Kishon Vijay Abraham I | 1530fe3 | 2015-02-23 18:39:50 +0530 | [diff] [blame] | 1 | /** |
| 2 | * dwc3-omap.c - OMAP Specific Glue layer |
| 3 | * |
Kishon Vijay Abraham I | d1e431a | 2015-02-23 18:39:52 +0530 | [diff] [blame^] | 4 | * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com |
Kishon Vijay Abraham I | 1530fe3 | 2015-02-23 18:39:50 +0530 | [diff] [blame] | 5 | * |
| 6 | * Authors: Felipe Balbi <balbi@ti.com>, |
| 7 | * Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| 8 | * |
Kishon Vijay Abraham I | d1e431a | 2015-02-23 18:39:52 +0530 | [diff] [blame^] | 9 | * Taken from Linux Kernel v3.19-rc1 (drivers/usb/dwc3/dwc3-omap.c) and ported |
| 10 | * to uboot. |
| 11 | * |
| 12 | * commit 7ee2566ff5 : usb: dwc3: dwc3-omap: get rid of ->prepare()/->complete() |
Kishon Vijay Abraham I | 1530fe3 | 2015-02-23 18:39:50 +0530 | [diff] [blame] | 13 | * |
Kishon Vijay Abraham I | d1e431a | 2015-02-23 18:39:52 +0530 | [diff] [blame^] | 14 | * SPDX-License-Identifier: GPL-2.0 |
Kishon Vijay Abraham I | 1530fe3 | 2015-02-23 18:39:50 +0530 | [diff] [blame] | 15 | */ |
| 16 | |
| 17 | #include <linux/module.h> |
| 18 | #include <linux/kernel.h> |
| 19 | #include <linux/slab.h> |
| 20 | #include <linux/interrupt.h> |
| 21 | #include <linux/platform_device.h> |
| 22 | #include <linux/platform_data/dwc3-omap.h> |
| 23 | #include <linux/pm_runtime.h> |
| 24 | #include <linux/dma-mapping.h> |
| 25 | #include <linux/ioport.h> |
| 26 | #include <linux/io.h> |
| 27 | #include <linux/of.h> |
| 28 | #include <linux/of_platform.h> |
| 29 | #include <linux/extcon.h> |
| 30 | #include <linux/regulator/consumer.h> |
| 31 | |
| 32 | #include <linux/usb/otg.h> |
| 33 | |
| 34 | /* |
| 35 | * All these registers belong to OMAP's Wrapper around the |
| 36 | * DesignWare USB3 Core. |
| 37 | */ |
| 38 | |
| 39 | #define USBOTGSS_REVISION 0x0000 |
| 40 | #define USBOTGSS_SYSCONFIG 0x0010 |
| 41 | #define USBOTGSS_IRQ_EOI 0x0020 |
| 42 | #define USBOTGSS_EOI_OFFSET 0x0008 |
| 43 | #define USBOTGSS_IRQSTATUS_RAW_0 0x0024 |
| 44 | #define USBOTGSS_IRQSTATUS_0 0x0028 |
| 45 | #define USBOTGSS_IRQENABLE_SET_0 0x002c |
| 46 | #define USBOTGSS_IRQENABLE_CLR_0 0x0030 |
| 47 | #define USBOTGSS_IRQ0_OFFSET 0x0004 |
| 48 | #define USBOTGSS_IRQSTATUS_RAW_1 0x0030 |
| 49 | #define USBOTGSS_IRQSTATUS_1 0x0034 |
| 50 | #define USBOTGSS_IRQENABLE_SET_1 0x0038 |
| 51 | #define USBOTGSS_IRQENABLE_CLR_1 0x003c |
| 52 | #define USBOTGSS_IRQSTATUS_RAW_2 0x0040 |
| 53 | #define USBOTGSS_IRQSTATUS_2 0x0044 |
| 54 | #define USBOTGSS_IRQENABLE_SET_2 0x0048 |
| 55 | #define USBOTGSS_IRQENABLE_CLR_2 0x004c |
| 56 | #define USBOTGSS_IRQSTATUS_RAW_3 0x0050 |
| 57 | #define USBOTGSS_IRQSTATUS_3 0x0054 |
| 58 | #define USBOTGSS_IRQENABLE_SET_3 0x0058 |
| 59 | #define USBOTGSS_IRQENABLE_CLR_3 0x005c |
| 60 | #define USBOTGSS_IRQSTATUS_EOI_MISC 0x0030 |
| 61 | #define USBOTGSS_IRQSTATUS_RAW_MISC 0x0034 |
| 62 | #define USBOTGSS_IRQSTATUS_MISC 0x0038 |
| 63 | #define USBOTGSS_IRQENABLE_SET_MISC 0x003c |
| 64 | #define USBOTGSS_IRQENABLE_CLR_MISC 0x0040 |
| 65 | #define USBOTGSS_IRQMISC_OFFSET 0x03fc |
| 66 | #define USBOTGSS_UTMI_OTG_CTRL 0x0080 |
| 67 | #define USBOTGSS_UTMI_OTG_STATUS 0x0084 |
| 68 | #define USBOTGSS_UTMI_OTG_OFFSET 0x0480 |
| 69 | #define USBOTGSS_TXFIFO_DEPTH 0x0508 |
| 70 | #define USBOTGSS_RXFIFO_DEPTH 0x050c |
| 71 | #define USBOTGSS_MMRAM_OFFSET 0x0100 |
| 72 | #define USBOTGSS_FLADJ 0x0104 |
| 73 | #define USBOTGSS_DEBUG_CFG 0x0108 |
| 74 | #define USBOTGSS_DEBUG_DATA 0x010c |
| 75 | #define USBOTGSS_DEV_EBC_EN 0x0110 |
| 76 | #define USBOTGSS_DEBUG_OFFSET 0x0600 |
| 77 | |
| 78 | /* SYSCONFIG REGISTER */ |
| 79 | #define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16) |
| 80 | |
| 81 | /* IRQ_EOI REGISTER */ |
| 82 | #define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0) |
| 83 | |
| 84 | /* IRQS0 BITS */ |
| 85 | #define USBOTGSS_IRQO_COREIRQ_ST (1 << 0) |
| 86 | |
| 87 | /* IRQMISC BITS */ |
| 88 | #define USBOTGSS_IRQMISC_DMADISABLECLR (1 << 17) |
| 89 | #define USBOTGSS_IRQMISC_OEVT (1 << 16) |
| 90 | #define USBOTGSS_IRQMISC_DRVVBUS_RISE (1 << 13) |
| 91 | #define USBOTGSS_IRQMISC_CHRGVBUS_RISE (1 << 12) |
| 92 | #define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE (1 << 11) |
| 93 | #define USBOTGSS_IRQMISC_IDPULLUP_RISE (1 << 8) |
| 94 | #define USBOTGSS_IRQMISC_DRVVBUS_FALL (1 << 5) |
| 95 | #define USBOTGSS_IRQMISC_CHRGVBUS_FALL (1 << 4) |
| 96 | #define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL (1 << 3) |
| 97 | #define USBOTGSS_IRQMISC_IDPULLUP_FALL (1 << 0) |
| 98 | |
| 99 | /* UTMI_OTG_CTRL REGISTER */ |
| 100 | #define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5) |
| 101 | #define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS (1 << 4) |
| 102 | #define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS (1 << 3) |
| 103 | #define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP (1 << 0) |
| 104 | |
| 105 | /* UTMI_OTG_STATUS REGISTER */ |
| 106 | #define USBOTGSS_UTMI_OTG_STATUS_SW_MODE (1 << 31) |
| 107 | #define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT (1 << 9) |
| 108 | #define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8) |
| 109 | #define USBOTGSS_UTMI_OTG_STATUS_IDDIG (1 << 4) |
| 110 | #define USBOTGSS_UTMI_OTG_STATUS_SESSEND (1 << 3) |
| 111 | #define USBOTGSS_UTMI_OTG_STATUS_SESSVALID (1 << 2) |
| 112 | #define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID (1 << 1) |
| 113 | |
| 114 | struct dwc3_omap { |
| 115 | struct device *dev; |
| 116 | |
| 117 | int irq; |
| 118 | void __iomem *base; |
| 119 | |
| 120 | u32 utmi_otg_status; |
| 121 | u32 utmi_otg_offset; |
| 122 | u32 irqmisc_offset; |
| 123 | u32 irq_eoi_offset; |
| 124 | u32 debug_offset; |
| 125 | u32 irq0_offset; |
| 126 | |
| 127 | u32 dma_status:1; |
| 128 | |
| 129 | struct extcon_specific_cable_nb extcon_vbus_dev; |
| 130 | struct extcon_specific_cable_nb extcon_id_dev; |
| 131 | struct notifier_block vbus_nb; |
| 132 | struct notifier_block id_nb; |
| 133 | |
| 134 | struct regulator *vbus_reg; |
| 135 | }; |
| 136 | |
| 137 | enum omap_dwc3_vbus_id_status { |
| 138 | OMAP_DWC3_ID_FLOAT, |
| 139 | OMAP_DWC3_ID_GROUND, |
| 140 | OMAP_DWC3_VBUS_OFF, |
| 141 | OMAP_DWC3_VBUS_VALID, |
| 142 | }; |
| 143 | |
| 144 | static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset) |
| 145 | { |
| 146 | return readl(base + offset); |
| 147 | } |
| 148 | |
| 149 | static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) |
| 150 | { |
| 151 | writel(value, base + offset); |
| 152 | } |
| 153 | |
| 154 | static u32 dwc3_omap_read_utmi_status(struct dwc3_omap *omap) |
| 155 | { |
| 156 | return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS + |
| 157 | omap->utmi_otg_offset); |
| 158 | } |
| 159 | |
| 160 | static void dwc3_omap_write_utmi_status(struct dwc3_omap *omap, u32 value) |
| 161 | { |
| 162 | dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS + |
| 163 | omap->utmi_otg_offset, value); |
| 164 | |
| 165 | } |
| 166 | |
| 167 | static u32 dwc3_omap_read_irq0_status(struct dwc3_omap *omap) |
| 168 | { |
| 169 | return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0 - |
| 170 | omap->irq0_offset); |
| 171 | } |
| 172 | |
| 173 | static void dwc3_omap_write_irq0_status(struct dwc3_omap *omap, u32 value) |
| 174 | { |
| 175 | dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0 - |
| 176 | omap->irq0_offset, value); |
| 177 | |
| 178 | } |
| 179 | |
| 180 | static u32 dwc3_omap_read_irqmisc_status(struct dwc3_omap *omap) |
| 181 | { |
| 182 | return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_MISC + |
| 183 | omap->irqmisc_offset); |
| 184 | } |
| 185 | |
| 186 | static void dwc3_omap_write_irqmisc_status(struct dwc3_omap *omap, u32 value) |
| 187 | { |
| 188 | dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_MISC + |
| 189 | omap->irqmisc_offset, value); |
| 190 | |
| 191 | } |
| 192 | |
| 193 | static void dwc3_omap_write_irqmisc_set(struct dwc3_omap *omap, u32 value) |
| 194 | { |
| 195 | dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_MISC + |
| 196 | omap->irqmisc_offset, value); |
| 197 | |
| 198 | } |
| 199 | |
| 200 | static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value) |
| 201 | { |
| 202 | dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0 - |
| 203 | omap->irq0_offset, value); |
| 204 | } |
| 205 | |
| 206 | static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, |
| 207 | enum omap_dwc3_vbus_id_status status) |
| 208 | { |
| 209 | int ret; |
| 210 | u32 val; |
| 211 | |
| 212 | switch (status) { |
| 213 | case OMAP_DWC3_ID_GROUND: |
| 214 | dev_dbg(omap->dev, "ID GND\n"); |
| 215 | |
| 216 | if (omap->vbus_reg) { |
| 217 | ret = regulator_enable(omap->vbus_reg); |
| 218 | if (ret) { |
| 219 | dev_dbg(omap->dev, "regulator enable failed\n"); |
| 220 | return; |
| 221 | } |
| 222 | } |
| 223 | |
| 224 | val = dwc3_omap_read_utmi_status(omap); |
| 225 | val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG |
| 226 | | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID |
| 227 | | USBOTGSS_UTMI_OTG_STATUS_SESSEND); |
| 228 | val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID |
| 229 | | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; |
| 230 | dwc3_omap_write_utmi_status(omap, val); |
| 231 | break; |
| 232 | |
| 233 | case OMAP_DWC3_VBUS_VALID: |
| 234 | dev_dbg(omap->dev, "VBUS Connect\n"); |
| 235 | |
| 236 | val = dwc3_omap_read_utmi_status(omap); |
| 237 | val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND; |
| 238 | val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG |
| 239 | | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID |
| 240 | | USBOTGSS_UTMI_OTG_STATUS_SESSVALID |
| 241 | | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; |
| 242 | dwc3_omap_write_utmi_status(omap, val); |
| 243 | break; |
| 244 | |
| 245 | case OMAP_DWC3_ID_FLOAT: |
| 246 | if (omap->vbus_reg) |
| 247 | regulator_disable(omap->vbus_reg); |
| 248 | |
| 249 | case OMAP_DWC3_VBUS_OFF: |
| 250 | dev_dbg(omap->dev, "VBUS Disconnect\n"); |
| 251 | |
| 252 | val = dwc3_omap_read_utmi_status(omap); |
| 253 | val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID |
| 254 | | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID |
| 255 | | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT); |
| 256 | val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND |
| 257 | | USBOTGSS_UTMI_OTG_STATUS_IDDIG; |
| 258 | dwc3_omap_write_utmi_status(omap, val); |
| 259 | break; |
| 260 | |
| 261 | default: |
| 262 | dev_dbg(omap->dev, "invalid state\n"); |
| 263 | } |
| 264 | } |
| 265 | |
| 266 | static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) |
| 267 | { |
| 268 | struct dwc3_omap *omap = _omap; |
| 269 | u32 reg; |
| 270 | |
| 271 | reg = dwc3_omap_read_irqmisc_status(omap); |
| 272 | |
| 273 | if (reg & USBOTGSS_IRQMISC_DMADISABLECLR) { |
| 274 | dev_dbg(omap->dev, "DMA Disable was Cleared\n"); |
| 275 | omap->dma_status = false; |
| 276 | } |
| 277 | |
| 278 | if (reg & USBOTGSS_IRQMISC_OEVT) |
| 279 | dev_dbg(omap->dev, "OTG Event\n"); |
| 280 | |
| 281 | if (reg & USBOTGSS_IRQMISC_DRVVBUS_RISE) |
| 282 | dev_dbg(omap->dev, "DRVVBUS Rise\n"); |
| 283 | |
| 284 | if (reg & USBOTGSS_IRQMISC_CHRGVBUS_RISE) |
| 285 | dev_dbg(omap->dev, "CHRGVBUS Rise\n"); |
| 286 | |
| 287 | if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_RISE) |
| 288 | dev_dbg(omap->dev, "DISCHRGVBUS Rise\n"); |
| 289 | |
| 290 | if (reg & USBOTGSS_IRQMISC_IDPULLUP_RISE) |
| 291 | dev_dbg(omap->dev, "IDPULLUP Rise\n"); |
| 292 | |
| 293 | if (reg & USBOTGSS_IRQMISC_DRVVBUS_FALL) |
| 294 | dev_dbg(omap->dev, "DRVVBUS Fall\n"); |
| 295 | |
| 296 | if (reg & USBOTGSS_IRQMISC_CHRGVBUS_FALL) |
| 297 | dev_dbg(omap->dev, "CHRGVBUS Fall\n"); |
| 298 | |
| 299 | if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_FALL) |
| 300 | dev_dbg(omap->dev, "DISCHRGVBUS Fall\n"); |
| 301 | |
| 302 | if (reg & USBOTGSS_IRQMISC_IDPULLUP_FALL) |
| 303 | dev_dbg(omap->dev, "IDPULLUP Fall\n"); |
| 304 | |
| 305 | dwc3_omap_write_irqmisc_status(omap, reg); |
| 306 | |
| 307 | reg = dwc3_omap_read_irq0_status(omap); |
| 308 | |
| 309 | dwc3_omap_write_irq0_status(omap, reg); |
| 310 | |
| 311 | return IRQ_HANDLED; |
| 312 | } |
| 313 | |
| 314 | static int dwc3_omap_remove_core(struct device *dev, void *c) |
| 315 | { |
| 316 | struct platform_device *pdev = to_platform_device(dev); |
| 317 | |
| 318 | of_device_unregister(pdev); |
| 319 | |
| 320 | return 0; |
| 321 | } |
| 322 | |
| 323 | static void dwc3_omap_enable_irqs(struct dwc3_omap *omap) |
| 324 | { |
| 325 | u32 reg; |
| 326 | |
| 327 | /* enable all IRQs */ |
| 328 | reg = USBOTGSS_IRQO_COREIRQ_ST; |
| 329 | dwc3_omap_write_irq0_set(omap, reg); |
| 330 | |
| 331 | reg = (USBOTGSS_IRQMISC_OEVT | |
| 332 | USBOTGSS_IRQMISC_DRVVBUS_RISE | |
| 333 | USBOTGSS_IRQMISC_CHRGVBUS_RISE | |
| 334 | USBOTGSS_IRQMISC_DISCHRGVBUS_RISE | |
| 335 | USBOTGSS_IRQMISC_IDPULLUP_RISE | |
| 336 | USBOTGSS_IRQMISC_DRVVBUS_FALL | |
| 337 | USBOTGSS_IRQMISC_CHRGVBUS_FALL | |
| 338 | USBOTGSS_IRQMISC_DISCHRGVBUS_FALL | |
| 339 | USBOTGSS_IRQMISC_IDPULLUP_FALL); |
| 340 | |
| 341 | dwc3_omap_write_irqmisc_set(omap, reg); |
| 342 | } |
| 343 | |
| 344 | static void dwc3_omap_disable_irqs(struct dwc3_omap *omap) |
| 345 | { |
| 346 | /* disable all IRQs */ |
| 347 | dwc3_omap_write_irqmisc_set(omap, 0x00); |
| 348 | dwc3_omap_write_irq0_set(omap, 0x00); |
| 349 | } |
| 350 | |
| 351 | static u64 dwc3_omap_dma_mask = DMA_BIT_MASK(32); |
| 352 | |
| 353 | static int dwc3_omap_id_notifier(struct notifier_block *nb, |
| 354 | unsigned long event, void *ptr) |
| 355 | { |
| 356 | struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, id_nb); |
| 357 | |
| 358 | if (event) |
| 359 | dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND); |
| 360 | else |
| 361 | dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT); |
| 362 | |
| 363 | return NOTIFY_DONE; |
| 364 | } |
| 365 | |
| 366 | static int dwc3_omap_vbus_notifier(struct notifier_block *nb, |
| 367 | unsigned long event, void *ptr) |
| 368 | { |
| 369 | struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, vbus_nb); |
| 370 | |
| 371 | if (event) |
| 372 | dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID); |
| 373 | else |
| 374 | dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF); |
| 375 | |
| 376 | return NOTIFY_DONE; |
| 377 | } |
| 378 | |
| 379 | static void dwc3_omap_map_offset(struct dwc3_omap *omap) |
| 380 | { |
| 381 | struct device_node *node = omap->dev->of_node; |
| 382 | |
| 383 | /* |
| 384 | * Differentiate between OMAP5 and AM437x. |
| 385 | * |
| 386 | * For OMAP5(ES2.0) and AM437x wrapper revision is same, even |
| 387 | * though there are changes in wrapper register offsets. |
| 388 | * |
| 389 | * Using dt compatible to differentiate AM437x. |
| 390 | */ |
| 391 | if (of_device_is_compatible(node, "ti,am437x-dwc3")) { |
| 392 | omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET; |
| 393 | omap->irq0_offset = USBOTGSS_IRQ0_OFFSET; |
| 394 | omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET; |
| 395 | omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET; |
| 396 | omap->debug_offset = USBOTGSS_DEBUG_OFFSET; |
| 397 | } |
| 398 | } |
| 399 | |
| 400 | static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap) |
| 401 | { |
| 402 | u32 reg; |
| 403 | struct device_node *node = omap->dev->of_node; |
| 404 | int utmi_mode = 0; |
| 405 | |
| 406 | reg = dwc3_omap_read_utmi_status(omap); |
| 407 | |
| 408 | of_property_read_u32(node, "utmi-mode", &utmi_mode); |
| 409 | |
| 410 | switch (utmi_mode) { |
| 411 | case DWC3_OMAP_UTMI_MODE_SW: |
| 412 | reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; |
| 413 | break; |
| 414 | case DWC3_OMAP_UTMI_MODE_HW: |
| 415 | reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; |
| 416 | break; |
| 417 | default: |
| 418 | dev_dbg(omap->dev, "UNKNOWN utmi mode %d\n", utmi_mode); |
| 419 | } |
| 420 | |
| 421 | dwc3_omap_write_utmi_status(omap, reg); |
| 422 | } |
| 423 | |
| 424 | static int dwc3_omap_extcon_register(struct dwc3_omap *omap) |
| 425 | { |
| 426 | int ret; |
| 427 | struct device_node *node = omap->dev->of_node; |
| 428 | struct extcon_dev *edev; |
| 429 | |
| 430 | if (of_property_read_bool(node, "extcon")) { |
| 431 | edev = extcon_get_edev_by_phandle(omap->dev, 0); |
| 432 | if (IS_ERR(edev)) { |
| 433 | dev_vdbg(omap->dev, "couldn't get extcon device\n"); |
| 434 | return -EPROBE_DEFER; |
| 435 | } |
| 436 | |
| 437 | omap->vbus_nb.notifier_call = dwc3_omap_vbus_notifier; |
| 438 | ret = extcon_register_interest(&omap->extcon_vbus_dev, |
| 439 | edev->name, "USB", |
| 440 | &omap->vbus_nb); |
| 441 | if (ret < 0) |
| 442 | dev_vdbg(omap->dev, "failed to register notifier for USB\n"); |
| 443 | |
| 444 | omap->id_nb.notifier_call = dwc3_omap_id_notifier; |
| 445 | ret = extcon_register_interest(&omap->extcon_id_dev, |
| 446 | edev->name, "USB-HOST", |
| 447 | &omap->id_nb); |
| 448 | if (ret < 0) |
| 449 | dev_vdbg(omap->dev, "failed to register notifier for USB-HOST\n"); |
| 450 | |
| 451 | if (extcon_get_cable_state(edev, "USB") == true) |
| 452 | dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID); |
| 453 | if (extcon_get_cable_state(edev, "USB-HOST") == true) |
| 454 | dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND); |
| 455 | } |
| 456 | |
| 457 | return 0; |
| 458 | } |
| 459 | |
| 460 | static int dwc3_omap_probe(struct platform_device *pdev) |
| 461 | { |
| 462 | struct device_node *node = pdev->dev.of_node; |
| 463 | |
| 464 | struct dwc3_omap *omap; |
| 465 | struct resource *res; |
| 466 | struct device *dev = &pdev->dev; |
| 467 | struct regulator *vbus_reg = NULL; |
| 468 | |
| 469 | int ret; |
| 470 | int irq; |
| 471 | |
| 472 | u32 reg; |
| 473 | |
| 474 | void __iomem *base; |
| 475 | |
| 476 | if (!node) { |
| 477 | dev_err(dev, "device node not found\n"); |
| 478 | return -EINVAL; |
| 479 | } |
| 480 | |
| 481 | omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); |
| 482 | if (!omap) |
| 483 | return -ENOMEM; |
| 484 | |
| 485 | platform_set_drvdata(pdev, omap); |
| 486 | |
| 487 | irq = platform_get_irq(pdev, 0); |
| 488 | if (irq < 0) { |
| 489 | dev_err(dev, "missing IRQ resource\n"); |
| 490 | return -EINVAL; |
| 491 | } |
| 492 | |
| 493 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 494 | base = devm_ioremap_resource(dev, res); |
| 495 | if (IS_ERR(base)) |
| 496 | return PTR_ERR(base); |
| 497 | |
| 498 | if (of_property_read_bool(node, "vbus-supply")) { |
| 499 | vbus_reg = devm_regulator_get(dev, "vbus"); |
| 500 | if (IS_ERR(vbus_reg)) { |
| 501 | dev_err(dev, "vbus init failed\n"); |
| 502 | return PTR_ERR(vbus_reg); |
| 503 | } |
| 504 | } |
| 505 | |
| 506 | omap->dev = dev; |
| 507 | omap->irq = irq; |
| 508 | omap->base = base; |
| 509 | omap->vbus_reg = vbus_reg; |
| 510 | dev->dma_mask = &dwc3_omap_dma_mask; |
| 511 | |
| 512 | pm_runtime_enable(dev); |
| 513 | ret = pm_runtime_get_sync(dev); |
| 514 | if (ret < 0) { |
| 515 | dev_err(dev, "get_sync failed with err %d\n", ret); |
| 516 | goto err0; |
| 517 | } |
| 518 | |
| 519 | dwc3_omap_map_offset(omap); |
| 520 | dwc3_omap_set_utmi_mode(omap); |
| 521 | |
| 522 | /* check the DMA Status */ |
| 523 | reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); |
| 524 | omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE); |
| 525 | |
| 526 | ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0, |
| 527 | "dwc3-omap", omap); |
| 528 | if (ret) { |
| 529 | dev_err(dev, "failed to request IRQ #%d --> %d\n", |
| 530 | omap->irq, ret); |
| 531 | goto err1; |
| 532 | } |
| 533 | |
| 534 | dwc3_omap_enable_irqs(omap); |
| 535 | |
| 536 | ret = dwc3_omap_extcon_register(omap); |
| 537 | if (ret < 0) |
| 538 | goto err2; |
| 539 | |
| 540 | ret = of_platform_populate(node, NULL, NULL, dev); |
| 541 | if (ret) { |
| 542 | dev_err(&pdev->dev, "failed to create dwc3 core\n"); |
| 543 | goto err3; |
| 544 | } |
| 545 | |
| 546 | return 0; |
| 547 | |
| 548 | err3: |
| 549 | if (omap->extcon_vbus_dev.edev) |
| 550 | extcon_unregister_interest(&omap->extcon_vbus_dev); |
| 551 | if (omap->extcon_id_dev.edev) |
| 552 | extcon_unregister_interest(&omap->extcon_id_dev); |
| 553 | |
| 554 | err2: |
| 555 | dwc3_omap_disable_irqs(omap); |
| 556 | |
| 557 | err1: |
| 558 | pm_runtime_put_sync(dev); |
| 559 | |
| 560 | err0: |
| 561 | pm_runtime_disable(dev); |
| 562 | |
| 563 | return ret; |
| 564 | } |
| 565 | |
| 566 | static int dwc3_omap_remove(struct platform_device *pdev) |
| 567 | { |
| 568 | struct dwc3_omap *omap = platform_get_drvdata(pdev); |
| 569 | |
| 570 | if (omap->extcon_vbus_dev.edev) |
| 571 | extcon_unregister_interest(&omap->extcon_vbus_dev); |
| 572 | if (omap->extcon_id_dev.edev) |
| 573 | extcon_unregister_interest(&omap->extcon_id_dev); |
| 574 | dwc3_omap_disable_irqs(omap); |
| 575 | device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core); |
| 576 | pm_runtime_put_sync(&pdev->dev); |
| 577 | pm_runtime_disable(&pdev->dev); |
| 578 | |
| 579 | return 0; |
| 580 | } |
| 581 | |
| 582 | static const struct of_device_id of_dwc3_match[] = { |
| 583 | { |
| 584 | .compatible = "ti,dwc3" |
| 585 | }, |
| 586 | { |
| 587 | .compatible = "ti,am437x-dwc3" |
| 588 | }, |
| 589 | { }, |
| 590 | }; |
| 591 | MODULE_DEVICE_TABLE(of, of_dwc3_match); |
| 592 | |
| 593 | #ifdef CONFIG_PM_SLEEP |
| 594 | static int dwc3_omap_suspend(struct device *dev) |
| 595 | { |
| 596 | struct dwc3_omap *omap = dev_get_drvdata(dev); |
| 597 | |
| 598 | omap->utmi_otg_status = dwc3_omap_read_utmi_status(omap); |
| 599 | dwc3_omap_disable_irqs(omap); |
| 600 | |
| 601 | return 0; |
| 602 | } |
| 603 | |
| 604 | static int dwc3_omap_resume(struct device *dev) |
| 605 | { |
| 606 | struct dwc3_omap *omap = dev_get_drvdata(dev); |
| 607 | |
| 608 | dwc3_omap_write_utmi_status(omap, omap->utmi_otg_status); |
| 609 | dwc3_omap_enable_irqs(omap); |
| 610 | |
| 611 | pm_runtime_disable(dev); |
| 612 | pm_runtime_set_active(dev); |
| 613 | pm_runtime_enable(dev); |
| 614 | |
| 615 | return 0; |
| 616 | } |
| 617 | |
| 618 | static const struct dev_pm_ops dwc3_omap_dev_pm_ops = { |
| 619 | |
| 620 | SET_SYSTEM_SLEEP_PM_OPS(dwc3_omap_suspend, dwc3_omap_resume) |
| 621 | }; |
| 622 | |
| 623 | #define DEV_PM_OPS (&dwc3_omap_dev_pm_ops) |
| 624 | #else |
| 625 | #define DEV_PM_OPS NULL |
| 626 | #endif /* CONFIG_PM_SLEEP */ |
| 627 | |
| 628 | static struct platform_driver dwc3_omap_driver = { |
| 629 | .probe = dwc3_omap_probe, |
| 630 | .remove = dwc3_omap_remove, |
| 631 | .driver = { |
| 632 | .name = "omap-dwc3", |
| 633 | .of_match_table = of_dwc3_match, |
| 634 | .pm = DEV_PM_OPS, |
| 635 | }, |
| 636 | }; |
| 637 | |
| 638 | module_platform_driver(dwc3_omap_driver); |
| 639 | |
| 640 | MODULE_ALIAS("platform:omap-dwc3"); |
| 641 | MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); |
| 642 | MODULE_LICENSE("GPL v2"); |
| 643 | MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer"); |