Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / d9d592b74c2c398651a1a9fceda50c479e030966 / . / board / gdsys / common / adv7611.c
blob: c416bf1dc42cfbccd700727c152095a142ca285f [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -0400[diff] [blame]1// SPDX-License-Identifier: GPL-2.0+
Dirk Eibachb355f172015-10-28 11:46:32 +0100[diff] [blame]2/*
3 * (C) Copyright 2014
Mario Sixb4893582018-03-06 08:04:58 +0100[diff] [blame]4 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
Dirk Eibachb355f172015-10-28 11:46:32 +0100[diff] [blame]5 */
6
7#include <common.h>
8#include <i2c.h>
9
10#define ADV7611_I2C_ADDR 0x4c
11#define ADV7611_RDINFO 0x2051
12
13/*
14 * ADV7611 I2C Addresses in u-boot notation
15 */
16enum {
17 CP_I2C_ADDR = 0x22,
18 DPLL_I2C_ADDR = 0x26,
19 KSV_I2C_ADDR = 0x32,
20 HDMI_I2C_ADDR = 0x34,
21 EDID_I2C_ADDR = 0x36,
22 INFOFRAME_I2C_ADDR = 0x3e,
23 CEC_I2C_ADDR = 0x40,
24 IO_I2C_ADDR = ADV7611_I2C_ADDR,
25};
26
27/*
28 * Global Control Registers
29 */
30enum {
31 IO_RD_INFO_MSB = 0xea,
32 IO_RD_INFO_LSB = 0xeb,
33 IO_CEC_ADDR = 0xf4,
34 IO_INFOFRAME_ADDR = 0xf5,
35 IO_DPLL_ADDR = 0xf8,
36 IO_KSV_ADDR = 0xf9,
37 IO_EDID_ADDR = 0xfa,
38 IO_HDMI_ADDR = 0xfb,
39 IO_CP_ADDR = 0xfd,
40};
41
42int adv7611_i2c[] = CONFIG_SYS_ADV7611_I2C;
43
44int adv7611_probe(unsigned int screen)
45{
46 int old_bus = i2c_get_bus_num();
47 unsigned int rd_info;
48 int res = 0;
49
50 i2c_set_bus_num(adv7611_i2c[screen]);
51
52 rd_info = (i2c_reg_read(IO_I2C_ADDR, IO_RD_INFO_MSB) << 8)
53 | i2c_reg_read(IO_I2C_ADDR, IO_RD_INFO_LSB);
54
55 if (rd_info != ADV7611_RDINFO) {
56 res = -1;
57 goto out;
58 }
59
60 /*
61 * set I2C addresses to default values
62 */
63 i2c_reg_write(IO_I2C_ADDR, IO_CEC_ADDR, CEC_I2C_ADDR << 1);
64 i2c_reg_write(IO_I2C_ADDR, IO_INFOFRAME_ADDR, INFOFRAME_I2C_ADDR << 1);
65 i2c_reg_write(IO_I2C_ADDR, IO_DPLL_ADDR, DPLL_I2C_ADDR << 1);
66 i2c_reg_write(IO_I2C_ADDR, IO_KSV_ADDR, KSV_I2C_ADDR << 1);
67 i2c_reg_write(IO_I2C_ADDR, IO_EDID_ADDR, EDID_I2C_ADDR << 1);
68 i2c_reg_write(IO_I2C_ADDR, IO_HDMI_ADDR, HDMI_I2C_ADDR << 1);
69 i2c_reg_write(IO_I2C_ADDR, IO_CP_ADDR, CP_I2C_ADDR << 1);
70
71 /*
72 * do magic initialization sequence from
73 * "ADV7611 Register Settings Recommendations Revision 1.5"
74 * with most registers undocumented
75 */
76 i2c_reg_write(CP_I2C_ADDR, 0x6c, 0x00);
77 i2c_reg_write(HDMI_I2C_ADDR, 0x9b, 0x03);
78 i2c_reg_write(HDMI_I2C_ADDR, 0x6f, 0x08);
79 i2c_reg_write(HDMI_I2C_ADDR, 0x85, 0x1f);
80 i2c_reg_write(HDMI_I2C_ADDR, 0x87, 0x70);
81 i2c_reg_write(HDMI_I2C_ADDR, 0x57, 0xda);
82 i2c_reg_write(HDMI_I2C_ADDR, 0x58, 0x01);
83 i2c_reg_write(HDMI_I2C_ADDR, 0x03, 0x98);
84 i2c_reg_write(HDMI_I2C_ADDR, 0x4c, 0x44);
85
86 /*
87 * IO_REG_02, default 0xf0
88 *
89 * INP_COLOR_SPACE (IO, Address 0x02[7:4])
90 * default: 0b1111 auto
91 * set to : 0b0001 force RGB (range 0 to 255) input
92 *
93 * RGB_OUT (IO, Address 0x02[1])
94 * default: 0 YPbPr color space output
95 * set to : 1 RGB color space output
96 */
97 i2c_reg_write(IO_I2C_ADDR, 0x02, 0x12);
98
99 /*
100 * IO_REG_03, default 0x00
101 *
102 * OP_FORMAT_SEL (IO, Address 0x03[7:0])
103 * default: 0x00 8-bit SDR ITU-656 mode
104 * set to : 0x40 24-bit 4:4:4 SDR mode
105 */
106 i2c_reg_write(IO_I2C_ADDR, 0x03, 0x40);
107
108 /*
109 * IO_REG_05, default 0x2c
110 *
111 * AVCODE_INSERT_EN (IO, Address 0x05[2])
112 * default: 1 insert AV codes into data stream
113 * set to : 0 do not insert AV codes into data stream
114 */
115 i2c_reg_write(IO_I2C_ADDR, 0x05, 0x28);
116
117 /*
118 * IO_REG_0C, default 0x62
119 *
120 * POWER_DOWN (IO, Address 0x0C[5])
121 * default: 1 chip is powered down
122 * set to : 0 chip is operational
123 */
124 i2c_reg_write(IO_I2C_ADDR, 0x0c, 0x42);
125
126 /*
127 * IO_REG_15, default 0xbe
128 *
129 * TRI_SYNCS (IO, Address 0x15[3)
130 * TRI_LLC (IO, Address 0x15[2])
131 * TRI_PIX (IO, Address 0x15[1])
132 * default: 1 video output pins are tristate
133 * set to : 0 video output pins are active
134 */
135 i2c_reg_write(IO_I2C_ADDR, 0x15, 0xb0);
136
137 /*
138 * HDMI_REGISTER_02H, default 0xff
139 *
140 * CLOCK_TERMA_DISABLE (HDMI, Address 0x83[0])
141 * default: 1 disable termination
142 * set to : 0 enable termination
143 * Future options are:
144 * - use the chips automatic termination control
145 * - set this manually on cable detect
146 * but at the moment this seems a safe default.
147 */
148 i2c_reg_write(HDMI_I2C_ADDR, 0x83, 0xfe);
149
150 /*
151 * HDMI_CP_CNTRL_1, default 0x01
152 *
153 * HDMI_FRUN_EN (CP, Address 0xBA[0])
154 * default: 1 Enable the free run feature in HDMI mode
155 * set to : 0 Disable the free run feature in HDMI mode
156 */
157 i2c_reg_write(CP_I2C_ADDR, 0xba, 0x00);
158
159 /*
160 * INT1_CONFIGURATION, default 0x20
161 *
162 * INTRQ_DUR_SEL[1:0] (IO, Address 0x40[7:6])
163 * default: 00 Interrupt signal is active for 4 Xtal periods
164 * set to : 11 Active until cleared
165 *
166 * INTRQ_OP_SEL[1:0] (IO, Address 0x40[1:0])
167 * default: 00 Open drain
168 * set to : 10 Drives high when active
169 */
170 i2c_reg_write(IO_I2C_ADDR, 0x40, 0xc2);
171
172out:
173 i2c_set_bus_num(old_bus);
174
175 return res;
176}