Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / d2fbd38f5efcd61e8a7ac2de5280e875951cbc6d / . / dts / upstream / src / arm / nxp / imx / imx53-m53menlo.dts
blob: 558751e730f3e96fcff1d3e76d8225435462d362 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (C) 2019 Marek Vasut <marex@denx.de>
4 */
5
6/dts-v1/;
7#include "imx53-m53.dtsi"
8
9/ {
10 model = "MENLO M53 EMBEDDED DEVICE";
11 compatible = "menlo,m53menlo", "fsl,imx53";
12
13 gpio-keys {
14 compatible = "gpio-keys";
15 pinctrl-0 = <&pinctrl_power_button>;
16 pinctrl-names = "default";
17
18 power-button {
19 label = "Power button";
20 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
21 linux,code = <KEY_POWER>;
22 };
23 };
24
25 gpio-poweroff {
26 compatible = "gpio-poweroff";
27 pinctrl-0 = <&pinctrl_power_out>;
28 pinctrl-names = "default";
29 gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
30 };
31
32 leds {
33 compatible = "gpio-leds";
34 pinctrl-names = "default";
35 pinctrl-0 = <&pinctrl_led>;
36
37 led-user1 {
38 label = "TestLed601";
39 gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
40 linux,default-trigger = "mmc0";
41 };
42
43 led-user2 {
44 label = "TestLed602";
45 gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
46 linux,default-trigger = "heartbeat";
47 };
48
49 led-eth {
50 label = "EthLedYe";
51 gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
52 linux,default-trigger = "netdev";
53 };
54 };
55
56 lvds-decoder {
57 compatible = "ti,ds90cf364a", "lvds-decoder";
58
59 ports {
60 #address-cells = <1>;
61 #size-cells = <0>;
62
63 port@0 {
64 reg = <0>;
65
66 lvds_decoder_in: endpoint {
Tom Rini6b642ac2024-10-01 12:20:28 -0600[diff] [blame]67 data-mapping = "jeida-18";
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]68 remote-endpoint = <&lvds0_out>;
69 };
70 };
71
72 port@1 {
73 reg = <1>;
74
75 lvds_decoder_out: endpoint {
76 remote-endpoint = <&panel_in>;
77 };
78 };
79 };
80 };
81
82 panel {
83 compatible = "edt,etm0700g0dh6";
84 pinctrl-0 = <&pinctrl_display_gpio>;
85 pinctrl-names = "default";
86 enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
87
88 port {
89 panel_in: endpoint {
90 remote-endpoint = <&lvds_decoder_out>;
91 };
92 };
93 };
94
95 beeper {
96 compatible = "gpio-beeper";
97 pinctrl-0 = <&pinctrl_beeper>;
98 gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
99 };
100
101 reg_usbh1_vbus: regulator-usbh1-vbus {
102 compatible = "regulator-fixed";
103 regulator-name = "vbus";
104 regulator-min-microvolt = <5000000>;
105 regulator-max-microvolt = <5000000>;
106 gpio = <&gpio1 2 0>;
107 };
108};
109
110&can1 {
111 pinctrl-names = "default";
112 pinctrl-0 = <&pinctrl_can1>;
113 status = "okay";
114};
115
116&can2 {
117 pinctrl-names = "default";
118 pinctrl-0 = <&pinctrl_can2>;
119 status = "okay";
120};
121
122&clks {
123 assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
124 <&clks IMX5_CLK_CKO1_PODF>,
125 <&clks IMX5_CLK_CKO1>;
126 assigned-clock-parents = <&clks IMX5_CLK_AHB>;
127 assigned-clock-rates = <133333334>, <33333334>, <33333334>;
128};
129
130&ecspi2 {
131 pinctrl-names = "default";
132 pinctrl-0 = <&pinctrl_ecspi2>;
133 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
134 status = "okay";
135
136 spidev@0 {
137 compatible = "menlo,m53cpld";
138 spi-max-frequency = <25000000>;
139 reg = <0>;
140 };
141
142 spidev@1 {
143 compatible = "menlo,m53cpld";
144 spi-max-frequency = <25000000>;
145 reg = <1>;
146 };
147};
148
149&esdhc1 {
150 pinctrl-names = "default";
151 pinctrl-0 = <&pinctrl_esdhc1>;
152 cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
153 wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
154 status = "okay";
155};
156
157&fec {
158 pinctrl-names = "default";
159 pinctrl-0 = <&pinctrl_fec>;
160 phy-mode = "rmii";
161 phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
162 status = "okay";
163};
164
165&gpio1 {
166 gpio-line-names =
167 "", "", "", "",
168 "", "", "", "",
169 "", "", "", "",
170 "", "", "", "",
171 "", "", "", "",
172 "", "", "", "",
173 "", "", "", "",
174 "", "", "", "";
175};
176
177&gpio2 {
178 gpio-line-names =
179 "", "", "", "",
180 "", "", "", "",
181 "TestPin_SV2_3", "", "", "",
182 "", "", "", "",
183 "", "", "", "",
184 "", "", "", "",
185 "", "", "", "",
186 "", "", "", "";
187};
188
189&gpio3 {
190 gpio-line-names =
191 "", "", "", "",
192 "", "", "", "",
193 "", "", "", "",
194 "", "", "", "",
195 "", "", "", "",
196 "", "", "", "",
197 "CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
198 "", "CPLD_JTAG_TDO", "", "";
199};
200
201&gpio5 {
202 gpio-line-names =
203 "", "", "", "",
204 "", "", "", "",
205 "", "", "", "",
206 "", "", "", "",
207 "", "", "CPLD_JTAG_TCK", "KBD_intK",
208 "CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
209 "CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
210 "CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
211};
212
213&gpio6 {
214 gpio-line-names =
215 "", "", "", "",
216 "CPLD_reset", "", "", "",
217 "", "", "", "",
218 "", "", "", "",
219 "", "", "", "",
220 "", "", "", "",
221 "", "", "", "",
222 "", "", "", "";
223};
224
225&gpio7 {
226 gpio-line-names =
227 "", "", "", "",
228 "", "", "", "",
229 "", "", "", "",
230 "", "USB-OTG_OverCurrent", "", "",
231 "", "", "", "",
232 "", "", "", "",
233 "", "", "", "",
234 "", "", "", "";
235};
236
237&i2c1 {
238 pinctrl-names = "default";
239 pinctrl-0 = <&pinctrl_i2c1>;
240 status = "okay";
241
242 touchscreen@38 {
243 compatible = "edt,edt-ft5x06";
244 reg = <0x38>;
245 pinctrl-names = "default";
246 pinctrl-0 = <&pinctrl_edt_ft5x06>;
247 interrupt-parent = <&gpio6>;
248 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
249 reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
250 wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
251 };
252
253 eeprom@50 {
254 compatible = "atmel,24c64";
255 reg = <0x50>;
256 pagesize = <32>;
257 };
258
259 dac@60 {
260 compatible = "microchip,mcp4725";
261 reg = <0x60>;
262 };
263};
264
265&i2c2 {
266 touchscreen@41 {
267 status = "disabled";
268 };
269};
270
271&i2c3 {
272 pinctrl-names = "default";
273 pinctrl-0 = <&pinctrl_i2c3>;
274 status = "okay";
275};
276
277&iomuxc {
278 pinctrl-names = "default";
279 pinctrl-0 = <&pinctrl_hog>;
280
281 imx53-m53evk {
282 hoggrp {
283 fsl,pins = <
284 MX53_PAD_GPIO_19__CCM_CLKO 0x1e4
285 MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1e4
286 MX53_PAD_CSI0_DAT4__GPIO5_22 0x1e4
287 MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4
288 MX53_PAD_CSI0_DAT6__GPIO5_24 0x1e4
289 MX53_PAD_CSI0_DAT7__GPIO5_25 0x1e4
290 MX53_PAD_CSI0_DAT8__GPIO5_26 0x1e4
291 MX53_PAD_CSI0_DAT9__GPIO5_27 0x1c4
292 MX53_PAD_CSI0_DAT10__GPIO5_28 0x1e4
293 MX53_PAD_CSI0_DAT11__GPIO5_29 0x1e4
294 MX53_PAD_PATA_DATA11__GPIO2_11 0x1e4
295 MX53_PAD_EIM_D24__GPIO3_24 0x1e4
296 MX53_PAD_EIM_D25__GPIO3_25 0x1e4
297 MX53_PAD_EIM_D29__GPIO3_29 0x1e4
298 MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1e4
299 MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1e4
300 MX53_PAD_CSI0_DAT18__GPIO6_4 0x1c4
301 MX53_PAD_PATA_DATA8__GPIO2_8 0x1e4
302 >;
303 };
304
305 pinctrl_led: ledgrp {
306 fsl,pins = <
307 MX53_PAD_CSI0_DAT15__GPIO6_1 0x1c4
308 MX53_PAD_CSI0_DAT16__GPIO6_2 0x1c4
309 >;
310 };
311
312 pinctrl_beeper: beepergrp {
313 fsl,pins = <
314 MX53_PAD_CSI0_DAT17__GPIO6_3 0x1c4
315 >;
316 };
317
318 pinctrl_can1: can1grp {
319 fsl,pins = <
320 MX53_PAD_GPIO_7__CAN1_TXCAN 0x1c4
321 MX53_PAD_GPIO_8__CAN1_RXCAN 0x1c4
322 >;
323 };
324
325 pinctrl_can2: can2grp {
326 fsl,pins = <
327 MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1e4
328 MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4
329 >;
330 };
331
332 pinctrl_display_gpio: display-gpiogrp {
333 fsl,pins = <
334 MX53_PAD_CSI0_DAT12__GPIO5_30 0x1c4 /* Reset */
335 MX53_PAD_CSI0_MCLK__GPIO5_19 0x1e4 /* Int-K */
336 MX53_PAD_CSI0_DAT13__GPIO5_31 0x1c4 /* Int-I */
337
338 MX53_PAD_CSI0_DAT14__GPIO6_0 0x1c4 /* Power down */
339 >;
340 };
341
342 pinctrl_edt_ft5x06: edt-ft5x06grp {
343 fsl,pins = <
344 MX53_PAD_PATA_DATA9__GPIO2_9 0x1e4 /* Reset */
345 MX53_PAD_CSI0_DAT19__GPIO6_5 0x1c4 /* Interrupt */
346 MX53_PAD_PATA_DATA10__GPIO2_10 0x1e4 /* Wake */
347 >;
348 };
349
350 pinctrl_ecspi2: ecspi2grp {
351 fsl,pins = <
352 MX53_PAD_EIM_CS0__ECSPI2_SCLK 0xe4
353 MX53_PAD_EIM_OE__ECSPI2_MISO 0xe4
354 MX53_PAD_EIM_CS1__ECSPI2_MOSI 0xe4
355 MX53_PAD_EIM_RW__GPIO2_26 0xe4
356 MX53_PAD_EIM_LBA__GPIO2_27 0xe4
357 >;
358 };
359
360 pinctrl_esdhc1: esdhc1grp {
361 fsl,pins = <
362 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1e4
363 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1e4
364 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1e4
365 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1e4
366 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1e4
367 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1e4
368 MX53_PAD_GPIO_1__GPIO1_1 0x1c4
369 MX53_PAD_GPIO_9__GPIO1_9 0x1e4
370 >;
371 };
372
373 pinctrl_fec: fecgrp {
374 fsl,pins = <
375 MX53_PAD_FEC_MDC__FEC_MDC 0x1e4
376 MX53_PAD_FEC_MDIO__FEC_MDIO 0x1e4
377 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x1e4
378 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1e4
379 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x1e4
380 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x1e4
381 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x1e4
382 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x1c4
383 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x1e4
384 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x1e4
385 MX53_PAD_PATA_DA_1__GPIO7_7 0x1e4
386 MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
387 >;
388 };
389
390 pinctrl_i2c1: i2c1grp {
391 fsl,pins = <
392 MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4
393 MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4
394 >;
395 };
396
397 pinctrl_i2c3: i2c3grp {
398 fsl,pins = <
399 MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4
400 MX53_PAD_GPIO_5__I2C3_SCL 0x400001e4
401 >;
402 };
403
404 pinctrl_lvds0: lvds0grp {
405 /* LVDS pins only have pin mux configuration */
406 fsl,pins = <
407 MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
408 MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
409 MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
410 MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
411 MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
412 >;
413 };
414
415 pinctrl_power_button: powerbutgrp {
416 fsl,pins = <
417 MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4
418 >;
419 };
420
421 pinctrl_power_out: poweroutgrp {
422 fsl,pins = <
423 MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4
424 >;
425 };
426
427 pinctrl_uart1: uart1grp {
428 fsl,pins = <
429 MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
430 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
431 MX53_PAD_PATA_IORDY__UART1_RTS 0x1e4
432 MX53_PAD_PATA_RESET_B__UART1_CTS 0x1e4
433 >;
434 };
435
436 pinctrl_uart2: uart2grp {
437 fsl,pins = <
438 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
439 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
440 MX53_PAD_PATA_DIOR__UART2_RTS 0x1e4
441 MX53_PAD_PATA_INTRQ__UART2_CTS 0x1e4
442 >;
443 };
444
445 pinctrl_uart3: uart3grp {
446 fsl,pins = <
447 MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
448 MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
449 MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
450 >;
451 };
452
453 pinctrl_usb: usbgrp {
454 fsl,pins = <
455 MX53_PAD_GPIO_2__GPIO1_2 0x1c4
456 MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4
457 MX53_PAD_GPIO_4__GPIO1_4 0x1c4
458 MX53_PAD_GPIO_18__GPIO7_13 0x1c4
459 >;
460 };
461 };
462};
463
464&ldb {
465 pinctrl-names = "default";
466 pinctrl-0 = <&pinctrl_lvds0>;
467 status = "okay";
468
469 lvds0: lvds-channel@0 {
470 reg = <0>;
471 fsl,data-mapping = "spwg";
472 fsl,data-width = <18>;
473 status = "okay";
474
475 port@2 {
476 reg = <2>;
477
478 lvds0_out: endpoint {
479 remote-endpoint = <&lvds_decoder_in>;
480 };
481 };
482 };
483};
484
485&uart1 {
486 pinctrl-names = "default";
487 pinctrl-0 = <&pinctrl_uart1>;
488 uart-has-rtscts;
489 status = "okay";
490};
491
492&uart2 {
493 pinctrl-names = "default";
494 pinctrl-0 = <&pinctrl_uart2>;
495 uart-has-rtscts;
496 status = "okay";
497};
498
499&uart3 {
500 pinctrl-names = "default";
501 pinctrl-0 = <&pinctrl_uart3>;
502 linux,rs485-enabled-at-boot-time;
503 status = "okay";
504};
505
506&usbh1 {
507 pinctrl-names = "default";
508 pinctrl-0 = <&pinctrl_usb>;
509 vbus-supply = <&reg_usbh1_vbus>;
510 phy_type = "utmi";
511 dr_mode = "host";
512 status = "okay";
513};
514
515&usbotg {
516 dr_mode = "peripheral";
517 status = "okay";
518};