| Joe Hamman | 1bab0b0 | 2007-08-09 15:11:03 -0500 | [diff] [blame] | 1 | Wind River SBC8641D reference board |
| 2 | =========================== |
| 3 | |
| 4 | Created 06/14/2007 Joe Hamman |
| 5 | Copyright 2007, Embedded Specialties, Inc. |
| 6 | Copyright 2007 Wind River Systemes, Inc. |
| 7 | ----------------------------- |
| 8 | |
| 9 | 1. Building U-Boot |
| 10 | ------------------ |
| 11 | The SBC8641D code is known to build using ELDK 4.1. |
| 12 | |
| 13 | $ make sbc8641d_config |
| 14 | Configuring for sbc8641d board... |
| 15 | |
| 16 | $ make |
| 17 | |
| 18 | |
| 19 | 2. Switch and Jumper Settings |
| 20 | ----------------------------- |
| 21 | All Jumpers & Switches are in their default positions. Please refer to |
| 22 | the board documentation for details. Some settings control CPU voltages |
| 23 | and settings may change with board revisions. |
| 24 | |
| 25 | 3. Known limitations |
| 26 | -------------------- |
| 27 | PCI: |
| 28 | The PCI command may hang if no boards are present in either slot. |