| Lokesh Vutla | 58a3c1b | 2017-12-29 11:47:57 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/gpio/gpio.h> |
| 7 | #include <dt-bindings/interrupt-controller/irq.h> |
| 8 | #include "am57xx-idk-common.dtsi" |
| 9 | |
| 10 | / { |
| 11 | memory@0 { |
| 12 | device_type = "memory"; |
| 13 | reg = <0x0 0x80000000 0x0 0x80000000>; |
| 14 | }; |
| 15 | |
| 16 | status-leds { |
| 17 | compatible = "gpio-leds"; |
| 18 | cpu0-led { |
| 19 | label = "status0:red:cpu0"; |
| 20 | gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; |
| 21 | default-state = "off"; |
| 22 | linux,default-trigger = "cpu0"; |
| 23 | }; |
| 24 | |
| 25 | usr0-led { |
| 26 | label = "status0:green:usr"; |
| 27 | gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; |
| 28 | default-state = "off"; |
| 29 | }; |
| 30 | |
| 31 | heartbeat-led { |
| 32 | label = "status0:blue:heartbeat"; |
| 33 | gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; |
| 34 | default-state = "off"; |
| 35 | linux,default-trigger = "heartbeat"; |
| 36 | }; |
| 37 | |
| 38 | cpu1-led { |
| 39 | label = "status1:red:cpu1"; |
| 40 | gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; |
| 41 | default-state = "off"; |
| 42 | linux,default-trigger = "cpu1"; |
| 43 | }; |
| 44 | |
| 45 | usr1-led { |
| 46 | label = "status1:green:usr"; |
| 47 | gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>; |
| 48 | default-state = "off"; |
| 49 | }; |
| 50 | |
| 51 | mmc0-led { |
| 52 | label = "status1:blue:mmc0"; |
| 53 | gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; |
| 54 | default-state = "off"; |
| 55 | linux,default-trigger = "mmc0"; |
| 56 | }; |
| 57 | }; |
| 58 | }; |
| 59 | |
| 60 | &omap_dwc3_2 { |
| 61 | extcon = <&extcon_usb2>; |
| 62 | }; |
| 63 | |
| 64 | &extcon_usb2 { |
| 65 | id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; |
| 66 | vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; |
| 67 | }; |
| 68 | |
| 69 | &sn65hvs882 { |
| 70 | load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; |
| 71 | }; |
| 72 | |
| 73 | &pcie1_rc { |
| 74 | status = "okay"; |
| 75 | gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| 76 | }; |
| 77 | |
| 78 | &pcie1_ep { |
| 79 | gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| 80 | }; |
| 81 | |
| 82 | &mailbox5 { |
| 83 | status = "okay"; |
| 84 | mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { |
| 85 | status = "okay"; |
| 86 | }; |
| 87 | mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { |
| 88 | status = "okay"; |
| 89 | }; |
| 90 | }; |
| 91 | |
| 92 | &mailbox6 { |
| 93 | status = "okay"; |
| 94 | mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { |
| 95 | status = "okay"; |
| 96 | }; |
| 97 | mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { |
| 98 | status = "okay"; |
| 99 | }; |
| 100 | }; |