blob: 17bfa7c02f58364893576749acda0b5bc47cea44 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Mateusz Kulikowskidc381172016-03-31 23:12:26 +02002/*
3 * Qualcomm EHCI driver
4 *
5 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
6 *
7 * Based on Linux driver
Mateusz Kulikowskidc381172016-03-31 23:12:26 +02008 */
9
10#include <common.h>
11#include <dm.h>
12#include <errno.h>
13#include <fdtdec.h>
Masahiro Yamada75f82d02018-03-05 01:20:11 +090014#include <linux/libfdt.h>
Mateusz Kulikowskidc381172016-03-31 23:12:26 +020015#include <usb.h>
16#include <usb/ehci-ci.h>
17#include <usb/ulpi.h>
18#include <wait_bit.h>
19#include <asm/gpio.h>
20#include <asm/io.h>
21#include <linux/compat.h>
22#include "ehci.h"
23
24/* PHY viewport regs */
25#define ULPI_MISC_A_READ 0x96
26#define ULPI_MISC_A_SET 0x97
27#define ULPI_MISC_A_CLEAR 0x98
28#define ULPI_MISC_A_VBUSVLDEXTSEL (1 << 1)
29#define ULPI_MISC_A_VBUSVLDEXT (1 << 0)
30
31#define GEN2_SESS_VLD_CTRL_EN (1 << 7)
32
33#define SESS_VLD_CTRL (1 << 25)
34
35struct msm_ehci_priv {
36 struct ehci_ctrl ctrl; /* Needed by EHCI */
37 struct usb_ehci *ehci; /* Start of IP core*/
38 struct ulpi_viewport ulpi_vp; /* ULPI Viewport */
39};
40
41int __weak board_prepare_usb(enum usb_init_type type)
42{
43 return 0;
44}
45
46static void setup_usb_phy(struct msm_ehci_priv *priv)
47{
48 /* Select and enable external configuration with USB PHY */
49 ulpi_write(&priv->ulpi_vp, (u8 *)ULPI_MISC_A_SET,
50 ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT);
51}
52
53static void reset_usb_phy(struct msm_ehci_priv *priv)
54{
55 /* Disable VBUS mimicing in the controller. */
56 ulpi_write(&priv->ulpi_vp, (u8 *)ULPI_MISC_A_CLEAR,
57 ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT);
58}
59
60
61static int msm_init_after_reset(struct ehci_ctrl *dev)
62{
63 struct msm_ehci_priv *p = container_of(dev, struct msm_ehci_priv, ctrl);
64 struct usb_ehci *ehci = p->ehci;
65
66 /* select ULPI phy */
67 writel(PORT_PTS_ULPI, &ehci->portsc);
68 setup_usb_phy(p);
69
70 /* Enable sess_vld */
71 setbits_le32(&ehci->genconfig2, GEN2_SESS_VLD_CTRL_EN);
72
73 /* Enable external vbus configuration in the LINK */
74 setbits_le32(&ehci->usbcmd, SESS_VLD_CTRL);
75
76 /* USB_OTG_HS_AHB_BURST */
77 writel(0x0, &ehci->sbuscfg);
78
79 /* USB_OTG_HS_AHB_MODE: HPROT_MODE */
80 /* Bus access related config. */
81 writel(0x08, &ehci->sbusmode);
82
83 /* set mode to host controller */
84 writel(CM_HOST, &ehci->usbmode);
85
86 return 0;
87}
88
89static const struct ehci_ops msm_ehci_ops = {
90 .init_after_reset = msm_init_after_reset
91};
92
93static int ehci_usb_probe(struct udevice *dev)
94{
95 struct msm_ehci_priv *p = dev_get_priv(dev);
96 struct usb_ehci *ehci = p->ehci;
97 struct ehci_hccr *hccr;
98 struct ehci_hcor *hcor;
99 int ret;
100
101 hccr = (struct ehci_hccr *)((phys_addr_t)&ehci->caplength);
102 hcor = (struct ehci_hcor *)((phys_addr_t)hccr +
103 HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
104
105 ret = board_prepare_usb(USB_INIT_HOST);
106 if (ret < 0)
107 return ret;
108
109 return ehci_register(dev, hccr, hcor, &msm_ehci_ops, 0, USB_INIT_HOST);
110}
111
112static int ehci_usb_remove(struct udevice *dev)
113{
114 struct msm_ehci_priv *p = dev_get_priv(dev);
115 struct usb_ehci *ehci = p->ehci;
116 int ret;
117
118 ret = ehci_deregister(dev);
119 if (ret)
120 return ret;
121
122 /* Stop controller. */
123 clrbits_le32(&ehci->usbcmd, CMD_RUN);
124
125 reset_usb_phy(p);
126
127 ret = board_prepare_usb(USB_INIT_DEVICE); /* Board specific hook */
128 if (ret < 0)
129 return ret;
130
131 /* Reset controller */
132 setbits_le32(&ehci->usbcmd, CMD_RESET);
133
134 /* Wait for reset */
Álvaro Fernández Rojas918de032018-01-23 17:14:55 +0100135 if (wait_for_bit_le32(&ehci->usbcmd, CMD_RESET, false, 30, false)) {
Mateusz Kulikowskidc381172016-03-31 23:12:26 +0200136 printf("Stuck on USB reset.\n");
137 return -ETIMEDOUT;
138 }
139
140 return 0;
141}
142
143static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
144{
145 struct msm_ehci_priv *priv = dev_get_priv(dev);
146
147 priv->ulpi_vp.port_num = 0;
Simon Glassba1dea42017-05-17 17:18:05 -0600148 priv->ehci = (void *)devfdt_get_addr(dev);
Mateusz Kulikowskidc381172016-03-31 23:12:26 +0200149
150 if (priv->ehci == (void *)FDT_ADDR_T_NONE)
151 return -EINVAL;
152
153 /* Warning: this will not work if viewport address is > 64 bit due to
154 * ULPI design.
155 */
156 priv->ulpi_vp.viewport_addr = (phys_addr_t)&priv->ehci->ulpi_viewpoint;
157
158 return 0;
159}
160
161static const struct udevice_id ehci_usb_ids[] = {
162 { .compatible = "qcom,ehci-host", },
163 { }
164};
165
166U_BOOT_DRIVER(usb_ehci) = {
167 .name = "ehci_msm",
168 .id = UCLASS_USB,
169 .of_match = ehci_usb_ids,
170 .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
171 .probe = ehci_usb_probe,
172 .remove = ehci_usb_remove,
173 .ops = &ehci_usb_ops,
174 .priv_auto_alloc_size = sizeof(struct msm_ehci_priv),
175 .flags = DM_FLAG_ALLOC_PRIV_DMA,
176};