| Heiko Schocher | 914aff1 | 2016-05-25 07:23:45 +0200 | [diff] [blame] | 1 | /* |
| 2 | * at91sam9g45-corvus.dts Device Tree file fir Siemens corvus board |
| 3 | * (C) Copyright 2016 Heiko Schocher <hs@denx.de> |
| 4 | * |
| 5 | * based on: |
| 6 | * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board |
| 7 | * |
| 8 | * Copyright (C) 2011 Atmel, |
| 9 | * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> |
| 10 | * |
| 11 | * SPDX-License-Identifier: GPL-2.0+ |
| 12 | */ |
| 13 | /dts-v1/; |
| 14 | #include "at91sam9g45.dtsi" |
| 15 | |
| 16 | / { |
| 17 | model = "Siemens corvus"; |
| 18 | compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; |
| 19 | |
| 20 | chosen { |
| 21 | stdout-path = &dbgu; |
| 22 | }; |
| 23 | |
| 24 | memory { |
| 25 | reg = <0x70000000 0x8000000>; |
| 26 | }; |
| 27 | |
| 28 | clocks { |
| 29 | slow_xtal { |
| 30 | clock-frequency = <32768>; |
| 31 | }; |
| 32 | |
| 33 | main_xtal { |
| 34 | clock-frequency = <12000000>; |
| 35 | }; |
| 36 | }; |
| 37 | |
| 38 | ahb { |
| 39 | apb { |
| 40 | dbgu: serial@ffffee00 { |
| 41 | status = "okay"; |
| 42 | }; |
| 43 | |
| 44 | usart1: serial@fff90000 { |
| 45 | pinctrl-0 = |
| 46 | <&pinctrl_usart1 |
| 47 | &pinctrl_usart1_rts |
| 48 | &pinctrl_usart1_cts>; |
| 49 | status = "okay"; |
| 50 | }; |
| 51 | |
| 52 | macb0: ethernet@fffbc000 { |
| 53 | phy-mode = "rmii"; |
| 54 | status = "okay"; |
| 55 | }; |
| 56 | |
| 57 | watchdog@fffffd40 { |
| 58 | status = "okay"; |
| 59 | }; |
| 60 | |
| 61 | spi0: spi@fffa4000{ |
| 62 | status = "okay"; |
| 63 | cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; |
| 64 | mtd_dataflash@0 { |
| 65 | compatible = "atmel,at45", "atmel,dataflash"; |
| 66 | spi-max-frequency = <13000000>; |
| 67 | reg = <0>; |
| 68 | }; |
| 69 | }; |
| 70 | |
| 71 | usb2: gadget@fff78000 { |
| 72 | atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; |
| 73 | status = "okay"; |
| 74 | }; |
| 75 | |
| 76 | rtc@fffffd20 { |
| 77 | atmel,rtt-rtc-time-reg = <&gpbr 0x0>; |
| 78 | status = "okay"; |
| 79 | }; |
| 80 | |
| 81 | gpbr: syscon@fffffd60 { |
| 82 | status = "okay"; |
| 83 | }; |
| 84 | |
| 85 | rtc@fffffdb0 { |
| 86 | status = "okay"; |
| 87 | }; |
| 88 | }; |
| 89 | |
| 90 | nand0: nand@40000000 { |
| 91 | nand-bus-width = <8>; |
| 92 | nand-ecc-mode = "soft"; |
| 93 | nand-on-flash-bbt; |
| 94 | status = "okay"; |
| 95 | }; |
| 96 | |
| 97 | usb0: ohci@00700000 { |
| 98 | status = "okay"; |
| 99 | num-ports = <2>; |
| 100 | atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW |
| 101 | &pioD 3 GPIO_ACTIVE_LOW>; |
| 102 | }; |
| 103 | |
| 104 | usb1: ehci@00800000 { |
| 105 | status = "okay"; |
| 106 | }; |
| 107 | }; |
| 108 | }; |