Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / d79de1d950d4779583a97be8eaab135d2bca3565 / . / board / friendlyarm / mini2440 / mini2440.c
blob: 59ed0548e75375b68234dd65ad6e2994528149fa [file] [log] [blame]
Gabriel Huauc4824ff2012-05-02 10:48:37 +0000[diff] [blame]1/*
2 * (C) Copyright 2002
3 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
4 * Marius Groeger <mgroeger@sysgo.de>
5 *
6 * (C) Copyright 2002
7 * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
8 *
9 * (C) Copyright 2009
10 * Michel Pollet <buserror@gmail.com>
11 *
12 * (C) Copyright 2012
13 * Gabriel Huau <contact@huau-gabriel.fr>
14 *
Wolfgang Denkd79de1d2013-07-08 09:37:19 +0200[diff] [blame^]15 * SPDX-License-Identifier: GPL-2.0+
Gabriel Huauc4824ff2012-05-02 10:48:37 +0000[diff] [blame]16 */
17
18#include <common.h>
19#include <asm/arch/s3c2440.h>
20#include <asm/arch/iomux.h>
21#include <asm/arch/gpio.h>
22#include <asm/io.h>
23#include <asm/gpio.h>
24#include <netdev.h>
25#include "mini2440.h"
26
27DECLARE_GLOBAL_DATA_PTR;
28
29static inline void pll_delay(unsigned long loops)
30{
31 __asm__ volatile ("1:\n"
32 "subs %0, %1, #1\n"
33 "bne 1b" : "=r" (loops) : "0" (loops));
34}
35
36int board_early_init_f(void)
37{
38 struct s3c24x0_clock_power * const clk_power =
39 s3c24x0_get_base_clock_power();
40
41 /* to reduce PLL lock time, adjust the LOCKTIME register */
42 clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */
43 clk_power->clkdivn = CLKDIVN_VAL;
44
45 /* configure UPLL */
46 clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
47 /* some delay between MPLL and UPLL */
48 pll_delay(100);
49
50 /* configure MPLL */
51 clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
52
53 /* some delay between MPLL and UPLL */
54 pll_delay(10000);
55
56 return 0;
57}
58
59/*
60 * Miscellaneous platform dependent initialisations
61 */
62int board_init(void)
63{
64 struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
65
66 /* IOMUX Port H : UART Configuration */
67 gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 |
68 IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2;
69
70 gpio_direction_output(GPH8, 0);
71 gpio_direction_output(GPH9, 0);
72 gpio_direction_output(GPH10, 0);
73
74 /* adress of boot parameters */
75 gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR;
76
77 return 0;
78}
79
80int dram_init(void)
81{
82 struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl();
83
84 /*
85 * Configuring bus width and timing
86 * Initialize clocks for each bank 0..5
87 * Bank 3 and 4 are used for DM9000
88 */
89 writel(BANK_CONF, &memctl->bwscon);
90 writel(B0_CONF, &memctl->bankcon[0]);
91 writel(B1_CONF, &memctl->bankcon[1]);
92 writel(B2_CONF, &memctl->bankcon[2]);
93 writel(B3_CONF, &memctl->bankcon[3]);
94 writel(B4_CONF, &memctl->bankcon[4]);
95 writel(B5_CONF, &memctl->bankcon[5]);
96
97 /* Bank 6 and 7 are used for DRAM */
98 writel(SDRAM_64MB, &memctl->bankcon[6]);
99 writel(SDRAM_64MB, &memctl->bankcon[7]);
100
101 writel(MEM_TIMING, &memctl->refresh);
102 writel(BANKSIZE_CONF, &memctl->banksize);
103 writel(B6_MRSR, &memctl->mrsrb6);
104 writel(B7_MRSR, &memctl->mrsrb7);
105
106 gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
107 PHYS_SDRAM_SIZE);
108 return 0;
109}
110
111int board_eth_init(bd_t *bis)
112{
113#ifdef CONFIG_DRIVER_DM9000
114 return dm9000_initialize(bis);
115#else
116 return 0;
117#endif
118}