Svyatoslav Ryhel | 85aecf8 | 2023-10-27 11:26:11 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright(C) 2023 Svyatoslav Ryhel <clamor95@gmail.com> |
| 4 | */ |
| 5 | |
| 6 | #include <dm.h> |
| 7 | #include <power/pmic.h> |
| 8 | #include <power/regulator.h> |
| 9 | #include <power/max77663.h> |
| 10 | |
| 11 | /* fist row is control registers, second is voltage registers */ |
| 12 | static const char max77663_sd_reg[][MAX77663_SD_NUM] = { |
| 13 | { 0x1d, 0x1e, 0x1f, 0x20, 0x21 }, |
| 14 | { 0x16, 0x17, 0x18, 0x19, 0x2a }, |
| 15 | }; |
| 16 | |
| 17 | static const char max77663_ldo_reg[MAX77663_LDO_NUM] = { |
| 18 | 0x23, 0x25, 0x27, 0x29, 0x2b, 0x2d, 0x2f, 0x31, 0x33 |
| 19 | }; |
| 20 | |
| 21 | static int max77663_sd_enable(struct udevice *dev, int op, bool *enable) |
| 22 | { |
| 23 | struct dm_regulator_uclass_plat *uc_pdata = |
| 24 | dev_get_uclass_plat(dev); |
| 25 | u32 adr = uc_pdata->ctrl_reg; |
| 26 | int val, ret; |
| 27 | |
| 28 | val = pmic_reg_read(dev->parent, adr); |
| 29 | if (val < 0) |
| 30 | return val; |
| 31 | |
| 32 | if (op == PMIC_OP_GET) { |
| 33 | if (val & SD_STATUS_MASK) |
| 34 | *enable = true; |
| 35 | else |
| 36 | *enable = false; |
| 37 | |
| 38 | return 0; |
| 39 | } else if (op == PMIC_OP_SET) { |
| 40 | val &= ~SD_STATUS_MASK; |
| 41 | |
| 42 | if (*enable) |
| 43 | val |= SD_STATUS_MASK; |
| 44 | |
| 45 | ret = pmic_reg_write(dev->parent, adr, val); |
| 46 | if (ret) |
| 47 | return ret; |
| 48 | } |
| 49 | |
| 50 | return 0; |
| 51 | } |
| 52 | |
| 53 | /** |
| 54 | * max77663_*_volt2hex() - convert voltage in uV into |
| 55 | * applicable to register hex value |
| 56 | * |
| 57 | * @idx: regulator index |
| 58 | * @uV: voltage in uV |
| 59 | * |
| 60 | * Return: voltage in hex on success, -ve on failure |
| 61 | */ |
| 62 | static int max77663_sd_volt2hex(int idx, int uV) |
| 63 | { |
| 64 | switch (idx) { |
| 65 | case 0: |
| 66 | /* SD0 has max voltage 1.4V */ |
| 67 | if (uV > SD0_VOLT_MAX) |
| 68 | return -EINVAL; |
| 69 | break; |
| 70 | case 1: |
| 71 | /* SD1 has max voltage 1.55V */ |
| 72 | if (uV > SD1_VOLT_MAX) |
| 73 | return -EINVAL; |
| 74 | break; |
| 75 | default: |
| 76 | /* SD2 and SD3 have max voltage 3.79V */ |
| 77 | if (uV > SD_VOLT_MAX) |
| 78 | return -EINVAL; |
| 79 | break; |
| 80 | }; |
| 81 | |
| 82 | if (uV < SD_VOLT_MIN) |
| 83 | uV = SD_VOLT_MIN; |
| 84 | |
| 85 | return (uV - SD_VOLT_BASE) / 12500; |
| 86 | } |
| 87 | |
| 88 | /** |
| 89 | * max77663_*_hex2volt() - convert register hex value into |
| 90 | * actual voltage in uV |
| 91 | * |
| 92 | * @idx: regulator index |
| 93 | * @hex: hex value of register |
| 94 | * |
| 95 | * Return: voltage in uV on success, -ve on failure |
| 96 | */ |
| 97 | static int max77663_sd_hex2volt(int idx, int hex) |
| 98 | { |
| 99 | switch (idx) { |
| 100 | case 0: |
| 101 | /* SD0 has max voltage 1.4V */ |
| 102 | if (hex > SD0_VOLT_MAX_HEX) |
| 103 | return -EINVAL; |
| 104 | break; |
| 105 | case 1: |
| 106 | /* SD1 has max voltage 1.55V */ |
| 107 | if (hex > SD1_VOLT_MAX_HEX) |
| 108 | return -EINVAL; |
| 109 | break; |
| 110 | default: |
| 111 | /* SD2 and SD3 have max voltage 3.79V */ |
| 112 | if (hex > SD_VOLT_MAX_HEX) |
| 113 | return -EINVAL; |
| 114 | break; |
| 115 | }; |
| 116 | |
| 117 | if (hex < SD_VOLT_MIN_HEX) |
| 118 | hex = SD_VOLT_MIN_HEX; |
| 119 | |
| 120 | return SD_VOLT_BASE + hex * 12500; |
| 121 | } |
| 122 | |
| 123 | static int max77663_sd_val(struct udevice *dev, int op, int *uV) |
| 124 | { |
| 125 | struct dm_regulator_uclass_plat *uc_pdata = |
| 126 | dev_get_uclass_plat(dev); |
| 127 | u32 adr = uc_pdata->volt_reg; |
| 128 | int idx = dev->driver_data; |
| 129 | int hex, ret; |
| 130 | |
| 131 | if (op == PMIC_OP_GET) { |
| 132 | hex = pmic_reg_read(dev->parent, adr); |
| 133 | if (hex < 0) |
| 134 | return hex; |
| 135 | |
| 136 | *uV = 0; |
| 137 | |
| 138 | ret = max77663_sd_hex2volt(idx, hex); |
| 139 | if (ret < 0) |
| 140 | return ret; |
| 141 | *uV = ret; |
| 142 | |
| 143 | return 0; |
| 144 | } |
| 145 | |
| 146 | /* SD regulators use entire register for voltage */ |
| 147 | hex = max77663_sd_volt2hex(idx, *uV); |
| 148 | if (hex < 0) |
| 149 | return hex; |
| 150 | |
| 151 | return pmic_reg_write(dev->parent, adr, hex); |
| 152 | } |
| 153 | |
| 154 | static int max77663_sd_probe(struct udevice *dev) |
| 155 | { |
| 156 | struct dm_regulator_uclass_plat *uc_pdata = |
| 157 | dev_get_uclass_plat(dev); |
| 158 | int idx = dev->driver_data; |
| 159 | |
| 160 | uc_pdata->type = REGULATOR_TYPE_BUCK; |
| 161 | uc_pdata->ctrl_reg = max77663_sd_reg[0][idx]; |
| 162 | uc_pdata->volt_reg = max77663_sd_reg[1][idx]; |
| 163 | |
| 164 | return 0; |
| 165 | } |
| 166 | |
| 167 | static int sd_get_value(struct udevice *dev) |
| 168 | { |
| 169 | int uV; |
| 170 | int ret; |
| 171 | |
| 172 | ret = max77663_sd_val(dev, PMIC_OP_GET, &uV); |
| 173 | if (ret) |
| 174 | return ret; |
| 175 | |
| 176 | return uV; |
| 177 | } |
| 178 | |
| 179 | static int sd_set_value(struct udevice *dev, int uV) |
| 180 | { |
| 181 | return max77663_sd_val(dev, PMIC_OP_SET, &uV); |
| 182 | } |
| 183 | |
| 184 | static int sd_get_enable(struct udevice *dev) |
| 185 | { |
| 186 | bool enable = false; |
| 187 | int ret; |
| 188 | |
| 189 | ret = max77663_sd_enable(dev, PMIC_OP_GET, &enable); |
| 190 | if (ret) |
| 191 | return ret; |
| 192 | |
| 193 | return enable; |
| 194 | } |
| 195 | |
| 196 | static int sd_set_enable(struct udevice *dev, bool enable) |
| 197 | { |
| 198 | return max77663_sd_enable(dev, PMIC_OP_SET, &enable); |
| 199 | } |
| 200 | |
| 201 | static const struct dm_regulator_ops max77663_sd_ops = { |
| 202 | .get_value = sd_get_value, |
| 203 | .set_value = sd_set_value, |
| 204 | .get_enable = sd_get_enable, |
| 205 | .set_enable = sd_set_enable, |
| 206 | }; |
| 207 | |
| 208 | U_BOOT_DRIVER(max77663_sd) = { |
| 209 | .name = MAX77663_SD_DRIVER, |
| 210 | .id = UCLASS_REGULATOR, |
| 211 | .ops = &max77663_sd_ops, |
| 212 | .probe = max77663_sd_probe, |
| 213 | }; |
| 214 | |
| 215 | static int max77663_ldo_enable(struct udevice *dev, int op, bool *enable) |
| 216 | { |
| 217 | struct dm_regulator_uclass_plat *uc_pdata = |
| 218 | dev_get_uclass_plat(dev); |
| 219 | u32 adr = uc_pdata->ctrl_reg; |
| 220 | int val, ret; |
| 221 | |
| 222 | val = pmic_reg_read(dev->parent, adr); |
| 223 | if (val < 0) |
| 224 | return val; |
| 225 | |
| 226 | if (op == PMIC_OP_GET) { |
| 227 | if (val & LDO_STATUS_MASK) |
| 228 | *enable = true; |
| 229 | else |
| 230 | *enable = false; |
| 231 | |
| 232 | return 0; |
| 233 | } else if (op == PMIC_OP_SET) { |
| 234 | val &= ~LDO_STATUS_MASK; |
| 235 | |
| 236 | if (*enable) |
| 237 | val |= LDO_STATUS_MASK; |
| 238 | |
| 239 | ret = pmic_reg_write(dev->parent, adr, val); |
| 240 | if (ret) |
| 241 | return ret; |
| 242 | } |
| 243 | |
| 244 | return 0; |
| 245 | } |
| 246 | |
| 247 | static int max77663_ldo_volt2hex(int idx, int uV) |
| 248 | { |
| 249 | switch (idx) { |
| 250 | case 0: |
| 251 | case 1: |
| 252 | if (uV > LDO01_VOLT_MAX) |
| 253 | return -EINVAL; |
| 254 | |
| 255 | return (uV - LDO_VOLT_BASE) / 25000; |
| 256 | case 4: |
| 257 | if (uV > LDO4_VOLT_MAX) |
| 258 | return -EINVAL; |
| 259 | |
| 260 | return (uV - LDO_VOLT_BASE) / 12500; |
| 261 | default: |
| 262 | if (uV > LDO_VOLT_MAX) |
| 263 | return -EINVAL; |
| 264 | |
| 265 | return (uV - LDO_VOLT_BASE) / 50000; |
| 266 | }; |
| 267 | } |
| 268 | |
| 269 | static int max77663_ldo_hex2volt(int idx, int hex) |
| 270 | { |
| 271 | if (hex > LDO_VOLT_MAX_HEX) |
| 272 | return -EINVAL; |
| 273 | |
| 274 | switch (idx) { |
| 275 | case 0: |
| 276 | case 1: |
| 277 | return (hex * 25000) + LDO_VOLT_BASE; |
| 278 | case 4: |
| 279 | return (hex * 12500) + LDO_VOLT_BASE; |
| 280 | default: |
| 281 | return (hex * 50000) + LDO_VOLT_BASE; |
| 282 | }; |
| 283 | } |
| 284 | |
| 285 | static int max77663_ldo_val(struct udevice *dev, int op, int *uV) |
| 286 | { |
| 287 | struct dm_regulator_uclass_plat *uc_pdata = |
| 288 | dev_get_uclass_plat(dev); |
| 289 | u32 adr = uc_pdata->ctrl_reg; |
| 290 | int idx = dev->driver_data; |
| 291 | int hex, val, ret; |
| 292 | |
| 293 | val = pmic_reg_read(dev->parent, adr); |
| 294 | if (val < 0) |
| 295 | return val; |
| 296 | |
| 297 | if (op == PMIC_OP_GET) { |
| 298 | *uV = 0; |
| 299 | |
| 300 | ret = max77663_ldo_hex2volt(idx, val & LDO_VOLT_MASK); |
| 301 | if (ret < 0) |
| 302 | return ret; |
| 303 | |
| 304 | *uV = ret; |
| 305 | return 0; |
| 306 | } |
| 307 | |
| 308 | hex = max77663_ldo_volt2hex(idx, *uV); |
| 309 | if (hex < 0) |
| 310 | return hex; |
| 311 | |
| 312 | val &= ~LDO_VOLT_MASK; |
| 313 | |
| 314 | return pmic_reg_write(dev->parent, adr, val | hex); |
| 315 | } |
| 316 | |
| 317 | static int max77663_ldo_probe(struct udevice *dev) |
| 318 | { |
| 319 | struct dm_regulator_uclass_plat *uc_pdata = |
| 320 | dev_get_uclass_plat(dev); |
| 321 | int idx = dev->driver_data; |
| 322 | |
| 323 | uc_pdata->type = REGULATOR_TYPE_LDO; |
| 324 | uc_pdata->ctrl_reg = max77663_ldo_reg[idx]; |
| 325 | |
| 326 | return 0; |
| 327 | } |
| 328 | |
| 329 | static int ldo_get_value(struct udevice *dev) |
| 330 | { |
| 331 | int uV; |
| 332 | int ret; |
| 333 | |
| 334 | ret = max77663_ldo_val(dev, PMIC_OP_GET, &uV); |
| 335 | if (ret) |
| 336 | return ret; |
| 337 | |
| 338 | return uV; |
| 339 | } |
| 340 | |
| 341 | static int ldo_set_value(struct udevice *dev, int uV) |
| 342 | { |
| 343 | return max77663_ldo_val(dev, PMIC_OP_SET, &uV); |
| 344 | } |
| 345 | |
| 346 | static int ldo_get_enable(struct udevice *dev) |
| 347 | { |
| 348 | bool enable = false; |
| 349 | int ret; |
| 350 | |
| 351 | ret = max77663_ldo_enable(dev, PMIC_OP_GET, &enable); |
| 352 | if (ret) |
| 353 | return ret; |
| 354 | |
| 355 | return enable; |
| 356 | } |
| 357 | |
| 358 | static int ldo_set_enable(struct udevice *dev, bool enable) |
| 359 | { |
| 360 | return max77663_ldo_enable(dev, PMIC_OP_SET, &enable); |
| 361 | } |
| 362 | |
| 363 | static const struct dm_regulator_ops max77663_ldo_ops = { |
| 364 | .get_value = ldo_get_value, |
| 365 | .set_value = ldo_set_value, |
| 366 | .get_enable = ldo_get_enable, |
| 367 | .set_enable = ldo_set_enable, |
| 368 | }; |
| 369 | |
| 370 | U_BOOT_DRIVER(max77663_ldo) = { |
| 371 | .name = MAX77663_LDO_DRIVER, |
| 372 | .id = UCLASS_REGULATOR, |
| 373 | .ops = &max77663_ldo_ops, |
| 374 | .probe = max77663_ldo_probe, |
| 375 | }; |