include/configs/edb93xx.h

/*
 * U-boot - Configuration file for Cirrus Logic EDB93xx boards
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#ifdef CONFIG_edb9301
#define CONFIG_EDB9301
#elif defined(CONFIG_edb9302)
#define CONFIG_EDB9302
#elif defined(CONFIG_edb9302a)
#define CONFIG_EDB9302A
#elif defined(CONFIG_edb9307)
#define CONFIG_EDB9307
#elif defined(CONFIG_edb9307a)
#define CONFIG_EDB9307A
#elif defined(CONFIG_edb9312)
#define CONFIG_EDB9312
#elif defined(CONFIG_edb9315)
#define CONFIG_EDB9315
#elif defined(CONFIG_edb9315a)
#define CONFIG_EDB9315A
#else
#error "no board defined"
#endif

/* Initial environment and monitor configuration options. */
#define CONFIG_BOOTDELAY		2
#define CONFIG_CMDLINE_TAG		1
#define CONFIG_INITRD_TAG		1
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_BOOTARGS		"root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
#define CONFIG_BOOTFILE		"edb93xx.img"

#define CONFIG_SYS_HUSH_PARSER		1
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

#ifdef CONFIG_EDB9301
#define CONFIG_EP9301
#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9301
#define CONFIG_SYS_PROMPT		"EDB9301> "
#define CONFIG_ENV_SECT_SIZE		0x00020000
#elif defined(CONFIG_EDB9302)
#define CONFIG_EP9302
#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9302
#define CONFIG_SYS_PROMPT		"EDB9302> "
#define CONFIG_ENV_SECT_SIZE		0x00020000
#elif defined(CONFIG_EDB9302A)
#define CONFIG_EP9302
#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9302A
#define CONFIG_SYS_PROMPT		"EDB9302A> "
#define CONFIG_ENV_SECT_SIZE		0x00020000
#elif defined(CONFIG_EDB9307)
#define CONFIG_EP9307
#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9307
#define CONFIG_SYS_PROMPT		"EDB9307> "
#define CONFIG_ENV_SECT_SIZE		0x00040000
#elif defined(CONFIG_EDB9307A)
#define CONFIG_EP9307
#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9307A
#define CONFIG_SYS_PROMPT		"EDB9307A> "
#define CONFIG_ENV_SECT_SIZE		0x00040000
#elif defined(CONFIG_EDB9312)
#define CONFIG_EP9312
#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9312
#define CONFIG_SYS_PROMPT		"EDB9312> "
#define CONFIG_ENV_SECT_SIZE		0x00040000
#elif defined(CONFIG_EDB9315)
#define CONFIG_EP9315
#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9315
#define CONFIG_SYS_PROMPT		"EDB9315> "
#define CONFIG_ENV_SECT_SIZE		0x00040000
#elif defined(CONFIG_EDB9315A)
#define CONFIG_EP9315
#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9315A
#define CONFIG_SYS_PROMPT		"EDB9315A> "
#define CONFIG_ENV_SECT_SIZE		0x00040000
#else
#error "no board defined"
#endif

/* High-level configuration options */
#define CONFIG_ARM920T		1		/* This is an ARM920T core... */
#define CONFIG_EP93XX 		1		/* in a Cirrus Logic 93xx SoC */

#define CONFIG_SYS_CLK_FREQ	14745600	/* EP93xx has a 14.7456 clock */
#define CONFIG_SYS_HZ		1000		/* decr freq: 1 ms ticks      */
#undef  CONFIG_USE_IRQ				/* Don't need IRQ/FIQ         */

/* Monitor configuration */
#include <config_cmd_default.h>
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
#undef CONFIG_CMD_XIMG

#undef CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2

#define CONFIG_SYS_LONGHELP			/* Enable "long" help in mon */
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O buffer size */
/* Print buffer size */
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
/* Boot argument buffer size */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MAXARGS	16		/* Max number of command args */

/* Serial port hardware configuration */
#define CONFIG_PL010_SERIAL
#define CONFIG_CONS_INDEX		0
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
#define CONFIG_SYS_SERIAL0		0x808C0000
#define CONFIG_SYS_SERIAL1		0x808D0000
#define CONFIG_PL01x_PORTS	{(void *)CONFIG_SYS_SERIAL0, \
			(void *)CONFIG_SYS_SERIAL1}

/* Status LED */
#define CONFIG_STATUS_LED		1 /* Status LED enabled	*/
#define CONFIG_BOARD_SPECIFIC_LED	1
#define STATUS_LED_GREEN		0
#define STATUS_LED_RED			1
/* Green */
#define STATUS_LED_BIT			STATUS_LED_GREEN
#define STATUS_LED_STATE		STATUS_LED_ON
#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
/* Red */
#define STATUS_LED_BIT1			STATUS_LED_RED
#define STATUS_LED_STATE1		STATUS_LED_OFF
#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
/* Optional value */
#define STATUS_LED_BOOT			STATUS_LED_BIT

/* Network hardware configuration */
#define CONFIG_DRIVER_EP93XX_MAC
#define CONFIG_MII_SUPPRESS_PREAMBLE
#define CONFIG_MII
#define CONFIG_PHY_ADDR		1
#define CONFIG_NET_MULTI
#undef  CONFIG_NETCONSOLE

/* SDRAM configuration */
#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302)
/*
 * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
 * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
 * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
 */
#define CONFIG_NR_DRAM_BANKS		4
#define PHYS_SDRAM_1			0x00000000
#define PHYS_SDRAM_SIZE_1		0x00800000
#define PHYS_SDRAM_2			0x01000000
#define PHYS_SDRAM_SIZE_2		0x00800000
#define PHYS_SDRAM_3			0x04000000
#define PHYS_SDRAM_SIZE_3		0x00800000
#define PHYS_SDRAM_4			0x05000000
#define PHYS_SDRAM_SIZE_4		0x00800000
#define CONFIG_EDB93XX_SDCS3
#define CONFIG_SYS_MEMTEST_START	0x00100000
#define CONFIG_SYS_MEMTEST_END		0x007fffff

#elif defined(CONFIG_EDB9302A)
/*
 * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
 * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
 * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
 */
#define CONFIG_NR_DRAM_BANKS		4
#define PHYS_SDRAM_1			0xc0000000
#define PHYS_SDRAM_SIZE_1		0x00800000
#define PHYS_SDRAM_2			0xc1000000
#define PHYS_SDRAM_SIZE_2		0x00800000
#define PHYS_SDRAM_3			0xc4000000
#define PHYS_SDRAM_SIZE_3		0x00800000
#define PHYS_SDRAM_4			0xc5000000
#define PHYS_SDRAM_SIZE_4		0x00800000
#define CONFIG_EDB93XX_SDCS0
#define CONFIG_SYS_MEMTEST_START	0xc0100000
#define CONFIG_SYS_MEMTEST_END		0xc07fffff

#elif defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
	defined(CONFIG_EDB9315)
/*
 * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
 * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
 * 64 MB of SDRAM.
 */
#define CONFIG_NR_DRAM_BANKS		2
#define PHYS_SDRAM_1			0x00000000
#define PHYS_SDRAM_SIZE_1		0x02000000
#define PHYS_SDRAM_2			0x04000000
#define PHYS_SDRAM_SIZE_2		0x02000000
#define CONFIG_EDB93XX_SDCS3
#define CONFIG_SYS_MEMTEST_START	0x00100000
#define CONFIG_SYS_MEMTEST_END		0x01e00000

#elif defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
/*
 * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
 * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
 */
#define CONFIG_NR_DRAM_BANKS		2
#define PHYS_SDRAM_1			0xc0000000
#define PHYS_SDRAM_SIZE_1		0x02000000
#define PHYS_SDRAM_2			0xc4000000
#define PHYS_SDRAM_SIZE_2		0x02000000
#define CONFIG_EDB93XX_SDCS0
#define CONFIG_SYS_MEMTEST_START	0xc0100000
#define CONFIG_SYS_MEMTEST_END		0xc1e00000
#endif

/* Default load address */
#define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x01000000)

/* Must match kernel config */
#define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)

/* Run-time memory allocatons */
#define CONFIG_SYS_GBL_DATA_SIZE	128
#define CONFIG_STACKSIZE		(128 * 1024)

#if defined(CONFIG_USE_IRQ)
#define CONFIG_STACKSIZE_IRQ	(4 * 1024)
#define CONFIG_STACKSIZE_FIQ	(4 * 1024)
#endif

#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)

/* -----------------------------------------------------------------------------
 * FLASH and environment organization
 *
 * The EDB9301 and EDB9302(a) have 1 bank of flash memory at 0x60000000
 * consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit data bus,
 * for a total of 16 MB of CFI-compatible flash.
 *
 * The EDB9307(a), EDB9312, and EDB9315(a) have 1 bank of flash memory at
 * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
 * data bus, for a total of 32 MB of CFI-compatible flash.
 *
 *                            EDB9301/02(a)          EDB9307(a)/12/15(a)
 * 0x60000000 - 0x0003FFFF    u-boot                 u-boot
 * 0x60040000 - 0x0005FFFF    environment #1         environment #1
 * 0x60060000 - 0x0007FFFF    environment #2         environment #1 (continued)
 * 0x60080000 - 0x0009FFFF    unused                 environment #2
 * 0x600A0000 - 0x000BFFFF    unused                 environment #2 (continued)
 * 0x600C0000 - 0x00FFFFFF    unused                 unused
 * 0x61000000 - 0x01FFFFFF    not present            unused
 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	128

#define PHYS_FLASH_1			0x60000000
#define CONFIG_SYS_FLASH_BASE		(PHYS_FLASH_1)
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)

#define CONFIG_ENV_OVERWRITE		/* Vendor params unprotected */
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR			0x60040000

#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)

#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE

#endif /* !defined (__CONFIG_H) */