Alex Marginean | ab8c2a5 | 2019-07-12 10:13:50 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * (C) Copyright 2019 |
| 4 | * Alex Marginean, NXP |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <dm.h> |
| 9 | #include <miiphy.h> |
| 10 | #include <dm/device-internal.h> |
| 11 | #include <dm/uclass-internal.h> |
| 12 | #include <dm/lists.h> |
| 13 | |
| 14 | #define MDIO_MUX_CHILD_DRV_NAME "mdio-mux-bus-drv" |
| 15 | |
| 16 | /** |
| 17 | * struct mdio_mux_perdev_priv - Per-device class data for MDIO MUX DM |
| 18 | * |
| 19 | * @parent_mdio: Parent DM MDIO device, this is called for actual MDIO I/O after |
| 20 | * setting up the mux. Typically this is a real MDIO device, |
| 21 | * unless there are cascaded muxes. |
| 22 | * @selected: Current child bus selection. Defaults to -1 |
| 23 | */ |
| 24 | struct mdio_mux_perdev_priv { |
| 25 | struct udevice *mdio_parent; |
| 26 | int selected; |
| 27 | }; |
| 28 | |
| 29 | /* |
| 30 | * This source file uses three types of devices, as follows: |
| 31 | * - mux is the hardware MDIO MUX which selects between the existing child MDIO |
| 32 | * buses, this is the device relevant for MDIO MUX class of drivers. |
| 33 | * - ch is a child MDIO bus, this is just a representation of a mux selection, |
| 34 | * not a real piece of hardware. |
| 35 | * - mdio_parent is the actual MDIO bus called to perform reads/writes after |
| 36 | * the MUX is configured. Typically this is a real MDIO device, unless there |
| 37 | * are cascaded muxes. |
| 38 | */ |
| 39 | |
| 40 | /** |
| 41 | * struct mdio_mux_ch_data - Per-device data for child MDIOs |
| 42 | * |
| 43 | * @sel: Selection value used by the MDIO MUX to access this child MDIO bus |
| 44 | */ |
| 45 | struct mdio_mux_ch_data { |
| 46 | int sel; |
| 47 | }; |
| 48 | |
| 49 | static struct udevice *mmux_get_parent_mdio(struct udevice *mux) |
| 50 | { |
| 51 | struct mdio_mux_perdev_priv *pdata = dev_get_uclass_priv(mux); |
| 52 | |
| 53 | return pdata->mdio_parent; |
| 54 | } |
| 55 | |
| 56 | static struct mdio_ops *mmux_get_mdio_parent_ops(struct udevice *mux) |
| 57 | { |
| 58 | return mdio_get_ops(mmux_get_parent_mdio(mux)); |
| 59 | } |
| 60 | |
| 61 | /* call driver select function before performing MDIO r/w */ |
| 62 | static int mmux_change_sel(struct udevice *ch, bool sel) |
| 63 | { |
| 64 | struct udevice *mux = ch->parent; |
| 65 | struct mdio_mux_perdev_priv *priv = dev_get_uclass_priv(mux); |
| 66 | struct mdio_mux_ops *ops = mdio_mux_get_ops(mux); |
| 67 | struct mdio_mux_ch_data *ch_data = dev_get_parent_platdata(ch); |
| 68 | int err = 0; |
| 69 | |
| 70 | if (sel) { |
| 71 | err = ops->select(mux, priv->selected, ch_data->sel); |
| 72 | if (err) |
| 73 | return err; |
| 74 | |
| 75 | priv->selected = ch_data->sel; |
| 76 | } else { |
| 77 | if (ops->deselect) { |
| 78 | ops->deselect(mux, ch_data->sel); |
| 79 | priv->selected = MDIO_MUX_SELECT_NONE; |
| 80 | } |
| 81 | } |
| 82 | |
| 83 | return 0; |
| 84 | } |
| 85 | |
| 86 | /* Read wrapper, sets up the mux before issuing a read on parent MDIO bus */ |
| 87 | static int mmux_read(struct udevice *ch, int addr, int devad, |
| 88 | int reg) |
| 89 | { |
| 90 | struct udevice *mux = ch->parent; |
| 91 | struct udevice *parent_mdio = mmux_get_parent_mdio(mux); |
| 92 | struct mdio_ops *parent_ops = mmux_get_mdio_parent_ops(mux); |
| 93 | int err; |
| 94 | |
| 95 | err = mmux_change_sel(ch, true); |
| 96 | if (err) |
| 97 | return err; |
| 98 | |
| 99 | err = parent_ops->read(parent_mdio, addr, devad, reg); |
| 100 | mmux_change_sel(ch, false); |
| 101 | |
| 102 | return err; |
| 103 | } |
| 104 | |
| 105 | /* Write wrapper, sets up the mux before issuing a write on parent MDIO bus */ |
| 106 | static int mmux_write(struct udevice *ch, int addr, int devad, |
| 107 | int reg, u16 val) |
| 108 | { |
| 109 | struct udevice *mux = ch->parent; |
| 110 | struct udevice *parent_mdio = mmux_get_parent_mdio(mux); |
| 111 | struct mdio_ops *parent_ops = mmux_get_mdio_parent_ops(mux); |
| 112 | int err; |
| 113 | |
| 114 | err = mmux_change_sel(ch, true); |
| 115 | if (err) |
| 116 | return err; |
| 117 | |
| 118 | err = parent_ops->write(parent_mdio, addr, devad, reg, val); |
| 119 | mmux_change_sel(ch, false); |
| 120 | |
| 121 | return err; |
| 122 | } |
| 123 | |
| 124 | /* Reset wrapper, sets up the mux before issuing a reset on parent MDIO bus */ |
| 125 | static int mmux_reset(struct udevice *ch) |
| 126 | { |
| 127 | struct udevice *mux = ch->parent; |
| 128 | struct udevice *parent_mdio = mmux_get_parent_mdio(mux); |
| 129 | struct mdio_ops *parent_ops = mmux_get_mdio_parent_ops(mux); |
| 130 | int err; |
| 131 | |
| 132 | /* reset is optional, if it's not implemented just exit */ |
| 133 | if (!parent_ops->reset) |
| 134 | return 0; |
| 135 | |
| 136 | err = mmux_change_sel(ch, true); |
| 137 | if (err) |
| 138 | return err; |
| 139 | |
| 140 | err = parent_ops->reset(parent_mdio); |
| 141 | mmux_change_sel(ch, false); |
| 142 | |
| 143 | return err; |
| 144 | } |
| 145 | |
| 146 | /* Picks up the mux selection value for each child */ |
| 147 | static int dm_mdio_mux_child_post_bind(struct udevice *ch) |
| 148 | { |
| 149 | struct mdio_mux_ch_data *ch_data = dev_get_parent_platdata(ch); |
| 150 | |
| 151 | ch_data->sel = dev_read_u32_default(ch, "reg", MDIO_MUX_SELECT_NONE); |
| 152 | |
| 153 | if (ch_data->sel == MDIO_MUX_SELECT_NONE) |
| 154 | return -EINVAL; |
| 155 | |
| 156 | return 0; |
| 157 | } |
| 158 | |
| 159 | /* Explicitly bind child MDIOs after binding the mux */ |
| 160 | static int dm_mdio_mux_post_bind(struct udevice *mux) |
| 161 | { |
| 162 | ofnode ch_node; |
| 163 | int err, first_err = 0; |
| 164 | |
| 165 | if (!ofnode_valid(mux->node)) { |
| 166 | debug("%s: no mux node found, no child MDIO busses set up\n", |
| 167 | __func__); |
| 168 | return 0; |
| 169 | } |
| 170 | |
| 171 | /* |
| 172 | * we're going by Linux bindings so the child nodes do not have |
| 173 | * compatible strings. We're going through them here and binding to |
| 174 | * them. |
| 175 | */ |
| 176 | dev_for_each_subnode(ch_node, mux) { |
| 177 | struct udevice *ch_dev; |
| 178 | const char *ch_name; |
| 179 | |
| 180 | ch_name = ofnode_get_name(ch_node); |
| 181 | |
| 182 | err = device_bind_driver_to_node(mux, MDIO_MUX_CHILD_DRV_NAME, |
| 183 | ch_name, ch_node, &ch_dev); |
| 184 | /* try to bind all, but keep 1st error */ |
| 185 | if (err && !first_err) |
| 186 | first_err = err; |
| 187 | } |
| 188 | |
| 189 | return first_err; |
| 190 | } |
| 191 | |
| 192 | /* Get a reference to the parent MDIO bus, it should be bound by now */ |
| 193 | static int dm_mdio_mux_post_probe(struct udevice *mux) |
| 194 | { |
| 195 | struct mdio_mux_perdev_priv *priv = dev_get_uclass_priv(mux); |
| 196 | int err; |
| 197 | |
| 198 | priv->selected = MDIO_MUX_SELECT_NONE; |
| 199 | |
| 200 | /* pick up mdio parent from device tree */ |
| 201 | err = uclass_get_device_by_phandle(UCLASS_MDIO, mux, "mdio-parent-bus", |
| 202 | &priv->mdio_parent); |
| 203 | if (err) { |
| 204 | debug("%s: didn't find mdio-parent-bus\n", __func__); |
| 205 | return err; |
| 206 | } |
| 207 | |
| 208 | return 0; |
| 209 | } |
| 210 | |
| 211 | const struct mdio_ops mmux_child_mdio_ops = { |
| 212 | .read = mmux_read, |
| 213 | .write = mmux_write, |
| 214 | .reset = mmux_reset, |
| 215 | }; |
| 216 | |
| 217 | /* MDIO class driver used for MUX child MDIO buses */ |
| 218 | U_BOOT_DRIVER(mdio_mux_child) = { |
| 219 | .name = MDIO_MUX_CHILD_DRV_NAME, |
| 220 | .id = UCLASS_MDIO, |
| 221 | .ops = &mmux_child_mdio_ops, |
| 222 | }; |
| 223 | |
| 224 | UCLASS_DRIVER(mdio_mux) = { |
| 225 | .id = UCLASS_MDIO_MUX, |
| 226 | .name = "mdio-mux", |
| 227 | .child_post_bind = dm_mdio_mux_child_post_bind, |
| 228 | .post_bind = dm_mdio_mux_post_bind, |
| 229 | .post_probe = dm_mdio_mux_post_probe, |
| 230 | .per_device_auto_alloc_size = sizeof(struct mdio_mux_perdev_priv), |
| 231 | .per_child_platdata_auto_alloc_size = sizeof(struct mdio_mux_ch_data), |
| 232 | }; |