Matthias Kaehlcke | 3b8d1a4 | 2010-01-31 17:39:49 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Cirrus Logic EP93xx ethernet MAC / MII driver. |
| 3 | * |
| 4 | * Copyright (C) 2010, 2009 |
| 5 | * Matthias Kaehlcke <matthias@kaehlcke.net> |
| 6 | * |
| 7 | * Copyright (C) 2004, 2005 |
| 8 | * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com> |
| 9 | * |
| 10 | * Based on the original eth.[ch] Cirrus Logic EP93xx Rev D. Ethernet Driver, |
| 11 | * which is |
| 12 | * |
| 13 | * (C) Copyright 2002 2003 |
| 14 | * Adam Bezanson, Network Audio Technologies, Inc. |
| 15 | * <bezanson@netaudiotech.com> |
| 16 | * |
Wolfgang Denk | d79de1d | 2013-07-08 09:37:19 +0200 | [diff] [blame^] | 17 | * SPDX-License-Identifier: GPL-2.0+ |
Matthias Kaehlcke | 3b8d1a4 | 2010-01-31 17:39:49 +0100 | [diff] [blame] | 18 | */ |
| 19 | |
| 20 | #include <command.h> |
| 21 | #include <common.h> |
| 22 | #include <asm/arch/ep93xx.h> |
| 23 | #include <asm/io.h> |
| 24 | #include <malloc.h> |
| 25 | #include <miiphy.h> |
| 26 | #include <linux/types.h> |
| 27 | #include "ep93xx_eth.h" |
| 28 | |
| 29 | #define GET_PRIV(eth_dev) ((struct ep93xx_priv *)(eth_dev)->priv) |
| 30 | #define GET_REGS(eth_dev) (GET_PRIV(eth_dev)->regs) |
| 31 | |
| 32 | /* ep93xx_miiphy ops forward declarations */ |
Mike Frysinger | 5ff5fdb | 2010-07-27 18:35:08 -0400 | [diff] [blame] | 33 | static int ep93xx_miiphy_read(const char * const dev, unsigned char const addr, |
Matthias Kaehlcke | 3b8d1a4 | 2010-01-31 17:39:49 +0100 | [diff] [blame] | 34 | unsigned char const reg, unsigned short * const value); |
Mike Frysinger | 5ff5fdb | 2010-07-27 18:35:08 -0400 | [diff] [blame] | 35 | static int ep93xx_miiphy_write(const char * const dev, unsigned char const addr, |
Matthias Kaehlcke | 3b8d1a4 | 2010-01-31 17:39:49 +0100 | [diff] [blame] | 36 | unsigned char const reg, unsigned short const value); |
| 37 | |
| 38 | #if defined(EP93XX_MAC_DEBUG) |
| 39 | /** |
| 40 | * Dump ep93xx_mac values to the terminal. |
| 41 | */ |
| 42 | static void dump_dev(struct eth_device *dev) |
| 43 | { |
| 44 | struct ep93xx_priv *priv = GET_PRIV(dev); |
| 45 | int i; |
| 46 | |
| 47 | printf("\ndump_dev()\n"); |
| 48 | printf(" rx_dq.base %p\n", priv->rx_dq.base); |
| 49 | printf(" rx_dq.current %p\n", priv->rx_dq.current); |
| 50 | printf(" rx_dq.end %p\n", priv->rx_dq.end); |
| 51 | printf(" rx_sq.base %p\n", priv->rx_sq.base); |
| 52 | printf(" rx_sq.current %p\n", priv->rx_sq.current); |
| 53 | printf(" rx_sq.end %p\n", priv->rx_sq.end); |
| 54 | |
| 55 | for (i = 0; i < NUMRXDESC; i++) |
| 56 | printf(" rx_buffer[%2.d] %p\n", i, NetRxPackets[i]); |
| 57 | |
| 58 | printf(" tx_dq.base %p\n", priv->tx_dq.base); |
| 59 | printf(" tx_dq.current %p\n", priv->tx_dq.current); |
| 60 | printf(" tx_dq.end %p\n", priv->tx_dq.end); |
| 61 | printf(" tx_sq.base %p\n", priv->tx_sq.base); |
| 62 | printf(" tx_sq.current %p\n", priv->tx_sq.current); |
| 63 | printf(" tx_sq.end %p\n", priv->tx_sq.end); |
| 64 | } |
| 65 | |
| 66 | /** |
| 67 | * Dump all RX status queue entries to the terminal. |
| 68 | */ |
| 69 | static void dump_rx_status_queue(struct eth_device *dev) |
| 70 | { |
| 71 | struct ep93xx_priv *priv = GET_PRIV(dev); |
| 72 | int i; |
| 73 | |
| 74 | printf("\ndump_rx_status_queue()\n"); |
| 75 | printf(" descriptor address word1 word2\n"); |
| 76 | for (i = 0; i < NUMRXDESC; i++) { |
| 77 | printf(" [ %p ] %08X %08X\n", |
| 78 | priv->rx_sq.base + i, |
| 79 | (priv->rx_sq.base + i)->word1, |
| 80 | (priv->rx_sq.base + i)->word2); |
| 81 | } |
| 82 | } |
| 83 | |
| 84 | /** |
| 85 | * Dump all RX descriptor queue entries to the terminal. |
| 86 | */ |
| 87 | static void dump_rx_descriptor_queue(struct eth_device *dev) |
| 88 | { |
| 89 | struct ep93xx_priv *priv = GET_PRIV(dev); |
| 90 | int i; |
| 91 | |
| 92 | printf("\ndump_rx_descriptor_queue()\n"); |
| 93 | printf(" descriptor address word1 word2\n"); |
| 94 | for (i = 0; i < NUMRXDESC; i++) { |
| 95 | printf(" [ %p ] %08X %08X\n", |
| 96 | priv->rx_dq.base + i, |
| 97 | (priv->rx_dq.base + i)->word1, |
| 98 | (priv->rx_dq.base + i)->word2); |
| 99 | } |
| 100 | } |
| 101 | |
| 102 | /** |
| 103 | * Dump all TX descriptor queue entries to the terminal. |
| 104 | */ |
| 105 | static void dump_tx_descriptor_queue(struct eth_device *dev) |
| 106 | { |
| 107 | struct ep93xx_priv *priv = GET_PRIV(dev); |
| 108 | int i; |
| 109 | |
| 110 | printf("\ndump_tx_descriptor_queue()\n"); |
| 111 | printf(" descriptor address word1 word2\n"); |
| 112 | for (i = 0; i < NUMTXDESC; i++) { |
| 113 | printf(" [ %p ] %08X %08X\n", |
| 114 | priv->tx_dq.base + i, |
| 115 | (priv->tx_dq.base + i)->word1, |
| 116 | (priv->tx_dq.base + i)->word2); |
| 117 | } |
| 118 | } |
| 119 | |
| 120 | /** |
| 121 | * Dump all TX status queue entries to the terminal. |
| 122 | */ |
| 123 | static void dump_tx_status_queue(struct eth_device *dev) |
| 124 | { |
| 125 | struct ep93xx_priv *priv = GET_PRIV(dev); |
| 126 | int i; |
| 127 | |
| 128 | printf("\ndump_tx_status_queue()\n"); |
| 129 | printf(" descriptor address word1\n"); |
| 130 | for (i = 0; i < NUMTXDESC; i++) { |
| 131 | printf(" [ %p ] %08X\n", |
| 132 | priv->rx_sq.base + i, |
| 133 | (priv->rx_sq.base + i)->word1); |
| 134 | } |
| 135 | } |
| 136 | #else |
| 137 | #define dump_dev(x) |
| 138 | #define dump_rx_descriptor_queue(x) |
| 139 | #define dump_rx_status_queue(x) |
| 140 | #define dump_tx_descriptor_queue(x) |
| 141 | #define dump_tx_status_queue(x) |
| 142 | #endif /* defined(EP93XX_MAC_DEBUG) */ |
| 143 | |
| 144 | /** |
| 145 | * Reset the EP93xx MAC by twiddling the soft reset bit and spinning until |
| 146 | * it's cleared. |
| 147 | */ |
| 148 | static void ep93xx_mac_reset(struct eth_device *dev) |
| 149 | { |
| 150 | struct mac_regs *mac = GET_REGS(dev); |
| 151 | uint32_t value; |
| 152 | |
| 153 | debug("+ep93xx_mac_reset"); |
| 154 | |
| 155 | value = readl(&mac->selfctl); |
| 156 | value |= SELFCTL_RESET; |
| 157 | writel(value, &mac->selfctl); |
| 158 | |
| 159 | while (readl(&mac->selfctl) & SELFCTL_RESET) |
| 160 | ; /* noop */ |
| 161 | |
| 162 | debug("-ep93xx_mac_reset"); |
| 163 | } |
| 164 | |
| 165 | /* Eth device open */ |
| 166 | static int ep93xx_eth_open(struct eth_device *dev, bd_t *bd) |
| 167 | { |
| 168 | struct ep93xx_priv *priv = GET_PRIV(dev); |
| 169 | struct mac_regs *mac = GET_REGS(dev); |
| 170 | uchar *mac_addr = dev->enetaddr; |
| 171 | int i; |
| 172 | |
| 173 | debug("+ep93xx_eth_open"); |
| 174 | |
| 175 | /* Reset the MAC */ |
| 176 | ep93xx_mac_reset(dev); |
| 177 | |
| 178 | /* Reset the descriptor queues' current and end address values */ |
| 179 | priv->tx_dq.current = priv->tx_dq.base; |
| 180 | priv->tx_dq.end = (priv->tx_dq.base + NUMTXDESC); |
| 181 | |
| 182 | priv->tx_sq.current = priv->tx_sq.base; |
| 183 | priv->tx_sq.end = (priv->tx_sq.base + NUMTXDESC); |
| 184 | |
| 185 | priv->rx_dq.current = priv->rx_dq.base; |
| 186 | priv->rx_dq.end = (priv->rx_dq.base + NUMRXDESC); |
| 187 | |
| 188 | priv->rx_sq.current = priv->rx_sq.base; |
| 189 | priv->rx_sq.end = (priv->rx_sq.base + NUMRXDESC); |
| 190 | |
| 191 | /* |
| 192 | * Set the transmit descriptor and status queues' base address, |
| 193 | * current address, and length registers. Set the maximum frame |
| 194 | * length and threshold. Enable the transmit descriptor processor. |
| 195 | */ |
| 196 | writel((uint32_t)priv->tx_dq.base, &mac->txdq.badd); |
| 197 | writel((uint32_t)priv->tx_dq.base, &mac->txdq.curadd); |
| 198 | writel(sizeof(struct tx_descriptor) * NUMTXDESC, &mac->txdq.blen); |
| 199 | |
| 200 | writel((uint32_t)priv->tx_sq.base, &mac->txstsq.badd); |
| 201 | writel((uint32_t)priv->tx_sq.base, &mac->txstsq.curadd); |
| 202 | writel(sizeof(struct tx_status) * NUMTXDESC, &mac->txstsq.blen); |
| 203 | |
| 204 | writel(0x00040000, &mac->txdthrshld); |
| 205 | writel(0x00040000, &mac->txststhrshld); |
| 206 | |
| 207 | writel((TXSTARTMAX << 0) | (PKTSIZE_ALIGN << 16), &mac->maxfrmlen); |
| 208 | writel(BMCTL_TXEN, &mac->bmctl); |
| 209 | |
| 210 | /* |
| 211 | * Set the receive descriptor and status queues' base address, |
| 212 | * current address, and length registers. Enable the receive |
| 213 | * descriptor processor. |
| 214 | */ |
| 215 | writel((uint32_t)priv->rx_dq.base, &mac->rxdq.badd); |
| 216 | writel((uint32_t)priv->rx_dq.base, &mac->rxdq.curadd); |
| 217 | writel(sizeof(struct rx_descriptor) * NUMRXDESC, &mac->rxdq.blen); |
| 218 | |
| 219 | writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.badd); |
| 220 | writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.curadd); |
| 221 | writel(sizeof(struct rx_status) * NUMRXDESC, &mac->rxstsq.blen); |
| 222 | |
| 223 | writel(0x00040000, &mac->rxdthrshld); |
| 224 | |
| 225 | writel(BMCTL_RXEN, &mac->bmctl); |
| 226 | |
| 227 | writel(0x00040000, &mac->rxststhrshld); |
| 228 | |
| 229 | /* Wait until the receive descriptor processor is active */ |
| 230 | while (!(readl(&mac->bmsts) & BMSTS_RXACT)) |
| 231 | ; /* noop */ |
| 232 | |
| 233 | /* |
| 234 | * Initialize the RX descriptor queue. Clear the TX descriptor queue. |
| 235 | * Clear the RX and TX status queues. Enqueue the RX descriptor and |
| 236 | * status entries to the MAC. |
| 237 | */ |
| 238 | for (i = 0; i < NUMRXDESC; i++) { |
| 239 | /* set buffer address */ |
| 240 | (priv->rx_dq.base + i)->word1 = (uint32_t)NetRxPackets[i]; |
| 241 | |
| 242 | /* set buffer length, clear buffer index and NSOF */ |
| 243 | (priv->rx_dq.base + i)->word2 = PKTSIZE_ALIGN; |
| 244 | } |
| 245 | |
| 246 | memset(priv->tx_dq.base, 0, |
| 247 | (sizeof(struct tx_descriptor) * NUMTXDESC)); |
| 248 | memset(priv->rx_sq.base, 0, |
| 249 | (sizeof(struct rx_status) * NUMRXDESC)); |
| 250 | memset(priv->tx_sq.base, 0, |
| 251 | (sizeof(struct tx_status) * NUMTXDESC)); |
| 252 | |
| 253 | writel(NUMRXDESC, &mac->rxdqenq); |
| 254 | writel(NUMRXDESC, &mac->rxstsqenq); |
| 255 | |
| 256 | /* Set the primary MAC address */ |
| 257 | writel(AFP_IAPRIMARY, &mac->afp); |
| 258 | writel(mac_addr[0] | (mac_addr[1] << 8) | |
| 259 | (mac_addr[2] << 16) | (mac_addr[3] << 24), |
| 260 | &mac->indad); |
| 261 | writel(mac_addr[4] | (mac_addr[5] << 8), &mac->indad_upper); |
| 262 | |
| 263 | /* Turn on RX and TX */ |
| 264 | writel(RXCTL_IA0 | RXCTL_BA | RXCTL_SRXON | |
| 265 | RXCTL_RCRCA | RXCTL_MA, &mac->rxctl); |
| 266 | writel(TXCTL_STXON, &mac->txctl); |
| 267 | |
| 268 | /* Dump data structures if we're debugging */ |
| 269 | dump_dev(dev); |
| 270 | dump_rx_descriptor_queue(dev); |
| 271 | dump_rx_status_queue(dev); |
| 272 | dump_tx_descriptor_queue(dev); |
| 273 | dump_tx_status_queue(dev); |
| 274 | |
| 275 | debug("-ep93xx_eth_open"); |
| 276 | |
| 277 | return 1; |
| 278 | } |
| 279 | |
| 280 | /** |
| 281 | * Halt EP93xx MAC transmit and receive by clearing the TxCTL and RxCTL |
| 282 | * registers. |
| 283 | */ |
| 284 | static void ep93xx_eth_close(struct eth_device *dev) |
| 285 | { |
| 286 | struct mac_regs *mac = GET_REGS(dev); |
| 287 | |
| 288 | debug("+ep93xx_eth_close"); |
| 289 | |
| 290 | writel(0x00000000, &mac->rxctl); |
| 291 | writel(0x00000000, &mac->txctl); |
| 292 | |
| 293 | debug("-ep93xx_eth_close"); |
| 294 | } |
| 295 | |
| 296 | /** |
| 297 | * Copy a frame of data from the MAC into the protocol layer for further |
| 298 | * processing. |
| 299 | */ |
| 300 | static int ep93xx_eth_rcv_packet(struct eth_device *dev) |
| 301 | { |
| 302 | struct mac_regs *mac = GET_REGS(dev); |
| 303 | struct ep93xx_priv *priv = GET_PRIV(dev); |
| 304 | int len = -1; |
| 305 | |
| 306 | debug("+ep93xx_eth_rcv_packet"); |
| 307 | |
| 308 | if (RX_STATUS_RFP(priv->rx_sq.current)) { |
| 309 | if (RX_STATUS_RWE(priv->rx_sq.current)) { |
| 310 | /* |
| 311 | * We have a good frame. Extract the frame's length |
| 312 | * from the current rx_status_queue entry, and copy |
| 313 | * the frame's data into NetRxPackets[] of the |
| 314 | * protocol stack. We track the total number of |
| 315 | * bytes in the frame (nbytes_frame) which will be |
| 316 | * used when we pass the data off to the protocol |
| 317 | * layer via NetReceive(). |
| 318 | */ |
| 319 | len = RX_STATUS_FRAME_LEN(priv->rx_sq.current); |
| 320 | |
| 321 | NetReceive((uchar *)priv->rx_dq.current->word1, len); |
| 322 | |
| 323 | debug("reporting %d bytes...\n", len); |
| 324 | } else { |
| 325 | /* Do we have an erroneous packet? */ |
| 326 | error("packet rx error, status %08X %08X", |
| 327 | priv->rx_sq.current->word1, |
| 328 | priv->rx_sq.current->word2); |
| 329 | dump_rx_descriptor_queue(dev); |
| 330 | dump_rx_status_queue(dev); |
| 331 | } |
| 332 | |
| 333 | /* |
| 334 | * Clear the associated status queue entry, and |
| 335 | * increment our current pointers to the next RX |
| 336 | * descriptor and status queue entries (making sure |
| 337 | * we wrap properly). |
| 338 | */ |
| 339 | memset((void *)priv->rx_sq.current, 0, |
| 340 | sizeof(struct rx_status)); |
| 341 | |
| 342 | priv->rx_sq.current++; |
| 343 | if (priv->rx_sq.current >= priv->rx_sq.end) |
| 344 | priv->rx_sq.current = priv->rx_sq.base; |
| 345 | |
| 346 | priv->rx_dq.current++; |
| 347 | if (priv->rx_dq.current >= priv->rx_dq.end) |
| 348 | priv->rx_dq.current = priv->rx_dq.base; |
| 349 | |
| 350 | /* |
| 351 | * Finally, return the RX descriptor and status entries |
| 352 | * back to the MAC engine, and loop again, checking for |
| 353 | * more descriptors to process. |
| 354 | */ |
| 355 | writel(1, &mac->rxdqenq); |
| 356 | writel(1, &mac->rxstsqenq); |
| 357 | } else { |
| 358 | len = 0; |
| 359 | } |
| 360 | |
| 361 | debug("-ep93xx_eth_rcv_packet %d", len); |
| 362 | return len; |
| 363 | } |
| 364 | |
| 365 | /** |
| 366 | * Send a block of data via ethernet. |
| 367 | */ |
| 368 | static int ep93xx_eth_send_packet(struct eth_device *dev, |
Joe Hershberger | e4e0488 | 2012-05-22 18:36:19 +0000 | [diff] [blame] | 369 | void * const packet, int const length) |
Matthias Kaehlcke | 3b8d1a4 | 2010-01-31 17:39:49 +0100 | [diff] [blame] | 370 | { |
| 371 | struct mac_regs *mac = GET_REGS(dev); |
| 372 | struct ep93xx_priv *priv = GET_PRIV(dev); |
| 373 | int ret = -1; |
| 374 | |
| 375 | debug("+ep93xx_eth_send_packet"); |
| 376 | |
| 377 | /* Parameter check */ |
| 378 | BUG_ON(packet == NULL); |
| 379 | |
| 380 | /* |
| 381 | * Initialize the TX descriptor queue with the new packet's info. |
| 382 | * Clear the associated status queue entry. Enqueue the packet |
| 383 | * to the MAC for transmission. |
| 384 | */ |
| 385 | |
| 386 | /* set buffer address */ |
| 387 | priv->tx_dq.current->word1 = (uint32_t)packet; |
| 388 | |
| 389 | /* set buffer length and EOF bit */ |
| 390 | priv->tx_dq.current->word2 = length | TX_DESC_EOF; |
| 391 | |
| 392 | /* clear tx status */ |
| 393 | priv->tx_sq.current->word1 = 0; |
| 394 | |
| 395 | /* enqueue the TX descriptor */ |
| 396 | writel(1, &mac->txdqenq); |
| 397 | |
| 398 | /* wait for the frame to become processed */ |
| 399 | while (!TX_STATUS_TXFP(priv->tx_sq.current)) |
| 400 | ; /* noop */ |
| 401 | |
| 402 | if (!TX_STATUS_TXWE(priv->tx_sq.current)) { |
| 403 | error("packet tx error, status %08X", |
| 404 | priv->tx_sq.current->word1); |
| 405 | dump_tx_descriptor_queue(dev); |
| 406 | dump_tx_status_queue(dev); |
| 407 | |
| 408 | /* TODO: Add better error handling? */ |
| 409 | goto eth_send_out; |
| 410 | } |
| 411 | |
| 412 | ret = 0; |
| 413 | /* Fall through */ |
| 414 | |
| 415 | eth_send_out: |
| 416 | debug("-ep93xx_eth_send_packet %d", ret); |
| 417 | return ret; |
| 418 | } |
| 419 | |
| 420 | #if defined(CONFIG_MII) |
| 421 | int ep93xx_miiphy_initialize(bd_t * const bd) |
| 422 | { |
| 423 | miiphy_register("ep93xx_eth0", ep93xx_miiphy_read, ep93xx_miiphy_write); |
| 424 | return 0; |
| 425 | } |
| 426 | #endif |
| 427 | |
| 428 | /** |
| 429 | * Initialize the EP93xx MAC. The MAC hardware is reset. Buffers are |
| 430 | * allocated, if necessary, for the TX and RX descriptor and status queues, |
| 431 | * as well as for received packets. The EP93XX MAC hardware is initialized. |
| 432 | * Transmit and receive operations are enabled. |
| 433 | */ |
| 434 | int ep93xx_eth_initialize(u8 dev_num, int base_addr) |
| 435 | { |
| 436 | int ret = -1; |
| 437 | struct eth_device *dev; |
| 438 | struct ep93xx_priv *priv; |
| 439 | |
| 440 | debug("+ep93xx_eth_initialize"); |
| 441 | |
| 442 | priv = malloc(sizeof(*priv)); |
| 443 | if (!priv) { |
| 444 | error("malloc() failed"); |
| 445 | goto eth_init_failed_0; |
| 446 | } |
| 447 | memset(priv, 0, sizeof(*priv)); |
| 448 | |
| 449 | priv->regs = (struct mac_regs *)base_addr; |
| 450 | |
| 451 | priv->tx_dq.base = calloc(NUMTXDESC, |
| 452 | sizeof(struct tx_descriptor)); |
| 453 | if (priv->tx_dq.base == NULL) { |
| 454 | error("calloc() failed"); |
| 455 | goto eth_init_failed_1; |
| 456 | } |
| 457 | |
| 458 | priv->tx_sq.base = calloc(NUMTXDESC, |
| 459 | sizeof(struct tx_status)); |
| 460 | if (priv->tx_sq.base == NULL) { |
| 461 | error("calloc() failed"); |
| 462 | goto eth_init_failed_2; |
| 463 | } |
| 464 | |
| 465 | priv->rx_dq.base = calloc(NUMRXDESC, |
| 466 | sizeof(struct rx_descriptor)); |
| 467 | if (priv->rx_dq.base == NULL) { |
| 468 | error("calloc() failed"); |
| 469 | goto eth_init_failed_3; |
| 470 | } |
| 471 | |
| 472 | priv->rx_sq.base = calloc(NUMRXDESC, |
| 473 | sizeof(struct rx_status)); |
| 474 | if (priv->rx_sq.base == NULL) { |
| 475 | error("calloc() failed"); |
| 476 | goto eth_init_failed_4; |
| 477 | } |
| 478 | |
| 479 | dev = malloc(sizeof *dev); |
| 480 | if (dev == NULL) { |
| 481 | error("malloc() failed"); |
| 482 | goto eth_init_failed_5; |
| 483 | } |
| 484 | memset(dev, 0, sizeof *dev); |
| 485 | |
| 486 | dev->iobase = base_addr; |
| 487 | dev->priv = priv; |
| 488 | dev->init = ep93xx_eth_open; |
| 489 | dev->halt = ep93xx_eth_close; |
| 490 | dev->send = ep93xx_eth_send_packet; |
| 491 | dev->recv = ep93xx_eth_rcv_packet; |
| 492 | |
| 493 | sprintf(dev->name, "ep93xx_eth-%hu", dev_num); |
| 494 | |
| 495 | eth_register(dev); |
| 496 | |
| 497 | /* Done! */ |
| 498 | ret = 1; |
| 499 | goto eth_init_done; |
| 500 | |
| 501 | eth_init_failed_5: |
| 502 | free(priv->rx_sq.base); |
| 503 | /* Fall through */ |
| 504 | |
| 505 | eth_init_failed_4: |
| 506 | free(priv->rx_dq.base); |
| 507 | /* Fall through */ |
| 508 | |
| 509 | eth_init_failed_3: |
| 510 | free(priv->tx_sq.base); |
| 511 | /* Fall through */ |
| 512 | |
| 513 | eth_init_failed_2: |
| 514 | free(priv->tx_dq.base); |
| 515 | /* Fall through */ |
| 516 | |
| 517 | eth_init_failed_1: |
| 518 | free(priv); |
| 519 | /* Fall through */ |
| 520 | |
| 521 | eth_init_failed_0: |
| 522 | /* Fall through */ |
| 523 | |
| 524 | eth_init_done: |
| 525 | debug("-ep93xx_eth_initialize %d", ret); |
| 526 | return ret; |
| 527 | } |
| 528 | |
| 529 | #if defined(CONFIG_MII) |
| 530 | |
| 531 | /** |
| 532 | * Maximum MII address we support |
| 533 | */ |
| 534 | #define MII_ADDRESS_MAX 31 |
| 535 | |
| 536 | /** |
| 537 | * Maximum MII register address we support |
| 538 | */ |
| 539 | #define MII_REGISTER_MAX 31 |
| 540 | |
| 541 | /** |
| 542 | * Read a 16-bit value from an MII register. |
| 543 | */ |
Mike Frysinger | 5ff5fdb | 2010-07-27 18:35:08 -0400 | [diff] [blame] | 544 | static int ep93xx_miiphy_read(const char * const dev, unsigned char const addr, |
Matthias Kaehlcke | 3b8d1a4 | 2010-01-31 17:39:49 +0100 | [diff] [blame] | 545 | unsigned char const reg, unsigned short * const value) |
| 546 | { |
| 547 | struct mac_regs *mac = (struct mac_regs *)MAC_BASE; |
| 548 | int ret = -1; |
| 549 | uint32_t self_ctl; |
| 550 | |
| 551 | debug("+ep93xx_miiphy_read"); |
| 552 | |
| 553 | /* Parameter checks */ |
| 554 | BUG_ON(dev == NULL); |
| 555 | BUG_ON(addr > MII_ADDRESS_MAX); |
| 556 | BUG_ON(reg > MII_REGISTER_MAX); |
| 557 | BUG_ON(value == NULL); |
| 558 | |
| 559 | /* |
| 560 | * Save the current SelfCTL register value. Set MAC to suppress |
| 561 | * preamble bits. Wait for any previous MII command to complete |
| 562 | * before issuing the new command. |
| 563 | */ |
| 564 | self_ctl = readl(&mac->selfctl); |
| 565 | #if defined(CONFIG_MII_SUPPRESS_PREAMBLE) |
| 566 | writel(self_ctl & ~(1 << 8), &mac->selfctl); |
| 567 | #endif /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */ |
| 568 | |
| 569 | while (readl(&mac->miists) & MIISTS_BUSY) |
| 570 | ; /* noop */ |
| 571 | |
| 572 | /* |
| 573 | * Issue the MII 'read' command. Wait for the command to complete. |
| 574 | * Read the MII data value. |
| 575 | */ |
| 576 | writel(MIICMD_OPCODE_READ | ((uint32_t)addr << 5) | (uint32_t)reg, |
| 577 | &mac->miicmd); |
| 578 | while (readl(&mac->miists) & MIISTS_BUSY) |
| 579 | ; /* noop */ |
| 580 | |
| 581 | *value = (unsigned short)readl(&mac->miidata); |
| 582 | |
| 583 | /* Restore the saved SelfCTL value and return. */ |
| 584 | writel(self_ctl, &mac->selfctl); |
| 585 | |
| 586 | ret = 0; |
| 587 | /* Fall through */ |
| 588 | |
| 589 | debug("-ep93xx_miiphy_read"); |
| 590 | return ret; |
| 591 | } |
| 592 | |
| 593 | /** |
| 594 | * Write a 16-bit value to an MII register. |
| 595 | */ |
Mike Frysinger | 5ff5fdb | 2010-07-27 18:35:08 -0400 | [diff] [blame] | 596 | static int ep93xx_miiphy_write(const char * const dev, unsigned char const addr, |
Matthias Kaehlcke | 3b8d1a4 | 2010-01-31 17:39:49 +0100 | [diff] [blame] | 597 | unsigned char const reg, unsigned short const value) |
| 598 | { |
| 599 | struct mac_regs *mac = (struct mac_regs *)MAC_BASE; |
| 600 | int ret = -1; |
| 601 | uint32_t self_ctl; |
| 602 | |
| 603 | debug("+ep93xx_miiphy_write"); |
| 604 | |
| 605 | /* Parameter checks */ |
| 606 | BUG_ON(dev == NULL); |
| 607 | BUG_ON(addr > MII_ADDRESS_MAX); |
| 608 | BUG_ON(reg > MII_REGISTER_MAX); |
| 609 | |
| 610 | /* |
| 611 | * Save the current SelfCTL register value. Set MAC to suppress |
| 612 | * preamble bits. Wait for any previous MII command to complete |
| 613 | * before issuing the new command. |
| 614 | */ |
| 615 | self_ctl = readl(&mac->selfctl); |
| 616 | #if defined(CONFIG_MII_SUPPRESS_PREAMBLE) |
| 617 | writel(self_ctl & ~(1 << 8), &mac->selfctl); |
| 618 | #endif /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */ |
| 619 | |
| 620 | while (readl(&mac->miists) & MIISTS_BUSY) |
| 621 | ; /* noop */ |
| 622 | |
| 623 | /* Issue the MII 'write' command. Wait for the command to complete. */ |
| 624 | writel((uint32_t)value, &mac->miidata); |
| 625 | writel(MIICMD_OPCODE_WRITE | ((uint32_t)addr << 5) | (uint32_t)reg, |
| 626 | &mac->miicmd); |
| 627 | while (readl(&mac->miists) & MIISTS_BUSY) |
| 628 | ; /* noop */ |
| 629 | |
| 630 | /* Restore the saved SelfCTL value and return. */ |
| 631 | writel(self_ctl, &mac->selfctl); |
| 632 | |
| 633 | ret = 0; |
| 634 | /* Fall through */ |
| 635 | |
| 636 | debug("-ep93xx_miiphy_write"); |
| 637 | return ret; |
| 638 | } |
| 639 | #endif /* defined(CONFIG_MII) */ |