/ {
13 model = "ZynqMP ZCU102 RevB";
Michal Simek56c91422017-11-02 10:22:27 +010014 compatible = "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
Michal Simek5fc61c82016-04-07 15:58:23 +020015};
16
17&gem3 {
18 phy-handle = <&phyc>;
Harini Katakam1d1c56d2022-12-12 15:14:17 +010019 mdio: mdio {
20 phyc: ethernet-phy@c {
21 #phy-cells = <0x1>;
22 compatible = "ethernet-phy-id2000.a231";
23 reg = <0xc>;
24 ti,rx-internal-delay = <0x8>;
25 ti,tx-internal-delay = <0xa>;
26 ti,fifo-depth = <0x1>;
27 ti,dp83867-rxctrl-strap-quirk;
Harini Katakam1e69c3d2022-12-12 15:14:18 +010028 reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
Harini Katakam1d1c56d2022-12-12 15:14:17 +010029 };
30 /* Cleanup from RevA */
31 /delete-node/ ethernet-phy@21;
Michal Simek5fc61c82016-04-07 15:58:23 +020032 };
Michal Simek5fc61c82016-04-07 15:58:23 +020033};
34
Michal Simek5fc61c82016-04-07 15:58:23 +020035/* Fix collision with u61 */
36&i2c0 {
Michal Simek2fde09e2018-03-27 10:38:08 +020037 i2c-mux@75 {
Michal Simek5fc61c82016-04-07 15:58:23 +020038 i2c@2 {
39 max15303@1b { /* u8 */
Michal Simekcba5b322018-03-27 10:52:40 +020040 compatible = "maxim,max15303";
Michal Simek5fc61c82016-04-07 15:58:23 +020041 reg = <0x1b>;
42 };
43 /delete-node/ max15303@20;
44 };
45 };
46};