blob: 77a12de963d9f5fff028ecfb5b5a1176ef075ad7 [file] [log] [blame]
Nobuhiro Iwamatsufdf7c652016-04-01 03:51:36 +09001/*
2 * include/configs/salvator-x.h
3 * This file is Salvator-X board configuration.
4 *
5 * Copyright (C) 2015 Renesas Electronics Corporation
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10#ifndef __SALVATOR_X_H
11#define __SALVATOR_X_H
12
13#undef DEBUG
14
15#define CONFIG_RCAR_BOARD_STRING "Salvator-X"
16
17#include "rcar-gen3-common.h"
18
19/* SCIF */
Nobuhiro Iwamatsufdf7c652016-04-01 03:51:36 +090020#define CONFIG_CONS_SCIF2
21#define CONFIG_CONS_INDEX 2
Marek Vasutff178222017-05-13 15:57:45 +020022#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_S3D4_CLK_FREQ
Nobuhiro Iwamatsufdf7c652016-04-01 03:51:36 +090023
24/* [A] Hyper Flash */
25/* use to RPC(SPI Multi I/O Bus Controller) */
Nobuhiro Iwamatsufdf7c652016-04-01 03:51:36 +090026
Marek Vasut51e80062017-05-13 15:57:47 +020027/* Ethernet RAVB */
Marek Vasut51e80062017-05-13 15:57:47 +020028#define CONFIG_BITBANGMII
29#define CONFIG_BITBANGMII_MULTI
30
Nobuhiro Iwamatsufdf7c652016-04-01 03:51:36 +090031/* Board Clock */
32/* XTAL_CLK : 33.33MHz */
33#define RCAR_XTAL_CLK 33333333u
34#define CONFIG_SYS_CLK_FREQ RCAR_XTAL_CLK
35/* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */
Marek Vasutff178222017-05-13 15:57:45 +020036/* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz */
Nobuhiro Iwamatsufdf7c652016-04-01 03:51:36 +090037#define CONFIG_CP_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
38#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 192 / 2)
39#define CONFIG_S3D2_CLK_FREQ (266666666u/2)
Marek Vasutff178222017-05-13 15:57:45 +020040#define CONFIG_S3D4_CLK_FREQ (266666666u/4)
Nobuhiro Iwamatsufdf7c652016-04-01 03:51:36 +090041
42/* Generic Timer Definitions (use in assembler source) */
43#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */
44
45/* Generic Interrupt Controller Definitions */
46#define CONFIG_GICV2
47#define GICD_BASE 0xF1010000
48#define GICC_BASE 0xF1020000
49
Marek Vasutc16ed0b2017-05-13 15:57:48 +020050/* i2c */
51#define CONFIG_SYS_I2C
52#define CONFIG_SYS_I2C_SH
53#define CONFIG_SYS_I2C_SLAVE 0x60
54#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 1
55#define CONFIG_SYS_I2C_SH_SPEED0 400000
56#define CONFIG_SH_I2C_DATA_HIGH 4
57#define CONFIG_SH_I2C_DATA_LOW 5
58#define CONFIG_SH_I2C_CLOCK 10000000
59
60#define CONFIG_SYS_I2C_POWERIC_ADDR 0x30
61
Marek Vasut4659a622017-05-13 15:57:49 +020062/* USB */
63#ifdef CONFIG_R8A7795
64#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
65#else
66#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
67#endif
68
Marek Vasut5abb39b2017-05-13 15:57:46 +020069/* SDHI */
70#define CONFIG_SH_SDHI_FREQ 200000000
71
72/* Environment in eMMC, at the end of 2nd "boot sector" */
Marek Vasut5abb39b2017-05-13 15:57:46 +020073#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
74#define CONFIG_SYS_MMC_ENV_DEV 1
75#define CONFIG_SYS_MMC_ENV_PART 2
76
Nobuhiro Iwamatsufdf7c652016-04-01 03:51:36 +090077/* Module stop status bits */
78/* MFIS, SCIF1 */
79#define CONFIG_SMSTP2_ENA 0x00002040
Marek Vasuta21e30e2017-05-13 15:57:51 +020080/* SCIF2 */
81#define CONFIG_SMSTP3_ENA 0x00000400
Nobuhiro Iwamatsufdf7c652016-04-01 03:51:36 +090082/* INTC-AP, IRQC */
83#define CONFIG_SMSTP4_ENA 0x00000180
84
85#endif /* __SALVATOR_X_H */