Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / dc9ee68f6b74e608b3e6a3461f0d83e9c66e547e / . / include / configs / x600.h
blob: 3082aaa1e6368e144d8da55bb7bd1be1fd22927e [file] [log] [blame]
Stefan Roese181e06b2012-05-30 22:59:08 +0000[diff] [blame]1/*
2 * (C) Copyright 2009
3 * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
4 *
5 * Copyright (C) 2012 Stefan Roese <sr@denx.de>
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26#ifndef __CONFIG_H
27#define __CONFIG_H
28
29/*
30 * High Level Configuration Options
31 * (easy to change)
32 */
33#define CONFIG_SPEAR600 /* SPEAr600 SoC */
34#define CONFIG_X600 /* on X600 board */
35
36#include <asm/arch/hardware.h>
37
38/* Timer, HZ specific defines */
39#define CONFIG_SYS_HZ 1000
40#define CONFIG_SYS_HZ_CLOCK 8300000
41
42#define CONFIG_SYS_TEXT_BASE 0x00800040
43#define CONFIG_SYS_FLASH_BASE 0xf8000000
44/* Reserve 8KiB for SPL */
45#define CONFIG_SPL_PAD_TO 8192 /* decimal for 'dd' */
46#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
47#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
48 CONFIG_SYS_SPL_LEN)
49#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
50#define CONFIG_SYS_MONITOR_LEN 0x60000
51
52#define CONFIG_ENV_IS_IN_FLASH
53
54/* Serial Configuration (PL011) */
55#define CONFIG_SYS_SERIAL0 0xD0000000
56#define CONFIG_SYS_SERIAL1 0xD0080000
57#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \
58 (void *)CONFIG_SYS_SERIAL1 }
59#define CONFIG_PL011_SERIAL
60#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
61#define CONFIG_CONS_INDEX 0
62#define CONFIG_BAUDRATE 115200
63#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
64 57600, 115200 }
65#define CONFIG_SYS_LOADS_BAUD_CHANGE
66
67/* NOR FLASH config options */
68#define CONFIG_ST_SMI
69#define CONFIG_SYS_MAX_FLASH_BANKS 1
70#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
71#define CONFIG_SYS_FLASH_ADDR_BASE { CONFIG_SYS_FLASH_BASE }
72#define CONFIG_SYS_MAX_FLASH_SECT 128
73#define CONFIG_SYS_FLASH_EMPTY_INFO
74#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
75#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
76
77/* NAND FLASH config options */
78#define CONFIG_NAND_FSMC
79#define CONFIG_SYS_NAND_SELF_INIT
80#define CONFIG_SYS_MAX_NAND_DEVICE 1
81#define CONFIG_SYS_NAND_BASE CONFIG_FSMC_NAND_BASE
82#define CONFIG_MTD_ECC_SOFT
83#define CONFIG_SYS_FSMC_NAND_8BIT
84#define CONFIG_SYS_NAND_ONFI_DETECTION
85
86/* UBI/UBI config options */
87#define CONFIG_MTD_DEVICE
88#define CONFIG_MTD_PARTITIONS
89#define CONFIG_RBTREE
90
91/* Ethernet config options */
92#define CONFIG_MII
93#define CONFIG_DESIGNWARE_ETH
94#define CONFIG_DW_SEARCH_PHY
95#define CONFIG_NET_MULTI
96#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
97#define CONFIG_DW_AUTONEG
98#define CONFIG_PHY_ADDR 0 /* PHY address */
99#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
100
101#define CONFIG_SPEAR_GPIO
102
103/* I2C config options */
104#define CONFIG_HARD_I2C
105#define CONFIG_DW_I2C
106#define CONFIG_SYS_I2C_SPEED 400000
107#define CONFIG_SYS_I2C_SLAVE 0x02
108#define CONFIG_I2C_CHIPADDRESS 0x50
109
110#define CONFIG_RTC_M41T62 1
111#define CONFIG_SYS_I2C_RTC_ADDR 0x68
112
113/* FPGA config options */
114#define CONFIG_FPGA
115#define CONFIG_FPGA_XILINX
116#define CONFIG_FPGA_SPARTAN3
117#define CONFIG_FPGA_COUNT 1
118
119/*
120 * Command support defines
121 */
122#define CONFIG_CMD_CACHE
123#define CONFIG_CMD_DATE
124#define CONFIG_CMD_DHCP
125#define CONFIG_CMD_ENV
126#define CONFIG_CMD_FPGA
127#define CONFIG_CMD_GPIO
128#define CONFIG_CMD_I2C
129#define CONFIG_CMD_MEMORY
130#define CONFIG_CMD_MII
131#define CONFIG_CMD_MTDPARTS
132#define CONFIG_CMD_NAND
133#define CONFIG_CMD_NET
134#define CONFIG_CMD_PING
135#define CONFIG_CMD_RUN
136#define CONFIG_CMD_SAVES
137#define CONFIG_CMD_UBI
138#define CONFIG_CMD_UBIFS
139#define CONFIG_LZO
140
141/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
142#include <config_cmd_default.h>
143
144#define CONFIG_BOOTDELAY 3
145
146#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
147#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
148
149/*
150 * U-Boot Environment placing definitions.
151 */
152#define CONFIG_ENV_SECT_SIZE 0x00010000
153#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
154 CONFIG_SYS_MONITOR_LEN)
155#define CONFIG_ENV_SIZE 0x02000
156#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \
157 CONFIG_ENV_SECT_SIZE)
158#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
159
160/* Miscellaneous configurable options */
161#define CONFIG_ARCH_CPU_INIT
162#define CONFIG_DISPLAY_CPUINFO
163#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
164#define CONFIG_CMDLINE_TAG
165#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
166#define CONFIG_SETUP_MEMORY_TAGS
167#define CONFIG_MISC_INIT_R
168#define CONFIG_BOARD_LATE_INIT
169#define CONFIG_LOOPW /* enable loopw command */
170#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
171#define CONFIG_ZERO_BOOTDELAY_CHECK
172#define CONFIG_AUTOBOOT_KEYED
173#define CONFIG_AUTOBOOT_STOP_STR " "
174#define CONFIG_AUTOBOOT_PROMPT \
175 "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
176
177#define CONFIG_SYS_MEMTEST_START 0x00800000
178#define CONFIG_SYS_MEMTEST_END 0x04000000
179#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
180#define CONFIG_IDENT_STRING "-SPEAr"
181#define CONFIG_SYS_LONGHELP
182#define CONFIG_SYS_PROMPT "X600> "
183#define CONFIG_CMDLINE_EDITING
184#define CONFIG_SYS_CBSIZE 256
185#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
186 sizeof(CONFIG_SYS_PROMPT) + 16)
187#define CONFIG_SYS_MAXARGS 16
188#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
189#define CONFIG_SYS_LOAD_ADDR 0x00800000
190#define CONFIG_SYS_CONSOLE_INFO_QUIET
191#define CONFIG_SYS_64BIT_VSPRINTF
192
193/* Use last 2 lwords in internal SRAM for bootcounter */
194#define CONFIG_BOOTCOUNT_LIMIT
195#define CONFIG_SYS_BOOTCOUNT_ADDR 0xd2801ff8
196
197#define CONFIG_HOSTNAME x600
198#define CONFIG_UBI_PART ubi0
199#define CONFIG_UBIFS_VOLUME rootfs
200
201#define xstr(s) str(s)
202#define str(s) #s
203
204#define MTDIDS_DEFAULT "nand0=nand"
205#define MTDPARTS_DEFAULT "mtdparts=nand:64M(ubi0),64M(ubi1)"
206
207#define CONFIG_EXTRA_ENV_SETTINGS \
208 "u-boot_addr=1000000\0" \
209 "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.spr\0" \
210 "load=tftp ${u-boot_addr} ${u-boot}\0" \
211 "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};"\
212 "erase " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
213 "cp.b ${u-boot_addr} " xstr(CONFIG_SYS_MONITOR_BASE) \
214 " ${filesize};" \
215 "protect on " xstr(CONFIG_SYS_MONITOR_BASE) \
216 " +${filesize}\0" \
217 "upd=run load update\0" \
218 "ubifs=" xstr(CONFIG_HOSTNAME) "/ubifs.img\0" \
219 "part=" xstr(CONFIG_UBI_PART) "\0" \
220 "vol=" xstr(CONFIG_UBIFS_VOLUME) "\0" \
221 "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
222 "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
223 " ${filesize}\0" \
224 "upd_ubifs=run load_ubifs update_ubifs\0" \
225 "init_ubifs=nand erase.part ubi0;ubi part ${part};" \
226 "ubi create ${vol} 4000000\0" \
227 "netdev=eth0\0" \
228 "rootpath=/opt/eldk-4.2/arm\0" \
229 "nfsargs=setenv bootargs root=/dev/nfs rw " \
230 "nfsroot=${serverip}:${rootpath}\0" \
231 "ramargs=setenv bootargs root=/dev/ram rw\0" \
232 "boot_part=0\0" \
233 "altbootcmd=if test $boot_part -eq 0;then " \
234 "echo Switching to partition 1!;" \
235 "setenv boot_part 1;" \
236 "else; " \
237 "echo Switching to partition 0!;" \
238 "setenv boot_part 0;" \
239 "fi;" \
240 "saveenv;boot\0" \
241 "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} " \
242 "root=ubi0:rootfs rootfstype=ubifs\0" \
243 "kernel=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
244 "kernel_fs=/boot/uImage \0" \
245 "kernel_addr=1000000\0" \
246 "dtb=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0" \
247 "dtb_fs=/boot/" xstr(CONFIG_HOSTNAME) ".dtb\0" \
248 "dtb_addr=1800000\0" \
249 "load_kernel=tftp ${kernel_addr} ${kernel}\0" \
250 "load_dtb=tftp ${dtb_addr} ${dtb}\0" \
251 "addip=setenv bootargs ${bootargs} " \
252 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
253 ":${hostname}:${netdev}:off panic=1\0" \
254 "addcon=setenv bootargs ${bootargs} console=ttyAMA0," \
255 "${baudrate}\0" \
256 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
257 "net_nfs=run load_dtb load_kernel; " \
258 "run nfsargs addip addcon addmtd addmisc;" \
259 "bootm ${kernel_addr} - ${dtb_addr}\0" \
260 "mtdids=" MTDIDS_DEFAULT "\0" \
261 "mtdparts=" MTDPARTS_DEFAULT "\0" \
262 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
263 " addcon addmisc addmtd;" \
264 "bootm ${kernel_addr} - ${dtb_addr}\0" \
265 "ubifs_mount=ubi part ubi${boot_part};ubifsmount rootfs\0" \
266 "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
267 "ubifsload ${dtb_addr} ${dtb_fs};\0" \
268 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
269 "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0" \
270 "bootcmd=run nand_ubifs\0" \
271 "\0"
272
273/* Stack sizes */
274#define CONFIG_STACKSIZE (512 * 1024)
275
276/* Physical Memory Map */
277#define CONFIG_NR_DRAM_BANKS 1
278#define PHYS_SDRAM_1 0x00000000
279#define PHYS_SDRAM_1_MAXSIZE 0x40000000
280
281#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
282#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
283#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
284
285#define CONFIG_SYS_INIT_SP_OFFSET \
286 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
287
288#define CONFIG_SYS_INIT_SP_ADDR \
289 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
290
291/*
292 * SPL related defines
293 */
294#define CONFIG_SPL
295#define CONFIG_SPL_TEXT_BASE 0xd2800b00
296#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
297#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
298
299#define CONFIG_SPL_SERIAL_SUPPORT
300#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
301#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
302#define CONFIG_SPL_NO_PRINTF
303
304/*
305 * Please select/define only one of the following
306 * Each definition corresponds to a supported DDR chip.
307 * DDR configuration is based on the following selection
308 */
309#define CONFIG_DDR_MT47H64M16 1
310#define CONFIG_DDR_MT47H32M16 0
311#define CONFIG_DDR_MT47H128M8 0
312
313/*
314 * Synchronous/Asynchronous operation of DDR
315 *
316 * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation
317 * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation
318 * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation
319 */
320#define CONFIG_DDR_2HCLK 1
321#define CONFIG_DDR_HCLK 0
322#define CONFIG_DDR_PLL2 0
323
324/*
325 * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported
326 * or not. Modify/Add to only these macros to define new boot types
327 */
328#define USB_BOOT_SUPPORTED 0
329#define PCIE_BOOT_SUPPORTED 0
330#define SNOR_BOOT_SUPPORTED 1
331#define NAND_BOOT_SUPPORTED 1
332#define PNOR_BOOT_SUPPORTED 0
333#define TFTP_BOOT_SUPPORTED 0
334#define UART_BOOT_SUPPORTED 0
335#define SPI_BOOT_SUPPORTED 0
336#define I2C_BOOT_SUPPORTED 0
337#define MMC_BOOT_SUPPORTED 0
338
339#endif /* __CONFIG_H */