blob: 8a60b5850f202768afb0e25832ea3e251c63a5dd [file] [log] [blame]
Wolfgang Denk62f1ef52006-03-12 23:17:31 +01001/*
2 * Copyright (C) 2005 Arabella Software Ltd.
3 * Yuli Barcohen <yuli@arabellasw.com>
4 *
5 * Support for Embedded Planet EP88x boards.
6 * Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash.
7 *
Wolfgang Denkd79de1d2013-07-08 09:37:19 +02008 * SPDX-License-Identifier: GPL-2.0+
Wolfgang Denk62f1ef52006-03-12 23:17:31 +01009 */
10
11#include <common.h>
12#include <mpc8xx.h>
13
14/*
15 * SDRAM uses two Micron chips.
16 * Minimal CPU frequency is 40MHz.
17 */
18static uint sdram_table[] = {
19 /* Single read (offset 0x00 in UPM RAM) */
20 0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x01B98404,
21 0x1FF74C00, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
22
23 /* Burst read (offset 0x08 in UPM RAM) */
24 0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x00BDC404,
25 0x00FFCC00, 0x00FFCC00, 0x01FB8C00, 0x1FF74C00,
26 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
27 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
28
29 /* Single write (offset 0x18 in UPM RAM) */
30 0xEFCBCC04, 0x0F37C804, 0x0EEE8002, 0x01B90404,
31 0x1FF74C05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
32
33 /* Burst write (offset 0x20 in UPM RAM) */
34 0xEFCBCC04, 0x0F37C804, 0x0EEE8000, 0x00BD4400,
35 0x00FFCC00, 0x00FFCC02, 0x01FB8C04, 0x1FF74C05,
36 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
37 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
38
39 /* Refresh (offset 0x30 in UPM RAM) */
40 0xEFFACC04, 0x0FF5CC04, 0x0FFFCC04, 0x1FFFCC04,
41 0xFFFFCC05, 0xFFFFCC05, 0xEFFB8C34, 0x0FF74C34,
42 0x0FFACCB4, 0x0FF5CC34, 0x0FFFC034, 0x0FFFC0B4,
43
44 /* Exception (offset 0x3C in UPM RAM) */
45 0x0FEA8034, 0x1FB54034, 0xFFFFCC34, 0xFFFFCC05
46};
47
48int board_early_init_f (void)
49{
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +020050 vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
Wolfgang Denk62f1ef52006-03-12 23:17:31 +010051
52 bcsr[0] |= 0x0C; /* Turn the LEDs off */
53 bcsr[2] |= 0x08; /* Enable flash WE# line - necessary for
54 flash detection by CFI driver
55 */
56
57#if defined(CONFIG_8xx_CONS_SMC1)
58 bcsr[6] |= 0x10; /* Enables RS-232 transceiver */
59#endif
60#if defined(CONFIG_8xx_CONS_SCC2)
61 bcsr[7] |= 0x10; /* Enables RS-232 transceiver */
62#endif
63#ifdef CONFIG_ETHER_ON_FEC1
64 bcsr[8] |= 0xC0; /* Enable Ethernet 1 PHY */
65#endif
66#ifdef CONFIG_ETHER_ON_FEC2
67 bcsr[8] |= 0x30; /* Enable Ethernet 2 PHY */
68#endif
69
70 return 0;
71}
72
Becky Brucebd99ae72008-06-09 16:03:40 -050073phys_size_t initdram (int board_type)
Wolfgang Denk62f1ef52006-03-12 23:17:31 +010074{
75 long int msize;
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +020076 volatile immap_t *immap = (volatile immap_t *)CONFIG_SYS_IMMR;
Wolfgang Denk62f1ef52006-03-12 23:17:31 +010077 volatile memctl8xx_t *memctl = &immap->im_memctl;
78
79 upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
80
81 /* Configure SDRAM refresh */
82 memctl->memc_mptpr = MPTPR_PTP_DIV2; /* BRGCLK/2 */
83
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +020084 memctl->memc_mamr = (65 << 24) | CONFIG_SYS_MAMR; /* No refresh */
Wolfgang Denk62f1ef52006-03-12 23:17:31 +010085 udelay(100);
86
87 /* Run MRS pattern from location 0x36 */
88 memctl->memc_mar = 0x88;
89 memctl->memc_mcr = 0x80002236;
90 udelay(100);
91
92 memctl->memc_mamr |= MAMR_PTAE; /* Enable refresh */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +020093 memctl->memc_or1 = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
94 memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
Wolfgang Denk62f1ef52006-03-12 23:17:31 +010095
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +020096 msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE);
Wolfgang Denk62f1ef52006-03-12 23:17:31 +010097 memctl->memc_or1 |= ~(msize - 1);
98
99 return msize;
100}
101
102int checkboard( void )
103{
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200104 vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
Wolfgang Denk62f1ef52006-03-12 23:17:31 +0100105
106 puts("Board: ");
107 switch (bcsr[15]) {
108 case 0xE7:
109 puts("EP88xC 1.0");
110 break;
111 default:
112 printf("unknown ID=%02X", bcsr[15]);
113 }
114 printf(" CPLD revision %d\n", bcsr[14]);
115
116 return 0;
117}