Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright 2018-2020 Purism SPC |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "dt-bindings/input/input.h" |
| 9 | #include <dt-bindings/interrupt-controller/irq.h> |
| 10 | #include <dt-bindings/leds/common.h> |
| 11 | #include "dt-bindings/pwm/pwm.h" |
| 12 | #include "dt-bindings/usb/pd.h" |
| 13 | #include "imx8mq.dtsi" |
| 14 | |
| 15 | / { |
| 16 | model = "Purism Librem 5"; |
| 17 | compatible = "purism,librem5", "fsl,imx8mq"; |
| 18 | chassis-type = "handset"; |
| 19 | |
| 20 | backlight_dsi: backlight-dsi { |
| 21 | compatible = "led-backlight"; |
| 22 | leds = <&led_backlight>; |
| 23 | brightness-levels = <255>; |
| 24 | default-brightness-level = <190>; |
| 25 | }; |
| 26 | |
| 27 | pmic_osc: clock-pmic { |
| 28 | compatible = "fixed-clock"; |
| 29 | #clock-cells = <0>; |
| 30 | clock-frequency = <32768>; |
| 31 | clock-output-names = "pmic_osc"; |
| 32 | }; |
| 33 | |
| 34 | chosen { |
| 35 | stdout-path = &uart1; |
| 36 | }; |
| 37 | |
| 38 | gpio-keys { |
| 39 | compatible = "gpio-keys"; |
| 40 | pinctrl-names = "default"; |
| 41 | pinctrl-0 = <&pinctrl_keys>; |
| 42 | |
| 43 | key-vol-down { |
| 44 | label = "VOL_DOWN"; |
| 45 | gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; |
| 46 | linux,code = <KEY_VOLUMEDOWN>; |
| 47 | debounce-interval = <50>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 48 | }; |
| 49 | |
| 50 | key-vol-up { |
| 51 | label = "VOL_UP"; |
| 52 | gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; |
| 53 | linux,code = <KEY_VOLUMEUP>; |
| 54 | debounce-interval = <50>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 55 | }; |
| 56 | }; |
| 57 | |
| 58 | led-controller { |
| 59 | compatible = "pwm-leds-multicolor"; |
| 60 | |
| 61 | multi-led { |
| 62 | color = <LED_COLOR_ID_RGB>; |
| 63 | function = LED_FUNCTION_STATUS; |
| 64 | max-brightness = <248>; |
| 65 | |
| 66 | led-0 { |
| 67 | color = <LED_COLOR_ID_BLUE>; |
| 68 | pwms = <&pwm2 0 50000 0>; |
| 69 | }; |
| 70 | |
| 71 | led-1 { |
| 72 | color = <LED_COLOR_ID_GREEN>; |
| 73 | pwms = <&pwm4 0 50000 0>; |
| 74 | }; |
| 75 | |
| 76 | led-2 { |
| 77 | color = <LED_COLOR_ID_RED>; |
| 78 | pwms = <&pwm3 0 50000 0>; |
| 79 | }; |
| 80 | }; |
| 81 | }; |
| 82 | |
| 83 | reg_aud_1v8: regulator-audio-1v8 { |
| 84 | compatible = "regulator-fixed"; |
| 85 | pinctrl-names = "default"; |
| 86 | pinctrl-0 = <&pinctrl_audiopwr>; |
| 87 | regulator-name = "AUD_1V8"; |
| 88 | regulator-min-microvolt = <1800000>; |
| 89 | regulator-max-microvolt = <1800000>; |
| 90 | gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
| 91 | enable-active-high; |
| 92 | regulator-always-on; |
| 93 | }; |
| 94 | |
| 95 | reg_mic_2v4: regulator-mic-2v4 { |
| 96 | compatible = "regulator-fixed"; |
| 97 | regulator-name = "MIC_2V4"; |
| 98 | regulator-min-microvolt = <2400000>; |
| 99 | regulator-max-microvolt = <2400000>; |
| 100 | vin-supply = <®_aud_1v8>; |
| 101 | }; |
| 102 | |
| 103 | /* |
| 104 | * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC |
| 105 | * since we can't have it twice in the 2 different regulator nodes. |
| 106 | */ |
| 107 | reg_csi_1v8: regulator-csi-1v8 { |
| 108 | compatible = "regulator-fixed"; |
| 109 | regulator-name = "CAMERA_VDDIO_1V8"; |
| 110 | regulator-min-microvolt = <1800000>; |
| 111 | regulator-max-microvolt = <1800000>; |
| 112 | vin-supply = <®_vdd_3v3>; |
| 113 | gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| 114 | enable-active-high; |
| 115 | }; |
| 116 | |
| 117 | /* controlled by the CAMERA_POWER_KEY HKS */ |
| 118 | reg_vcam_1v2: regulator-vcam-1v2 { |
| 119 | compatible = "regulator-fixed"; |
| 120 | regulator-name = "CAMERA_VDDD_1V2"; |
| 121 | regulator-min-microvolt = <1200000>; |
| 122 | regulator-max-microvolt = <1200000>; |
| 123 | vin-supply = <®_vdd_1v8>; |
| 124 | enable-active-high; |
| 125 | }; |
| 126 | |
| 127 | reg_vcam_2v8: regulator-vcam-2v8 { |
| 128 | compatible = "regulator-fixed"; |
| 129 | regulator-name = "CAMERA_VDDA_2V8"; |
| 130 | regulator-min-microvolt = <2800000>; |
| 131 | regulator-max-microvolt = <2800000>; |
| 132 | vin-supply = <®_vdd_3v3>; |
| 133 | gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| 134 | enable-active-high; |
| 135 | }; |
| 136 | |
| 137 | reg_gnss: regulator-gnss { |
| 138 | compatible = "regulator-fixed"; |
| 139 | pinctrl-names = "default"; |
| 140 | pinctrl-0 = <&pinctrl_gnsspwr>; |
| 141 | regulator-name = "GNSS"; |
| 142 | regulator-min-microvolt = <3300000>; |
| 143 | regulator-max-microvolt = <3300000>; |
| 144 | gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>; |
| 145 | enable-active-high; |
| 146 | }; |
| 147 | |
| 148 | reg_hub: regulator-hub { |
| 149 | compatible = "regulator-fixed"; |
| 150 | pinctrl-names = "default"; |
| 151 | pinctrl-0 = <&pinctrl_hub_pwr>; |
| 152 | regulator-name = "HUB"; |
| 153 | regulator-min-microvolt = <3300000>; |
| 154 | regulator-max-microvolt = <3300000>; |
| 155 | gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; |
| 156 | enable-active-high; |
| 157 | }; |
| 158 | |
| 159 | reg_lcd_1v8: regulator-lcd-1v8 { |
| 160 | compatible = "regulator-fixed"; |
| 161 | pinctrl-names = "default"; |
| 162 | pinctrl-0 = <&pinctrl_dsien>; |
| 163 | regulator-name = "LCD_1V8"; |
| 164 | regulator-min-microvolt = <1800000>; |
| 165 | regulator-max-microvolt = <1800000>; |
| 166 | vin-supply = <®_vdd_1v8>; |
| 167 | gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| 168 | enable-active-high; |
| 169 | /* Otherwise i2c3 is not functional */ |
| 170 | regulator-always-on; |
| 171 | }; |
| 172 | |
| 173 | reg_lcd_3v4: regulator-lcd-3v4 { |
| 174 | compatible = "regulator-fixed"; |
| 175 | regulator-name = "LCD_3V4"; |
| 176 | pinctrl-names = "default"; |
| 177 | pinctrl-0 = <&pinctrl_dsibiasen>; |
| 178 | vin-supply = <®_vsys_3v4>; |
| 179 | gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; |
| 180 | enable-active-high; |
| 181 | }; |
| 182 | |
| 183 | reg_vdd_sen: regulator-vdd-sen { |
| 184 | compatible = "regulator-fixed"; |
| 185 | regulator-name = "VDD_SEN"; |
| 186 | regulator-min-microvolt = <3300000>; |
| 187 | regulator-max-microvolt = <3300000>; |
| 188 | }; |
| 189 | |
| 190 | reg_vdd_1v8: regulator-vdd-1v8 { |
| 191 | compatible = "regulator-fixed"; |
| 192 | regulator-name = "VDD_1V8"; |
| 193 | regulator-min-microvolt = <1800000>; |
| 194 | regulator-max-microvolt = <1800000>; |
| 195 | vin-supply = <&buck7_reg>; |
| 196 | }; |
| 197 | |
| 198 | reg_vdd_3v3: regulator-vdd-3v3 { |
| 199 | compatible = "regulator-fixed"; |
| 200 | regulator-name = "VDD_3V3"; |
| 201 | regulator-min-microvolt = <3300000>; |
| 202 | regulator-max-microvolt = <3300000>; |
| 203 | }; |
| 204 | |
| 205 | reg_vsys_3v4: regulator-vsys-3v4 { |
| 206 | compatible = "regulator-fixed"; |
| 207 | regulator-name = "VSYS_3V4"; |
| 208 | regulator-min-microvolt = <3400000>; |
| 209 | regulator-max-microvolt = <3400000>; |
| 210 | regulator-always-on; |
| 211 | }; |
| 212 | |
| 213 | reg_wifi_3v3: regulator-wifi-3v3 { |
| 214 | compatible = "regulator-fixed"; |
| 215 | pinctrl-names = "default"; |
| 216 | pinctrl-0 = <&pinctrl_wifi_pwr>; |
| 217 | regulator-name = "3V3_WIFI"; |
| 218 | regulator-min-microvolt = <3300000>; |
| 219 | regulator-max-microvolt = <3300000>; |
| 220 | gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; |
| 221 | enable-active-high; |
| 222 | vin-supply = <®_vdd_3v3>; |
| 223 | }; |
| 224 | |
| 225 | sound { |
| 226 | compatible = "simple-audio-card"; |
| 227 | pinctrl-names = "default"; |
| 228 | pinctrl-0 = <&pinctrl_hp>; |
| 229 | simple-audio-card,name = "Librem 5"; |
| 230 | simple-audio-card,format = "i2s"; |
| 231 | simple-audio-card,widgets = |
| 232 | "Headphone", "Headphones", |
| 233 | "Microphone", "Headset Mic", |
| 234 | "Microphone", "Digital Mic", |
| 235 | "Speaker", "Speaker"; |
| 236 | simple-audio-card,routing = |
| 237 | "Headphones", "HPOUTL", |
| 238 | "Headphones", "HPOUTR", |
| 239 | "Speaker", "SPKOUTL", |
| 240 | "Speaker", "SPKOUTR", |
| 241 | "Headset Mic", "MICBIAS", |
| 242 | "IN3R", "Headset Mic", |
| 243 | "DMICDAT", "Digital Mic"; |
| 244 | simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; |
| 245 | |
| 246 | simple-audio-card,cpu { |
| 247 | sound-dai = <&sai2>; |
| 248 | }; |
| 249 | |
| 250 | simple-audio-card,codec { |
| 251 | sound-dai = <&codec>; |
| 252 | clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; |
| 253 | frame-master; |
| 254 | bitclock-master; |
| 255 | }; |
| 256 | }; |
| 257 | |
| 258 | sound-wwan { |
| 259 | compatible = "simple-audio-card"; |
| 260 | simple-audio-card,name = "Modem"; |
| 261 | simple-audio-card,format = "i2s"; |
| 262 | |
| 263 | simple-audio-card,cpu { |
| 264 | sound-dai = <&sai6>; |
| 265 | frame-inversion; |
| 266 | }; |
| 267 | |
| 268 | simple-audio-card,codec { |
| 269 | sound-dai = <&bm818_codec>; |
| 270 | frame-master; |
| 271 | bitclock-master; |
| 272 | }; |
| 273 | }; |
| 274 | |
| 275 | usdhc2_pwrseq: pwrseq { |
| 276 | pinctrl-names = "default"; |
| 277 | pinctrl-0 = <&pinctrl_bt>, <&pinctrl_wifi_disable>; |
| 278 | compatible = "mmc-pwrseq-simple"; |
| 279 | reset-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>, |
| 280 | <&gpio4 29 GPIO_ACTIVE_HIGH>; |
| 281 | }; |
| 282 | |
| 283 | bm818_codec: sound-wwan-codec { |
| 284 | compatible = "broadmobi,bm818", "option,gtm601"; |
| 285 | #sound-dai-cells = <0>; |
| 286 | }; |
| 287 | |
| 288 | vibrator { |
| 289 | compatible = "pwm-vibrator"; |
| 290 | pwms = <&pwm1 0 1000000000 0>; |
| 291 | pwm-names = "enable"; |
| 292 | vcc-supply = <®_vdd_3v3>; |
| 293 | }; |
| 294 | }; |
| 295 | |
| 296 | &A53_0 { |
| 297 | cpu-supply = <&buck2_reg>; |
| 298 | }; |
| 299 | |
| 300 | &A53_1 { |
| 301 | cpu-supply = <&buck2_reg>; |
| 302 | }; |
| 303 | |
| 304 | &A53_2 { |
| 305 | cpu-supply = <&buck2_reg>; |
| 306 | }; |
| 307 | |
| 308 | &A53_3 { |
| 309 | cpu-supply = <&buck2_reg>; |
| 310 | }; |
| 311 | |
| 312 | &csi1 { |
| 313 | status = "okay"; |
| 314 | }; |
| 315 | |
| 316 | &ddrc { |
| 317 | operating-points-v2 = <&ddrc_opp_table>; |
| 318 | status = "okay"; |
| 319 | |
| 320 | ddrc_opp_table: opp-table { |
| 321 | compatible = "operating-points-v2"; |
| 322 | |
| 323 | opp-25000000 { |
| 324 | opp-hz = /bits/ 64 <25000000>; |
| 325 | }; |
| 326 | |
| 327 | opp-100000000 { |
| 328 | opp-hz = /bits/ 64 <100000000>; |
| 329 | }; |
| 330 | |
| 331 | opp-166000000 { |
| 332 | opp-hz = /bits/ 64 <166935483>; |
| 333 | }; |
| 334 | |
| 335 | opp-800000000 { |
| 336 | opp-hz = /bits/ 64 <800000000>; |
| 337 | }; |
| 338 | }; |
| 339 | }; |
| 340 | |
| 341 | &dphy { |
| 342 | status = "okay"; |
| 343 | }; |
| 344 | |
| 345 | &ecspi1 { |
| 346 | pinctrl-names = "default"; |
| 347 | pinctrl-0 = <&pinctrl_ecspi1>; |
| 348 | cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; |
| 349 | #address-cells = <1>; |
| 350 | #size-cells = <0>; |
| 351 | status = "okay"; |
| 352 | |
| 353 | nor_flash: flash@0 { |
| 354 | compatible = "jedec,spi-nor"; |
| 355 | reg = <0>; |
| 356 | spi-max-frequency = <1000000>; |
| 357 | #address-cells = <1>; |
| 358 | #size-cells = <1>; |
| 359 | |
| 360 | partition@0 { |
| 361 | label = "protected0"; |
| 362 | reg = <0x0 0x30000>; |
| 363 | read-only; |
| 364 | }; |
| 365 | |
| 366 | partition@30000 { |
| 367 | label = "firmware"; |
| 368 | reg = <0x30000 0x1d0000>; |
| 369 | read-only; |
| 370 | }; |
| 371 | }; |
| 372 | }; |
| 373 | |
| 374 | &gpio1 { |
| 375 | pinctrl-names = "default"; |
| 376 | pinctrl-0 = <&pinctrl_pmic_5v>; |
| 377 | |
| 378 | pmic-5v-hog { |
| 379 | gpio-hog; |
| 380 | gpios = <1 GPIO_ACTIVE_HIGH>; |
| 381 | input; |
| 382 | line-name = "pmic-5v"; |
| 383 | }; |
| 384 | }; |
| 385 | |
| 386 | &iomuxc { |
| 387 | pinctrl-names = "default"; |
| 388 | pinctrl-0 = <&pinctrl_hog>; |
| 389 | |
| 390 | pinctrl_hog: hoggrp { |
| 391 | fsl,pins = < |
| 392 | /* CLKO2 for cameras on both CSI1 and CSI2 */ |
| 393 | MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f |
| 394 | >; |
| 395 | }; |
| 396 | |
| 397 | pinctrl_audiopwr: audiopwrgrp { |
| 398 | fsl,pins = < |
| 399 | /* AUDIO_POWER_EN_3V3 */ |
| 400 | MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x83 |
| 401 | >; |
| 402 | }; |
| 403 | |
| 404 | pinctrl_bl: blgrp { |
| 405 | fsl,pins = < |
| 406 | /* BACKLINGE_EN */ |
| 407 | MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x83 |
| 408 | >; |
| 409 | }; |
| 410 | |
| 411 | pinctrl_bt: btgrp { |
| 412 | fsl,pins = < |
| 413 | /* BT_REG_ON */ |
| 414 | MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x83 |
| 415 | >; |
| 416 | }; |
| 417 | |
| 418 | pinctrl_camera_pwr: camerapwrgrp { |
| 419 | fsl,pins = < |
| 420 | /* CAMERA_PWR_EN_3V3 */ |
| 421 | MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x83 |
| 422 | >; |
| 423 | }; |
| 424 | |
| 425 | pinctrl_csi1: csi1grp { |
| 426 | fsl,pins = < |
| 427 | /* CSI1_NRST */ |
| 428 | MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25 0x83 |
| 429 | >; |
| 430 | }; |
| 431 | |
| 432 | pinctrl_charger_in: chargeringrp { |
| 433 | fsl,pins = < |
| 434 | /* CHRG_INT */ |
| 435 | MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80 |
| 436 | >; |
| 437 | }; |
| 438 | |
| 439 | pinctrl_dsibiasen: dsibiasengrp { |
| 440 | fsl,pins = < |
| 441 | /* DSI_BIAS_EN */ |
| 442 | MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20 0x83 |
| 443 | >; |
| 444 | }; |
| 445 | |
| 446 | pinctrl_dsien: dsiengrp { |
| 447 | fsl,pins = < |
| 448 | /* DSI_EN_3V3 */ |
| 449 | MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x83 |
| 450 | >; |
| 451 | }; |
| 452 | |
| 453 | pinctrl_dsirst: dsirstgrp { |
| 454 | fsl,pins = < |
| 455 | /* DSI_RST */ |
| 456 | MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x83 |
| 457 | /* DSI_TE */ |
| 458 | MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28 0x83 |
| 459 | /* TP_RST */ |
| 460 | MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x83 |
| 461 | >; |
| 462 | }; |
| 463 | |
| 464 | pinctrl_ecspi1: ecspigrp { |
| 465 | fsl,pins = < |
| 466 | MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83 |
| 467 | MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x83 |
| 468 | MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 |
| 469 | MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x83 |
| 470 | >; |
| 471 | }; |
| 472 | |
| 473 | pinctrl_gauge: gaugegrp { |
| 474 | fsl,pins = < |
| 475 | /* BAT_LOW */ |
| 476 | MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x80 |
| 477 | >; |
| 478 | }; |
| 479 | |
| 480 | pinctrl_gnsspwr: gnsspwrgrp { |
| 481 | fsl,pins = < |
| 482 | /* GPS3V3_EN */ |
| 483 | MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x83 |
| 484 | >; |
| 485 | }; |
| 486 | |
| 487 | pinctrl_haptic: hapticgrp { |
| 488 | fsl,pins = < |
| 489 | /* MOTO */ |
| 490 | MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x83 |
| 491 | >; |
| 492 | }; |
| 493 | |
| 494 | pinctrl_hp: hpgrp { |
| 495 | fsl,pins = < |
| 496 | /* HEADPHONE_DET_1V8 */ |
| 497 | MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x180 |
| 498 | >; |
| 499 | }; |
| 500 | |
| 501 | pinctrl_hub_pwr: hubpwrgrp { |
| 502 | fsl,pins = < |
| 503 | /* HUB_PWR_3V3_EN */ |
| 504 | MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x83 |
| 505 | >; |
| 506 | }; |
| 507 | |
| 508 | pinctrl_i2c1: i2c1grp { |
| 509 | fsl,pins = < |
| 510 | MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000026 |
| 511 | MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000026 |
| 512 | >; |
| 513 | }; |
| 514 | |
| 515 | pinctrl_i2c2: i2c2grp { |
| 516 | fsl,pins = < |
| 517 | MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000026 |
| 518 | MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000026 |
| 519 | >; |
| 520 | }; |
| 521 | |
| 522 | pinctrl_i2c3: i2c3grp { |
| 523 | fsl,pins = < |
| 524 | MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000026 |
| 525 | MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000026 |
| 526 | >; |
| 527 | }; |
| 528 | |
| 529 | pinctrl_i2c4: i2c4grp { |
| 530 | fsl,pins = < |
| 531 | MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000026 |
| 532 | MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000026 |
| 533 | >; |
| 534 | }; |
| 535 | |
| 536 | pinctrl_keys: keysgrp { |
| 537 | fsl,pins = < |
| 538 | /* VOL- */ |
| 539 | MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17 0x01C0 |
| 540 | /* VOL+ */ |
| 541 | MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16 0x01C0 |
| 542 | >; |
| 543 | }; |
| 544 | |
| 545 | pinctrl_led_b: ledbgrp { |
| 546 | fsl,pins = < |
| 547 | /* LED_B */ |
| 548 | MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x06 |
| 549 | >; |
| 550 | }; |
| 551 | |
| 552 | pinctrl_led_g: ledggrp { |
| 553 | fsl,pins = < |
| 554 | /* LED_G */ |
| 555 | MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT 0x06 |
| 556 | >; |
| 557 | }; |
| 558 | |
| 559 | pinctrl_led_r: ledrgrp { |
| 560 | fsl,pins = < |
| 561 | /* LED_R */ |
| 562 | MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT 0x06 |
| 563 | >; |
| 564 | }; |
| 565 | |
| 566 | pinctrl_mag: maggrp { |
| 567 | fsl,pins = < |
| 568 | /* INT_MAG */ |
| 569 | MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x80 |
| 570 | >; |
| 571 | }; |
| 572 | |
| 573 | pinctrl_pmic: pmicgrp { |
| 574 | fsl,pins = < |
| 575 | /* PMIC_NINT */ |
| 576 | MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x80 |
| 577 | >; |
| 578 | }; |
| 579 | |
| 580 | pinctrl_pmic_5v: pmic5vgrp { |
| 581 | fsl,pins = < |
| 582 | /* PMIC_5V */ |
| 583 | MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x80 |
| 584 | >; |
| 585 | }; |
| 586 | |
| 587 | pinctrl_prox: proxgrp { |
| 588 | fsl,pins = < |
| 589 | /* INT_LIGHT */ |
| 590 | MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x80 |
| 591 | >; |
| 592 | }; |
| 593 | |
| 594 | pinctrl_rtc: rtcgrp { |
| 595 | fsl,pins = < |
| 596 | /* RTC_INT */ |
| 597 | MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 |
| 598 | >; |
| 599 | }; |
| 600 | |
| 601 | pinctrl_sai2: sai2grp { |
| 602 | fsl,pins = < |
| 603 | MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 |
| 604 | MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 |
| 605 | MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 |
| 606 | MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 |
| 607 | MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 |
| 608 | >; |
| 609 | }; |
| 610 | |
| 611 | pinctrl_sai6: sai6grp { |
| 612 | fsl,pins = < |
| 613 | MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6 |
| 614 | MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6 |
| 615 | MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6 |
| 616 | MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6 |
| 617 | >; |
| 618 | }; |
| 619 | |
| 620 | pinctrl_tcpc: tcpcgrp { |
| 621 | fsl,pins = < |
| 622 | /* TCPC_INT */ |
| 623 | MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x01C0 |
| 624 | >; |
| 625 | }; |
| 626 | |
| 627 | pinctrl_touch: touchgrp { |
| 628 | fsl,pins = < |
| 629 | /* TP_INT */ |
| 630 | MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27 0x80 |
| 631 | >; |
| 632 | }; |
| 633 | |
| 634 | pinctrl_typec: typecgrp { |
| 635 | fsl,pins = < |
| 636 | /* TYPEC_MUX_EN */ |
| 637 | MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x83 |
| 638 | >; |
| 639 | }; |
| 640 | |
| 641 | pinctrl_uart1: uart1grp { |
| 642 | fsl,pins = < |
| 643 | MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 |
| 644 | MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 |
| 645 | >; |
| 646 | }; |
| 647 | |
| 648 | pinctrl_uart2: uart2grp { |
| 649 | fsl,pins = < |
| 650 | MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 |
| 651 | MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 |
| 652 | >; |
| 653 | }; |
| 654 | |
| 655 | pinctrl_uart3: uart3grp { |
| 656 | fsl,pins = < |
| 657 | MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 |
| 658 | MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 |
| 659 | >; |
| 660 | }; |
| 661 | |
| 662 | pinctrl_uart4: uart4grp { |
| 663 | fsl,pins = < |
| 664 | MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49 |
| 665 | MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49 |
| 666 | MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49 |
| 667 | MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49 |
| 668 | >; |
| 669 | }; |
| 670 | |
| 671 | pinctrl_usdhc1: usdhc1grp { |
| 672 | fsl,pins = < |
| 673 | MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 |
| 674 | MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 |
| 675 | MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 |
| 676 | MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 |
| 677 | MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 |
| 678 | MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 |
| 679 | MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 |
| 680 | MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 |
| 681 | MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 |
| 682 | MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 |
| 683 | MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 |
| 684 | MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| 685 | >; |
| 686 | }; |
| 687 | |
| 688 | pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { |
| 689 | fsl,pins = < |
| 690 | MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d |
| 691 | MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd |
| 692 | MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd |
| 693 | MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd |
| 694 | MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd |
| 695 | MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd |
| 696 | MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd |
| 697 | MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd |
| 698 | MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd |
| 699 | MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd |
| 700 | MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d |
| 701 | MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| 702 | >; |
| 703 | }; |
| 704 | |
| 705 | pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { |
| 706 | fsl,pins = < |
| 707 | MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f |
| 708 | MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf |
| 709 | MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf |
| 710 | MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf |
| 711 | MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf |
| 712 | MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf |
| 713 | MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf |
| 714 | MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf |
| 715 | MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf |
| 716 | MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf |
| 717 | MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f |
| 718 | MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| 719 | >; |
| 720 | }; |
| 721 | |
| 722 | pinctrl_usdhc2: usdhc2grp { |
| 723 | fsl,pins = < |
| 724 | MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 |
| 725 | MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 |
| 726 | MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 |
| 727 | MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 |
| 728 | MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 |
| 729 | MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 |
| 730 | MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 |
| 731 | MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 |
| 732 | >; |
| 733 | }; |
| 734 | |
| 735 | pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| 736 | fsl,pins = < |
| 737 | MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 |
| 738 | MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d |
| 739 | MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd |
| 740 | MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd |
| 741 | MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd |
| 742 | MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd |
| 743 | MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd |
| 744 | MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 |
| 745 | >; |
| 746 | }; |
| 747 | |
| 748 | pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| 749 | fsl,pins = < |
| 750 | MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 |
| 751 | MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f |
| 752 | MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf |
| 753 | MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf |
| 754 | MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf |
| 755 | MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf |
| 756 | MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf |
| 757 | MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 |
| 758 | >; |
| 759 | }; |
| 760 | |
| 761 | pinctrl_wifi_disable: wifidisablegrp { |
| 762 | fsl,pins = < |
| 763 | /* WIFI_REG_ON */ |
| 764 | MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x83 |
| 765 | >; |
| 766 | }; |
| 767 | |
| 768 | pinctrl_wifi_pwr: wifipwrgrp { |
| 769 | fsl,pins = < |
| 770 | /* WIFI3V3_EN */ |
| 771 | MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x83 |
| 772 | >; |
| 773 | }; |
| 774 | |
| 775 | pinctrl_wdog: wdoggrp { |
| 776 | fsl,pins = < |
| 777 | /* nWDOG */ |
| 778 | MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x1f |
| 779 | >; |
| 780 | }; |
| 781 | }; |
| 782 | |
| 783 | &i2c1 { |
| 784 | clock-frequency = <384000>; |
| 785 | pinctrl-names = "default"; |
| 786 | pinctrl-0 = <&pinctrl_i2c1>; |
| 787 | status = "okay"; |
| 788 | |
| 789 | typec_pd: usb-pd@3f { |
| 790 | compatible = "ti,tps6598x"; |
| 791 | reg = <0x3f>; |
| 792 | pinctrl-names = "default"; |
| 793 | pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>; |
| 794 | interrupt-parent = <&gpio1>; |
| 795 | interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
| 796 | interrupt-names = "irq"; |
| 797 | extcon = <&usb3_phy0>; |
| 798 | wakeup-source; |
| 799 | |
| 800 | connector { |
| 801 | compatible = "usb-c-connector"; |
| 802 | label = "USB-C"; |
| 803 | data-role = "dual"; |
| 804 | |
| 805 | ports { |
| 806 | #address-cells = <1>; |
| 807 | #size-cells = <0>; |
| 808 | |
| 809 | port@0 { |
| 810 | reg = <0>; |
| 811 | |
| 812 | usb_con_hs: endpoint { |
| 813 | remote-endpoint = <&typec_hs>; |
| 814 | }; |
| 815 | }; |
| 816 | |
| 817 | port@1 { |
| 818 | reg = <1>; |
| 819 | |
| 820 | usb_con_ss: endpoint { |
| 821 | remote-endpoint = <&typec_ss>; |
| 822 | }; |
| 823 | }; |
| 824 | }; |
| 825 | }; |
| 826 | }; |
| 827 | |
| 828 | pmic: pmic@4b { |
| 829 | compatible = "rohm,bd71837"; |
| 830 | reg = <0x4b>; |
| 831 | pinctrl-names = "default"; |
| 832 | pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>; |
| 833 | clocks = <&pmic_osc>; |
| 834 | #clock-cells = <0>; |
| 835 | clock-names = "osc"; |
| 836 | clock-output-names = "pmic_clk"; |
| 837 | interrupt-parent = <&gpio1>; |
| 838 | interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| 839 | rohm,reset-snvs-powered; |
| 840 | |
| 841 | regulators { |
| 842 | buck1_reg: BUCK1 { |
| 843 | regulator-name = "buck1"; |
| 844 | regulator-min-microvolt = <700000>; |
| 845 | regulator-max-microvolt = <1300000>; |
| 846 | regulator-boot-on; |
| 847 | regulator-ramp-delay = <1250>; |
| 848 | rohm,dvs-run-voltage = <880000>; |
| 849 | rohm,dvs-idle-voltage = <820000>; |
| 850 | rohm,dvs-suspend-voltage = <810000>; |
| 851 | regulator-always-on; |
| 852 | }; |
| 853 | |
| 854 | buck2_reg: BUCK2 { |
| 855 | regulator-name = "buck2"; |
| 856 | regulator-min-microvolt = <700000>; |
| 857 | regulator-max-microvolt = <1300000>; |
| 858 | regulator-boot-on; |
| 859 | regulator-ramp-delay = <1250>; |
| 860 | rohm,dvs-run-voltage = <950000>; |
| 861 | rohm,dvs-idle-voltage = <850000>; |
| 862 | regulator-always-on; |
| 863 | }; |
| 864 | |
| 865 | buck3_reg: BUCK3 { |
| 866 | regulator-name = "buck3"; |
| 867 | regulator-min-microvolt = <700000>; |
| 868 | regulator-max-microvolt = <1300000>; |
| 869 | regulator-boot-on; |
| 870 | rohm,dvs-run-voltage = <850000>; |
| 871 | }; |
| 872 | |
| 873 | buck4_reg: BUCK4 { |
| 874 | regulator-name = "buck4"; |
| 875 | regulator-min-microvolt = <700000>; |
| 876 | regulator-max-microvolt = <1300000>; |
| 877 | rohm,dvs-run-voltage = <930000>; |
| 878 | }; |
| 879 | |
| 880 | buck5_reg: BUCK5 { |
| 881 | regulator-name = "buck5"; |
| 882 | regulator-min-microvolt = <700000>; |
| 883 | regulator-max-microvolt = <1350000>; |
| 884 | regulator-boot-on; |
| 885 | regulator-always-on; |
| 886 | }; |
| 887 | |
| 888 | buck6_reg: BUCK6 { |
| 889 | regulator-name = "buck6"; |
| 890 | regulator-min-microvolt = <3000000>; |
| 891 | regulator-max-microvolt = <3300000>; |
| 892 | regulator-boot-on; |
| 893 | regulator-always-on; |
| 894 | }; |
| 895 | |
| 896 | buck7_reg: BUCK7 { |
| 897 | regulator-name = "buck7"; |
| 898 | regulator-min-microvolt = <1605000>; |
| 899 | regulator-max-microvolt = <1995000>; |
| 900 | regulator-boot-on; |
| 901 | regulator-always-on; |
| 902 | }; |
| 903 | |
| 904 | buck8_reg: BUCK8 { |
| 905 | regulator-name = "buck8"; |
| 906 | regulator-min-microvolt = <800000>; |
| 907 | regulator-max-microvolt = <1400000>; |
| 908 | regulator-boot-on; |
| 909 | regulator-always-on; |
| 910 | }; |
| 911 | |
| 912 | ldo1_reg: LDO1 { |
| 913 | regulator-name = "ldo1"; |
| 914 | regulator-min-microvolt = <3000000>; |
| 915 | regulator-max-microvolt = <3300000>; |
| 916 | regulator-boot-on; |
| 917 | /* leave on for snvs power button */ |
| 918 | regulator-always-on; |
| 919 | }; |
| 920 | |
| 921 | ldo2_reg: LDO2 { |
| 922 | regulator-name = "ldo2"; |
| 923 | regulator-min-microvolt = <900000>; |
| 924 | regulator-max-microvolt = <900000>; |
| 925 | regulator-boot-on; |
| 926 | /* leave on for snvs power button */ |
| 927 | regulator-always-on; |
| 928 | }; |
| 929 | |
| 930 | ldo3_reg: LDO3 { |
| 931 | regulator-name = "ldo3"; |
| 932 | regulator-min-microvolt = <1800000>; |
| 933 | regulator-max-microvolt = <3300000>; |
| 934 | regulator-boot-on; |
| 935 | regulator-always-on; |
| 936 | }; |
| 937 | |
| 938 | ldo4_reg: LDO4 { |
| 939 | regulator-name = "ldo4"; |
| 940 | regulator-min-microvolt = <900000>; |
| 941 | regulator-max-microvolt = <1800000>; |
| 942 | regulator-boot-on; |
| 943 | regulator-always-on; |
| 944 | }; |
| 945 | |
| 946 | ldo5_reg: LDO5 { |
| 947 | /* VDD_PHY_0V9 - MIPI and HDMI domains */ |
| 948 | regulator-name = "ldo5"; |
| 949 | regulator-min-microvolt = <1800000>; |
| 950 | regulator-max-microvolt = <3300000>; |
| 951 | regulator-always-on; |
| 952 | }; |
| 953 | |
| 954 | ldo6_reg: LDO6 { |
| 955 | /* VDD_PHY_0V9 - MIPI, HDMI and USB domains */ |
| 956 | regulator-name = "ldo6"; |
| 957 | regulator-min-microvolt = <900000>; |
| 958 | regulator-max-microvolt = <1800000>; |
| 959 | regulator-boot-on; |
| 960 | regulator-always-on; |
| 961 | }; |
| 962 | |
| 963 | ldo7_reg: LDO7 { |
| 964 | /* VDD_PHY_3V3 - USB domain */ |
| 965 | regulator-name = "ldo7"; |
| 966 | regulator-min-microvolt = <1800000>; |
| 967 | regulator-max-microvolt = <3300000>; |
| 968 | regulator-boot-on; |
| 969 | regulator-always-on; |
| 970 | }; |
| 971 | }; |
| 972 | }; |
| 973 | |
| 974 | rtc@68 { |
| 975 | compatible = "microcrystal,rv4162"; |
| 976 | reg = <0x68>; |
| 977 | pinctrl-names = "default"; |
| 978 | pinctrl-0 = <&pinctrl_rtc>; |
| 979 | interrupt-parent = <&gpio1>; |
| 980 | interrupts = <9 IRQ_TYPE_LEVEL_LOW>; |
| 981 | }; |
| 982 | }; |
| 983 | |
| 984 | &i2c2 { |
| 985 | clock-frequency = <384000>; |
| 986 | pinctrl-names = "default"; |
| 987 | pinctrl-0 = <&pinctrl_i2c2>; |
| 988 | status = "okay"; |
| 989 | |
| 990 | magnetometer: magnetometer@1e { |
| 991 | compatible = "st,lsm9ds1-magn"; |
| 992 | reg = <0x1e>; |
| 993 | pinctrl-names = "default"; |
| 994 | pinctrl-0 = <&pinctrl_mag>; |
| 995 | interrupt-parent = <&gpio3>; |
| 996 | interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; |
| 997 | vdd-supply = <®_vdd_sen>; |
| 998 | vddio-supply = <®_vdd_1v8>; |
| 999 | }; |
| 1000 | |
| 1001 | regulator@3e { |
| 1002 | compatible = "ti,tps65132"; |
| 1003 | reg = <0x3e>; |
| 1004 | |
| 1005 | reg_lcd_avdd: outp { |
| 1006 | regulator-name = "LCD_AVDD"; |
| 1007 | vin-supply = <®_lcd_3v4>; |
| 1008 | }; |
| 1009 | |
| 1010 | reg_lcd_avee: outn { |
| 1011 | regulator-name = "LCD_AVEE"; |
| 1012 | vin-supply = <®_lcd_3v4>; |
| 1013 | }; |
| 1014 | }; |
| 1015 | |
| 1016 | proximity: prox@60 { |
| 1017 | compatible = "vishay,vcnl4040"; |
| 1018 | reg = <0x60>; |
| 1019 | pinctrl-names = "default"; |
| 1020 | pinctrl-0 = <&pinctrl_prox>; |
| 1021 | interrupt-parent = <&gpio3>; |
| 1022 | interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| 1023 | }; |
| 1024 | |
| 1025 | accel_gyro: accel-gyro@6a { |
| 1026 | compatible = "st,lsm9ds1-imu"; |
| 1027 | reg = <0x6a>; |
| 1028 | vdd-supply = <®_vdd_sen>; |
| 1029 | vddio-supply = <®_vdd_1v8>; |
| 1030 | }; |
| 1031 | }; |
| 1032 | |
| 1033 | &i2c3 { |
| 1034 | clock-frequency = <384000>; |
| 1035 | pinctrl-names = "default"; |
| 1036 | pinctrl-0 = <&pinctrl_i2c3>; |
| 1037 | status = "okay"; |
| 1038 | |
| 1039 | codec: audio-codec@1a { |
| 1040 | compatible = "wlf,wm8962"; |
| 1041 | reg = <0x1a>; |
| 1042 | clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; |
| 1043 | assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; |
| 1044 | assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| 1045 | assigned-clock-rates = <24576000>; |
| 1046 | #sound-dai-cells = <0>; |
| 1047 | mic-cfg = <0x200>; |
| 1048 | DCVDD-supply = <®_aud_1v8>; |
| 1049 | DBVDD-supply = <®_aud_1v8>; |
| 1050 | AVDD-supply = <®_aud_1v8>; |
| 1051 | CPVDD-supply = <®_aud_1v8>; |
| 1052 | MICVDD-supply = <®_mic_2v4>; |
| 1053 | PLLVDD-supply = <®_aud_1v8>; |
| 1054 | SPKVDD1-supply = <®_vsys_3v4>; |
| 1055 | SPKVDD2-supply = <®_vsys_3v4>; |
| 1056 | gpio-cfg = < |
| 1057 | 0x0000 /* n/c */ |
| 1058 | 0x0001 /* gpio2, 1: default */ |
| 1059 | 0x0013 /* gpio3, 2: dmicclk */ |
| 1060 | 0x0000 /* n/c, 3: default */ |
| 1061 | 0x8014 /* gpio5, 4: dmic_dat */ |
| 1062 | 0x0000 /* gpio6, 5: default */ |
| 1063 | >; |
| 1064 | }; |
| 1065 | |
| 1066 | camera_front: camera@20 { |
| 1067 | compatible = "hynix,hi846"; |
| 1068 | reg = <0x20>; |
| 1069 | pinctrl-names = "default"; |
| 1070 | pinctrl-0 = <&pinctrl_csi1>; |
| 1071 | clocks = <&clk IMX8MQ_CLK_CLKO2>; |
| 1072 | assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>; |
| 1073 | assigned-clock-rates = <25000000>; |
| 1074 | reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| 1075 | vdda-supply = <®_vcam_2v8>; |
| 1076 | vddd-supply = <®_vcam_1v2>; |
| 1077 | vddio-supply = <®_csi_1v8>; |
| 1078 | rotation = <90>; |
| 1079 | orientation = <0>; |
| 1080 | |
| 1081 | port { |
| 1082 | camera1_ep: endpoint { |
| 1083 | data-lanes = <1 2>; |
| 1084 | link-frequencies = /bits/ 64 |
| 1085 | <80000000 200000000 300000000>; |
| 1086 | remote-endpoint = <&mipi1_sensor_ep>; |
| 1087 | }; |
| 1088 | }; |
| 1089 | }; |
| 1090 | |
| 1091 | backlight@36 { |
| 1092 | compatible = "ti,lm36922"; |
| 1093 | reg = <0x36>; |
| 1094 | pinctrl-names = "default"; |
| 1095 | pinctrl-0 = <&pinctrl_bl>; |
| 1096 | #address-cells = <1>; |
| 1097 | #size-cells = <0>; |
| 1098 | enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; |
| 1099 | vled-supply = <®_vsys_3v4>; |
| 1100 | ti,ovp-microvolt = <25000000>; |
| 1101 | |
| 1102 | led_backlight: led@0 { |
| 1103 | reg = <0>; |
| 1104 | label = ":backlight"; |
| 1105 | linux,default-trigger = "backlight"; |
| 1106 | led-max-microamp = <20000>; |
| 1107 | }; |
| 1108 | }; |
| 1109 | |
| 1110 | touchscreen@38 { |
| 1111 | compatible = "edt,edt-ft5506"; |
| 1112 | reg = <0x38>; |
| 1113 | pinctrl-names = "default"; |
| 1114 | pinctrl-0 = <&pinctrl_touch>; |
| 1115 | interrupt-parent = <&gpio1>; |
| 1116 | interrupts = <27 IRQ_TYPE_EDGE_FALLING>; |
| 1117 | touchscreen-size-x = <720>; |
| 1118 | touchscreen-size-y = <1440>; |
| 1119 | vcc-supply = <®_lcd_1v8>; |
| 1120 | }; |
| 1121 | }; |
| 1122 | |
| 1123 | &i2c4 { |
| 1124 | clock-frequency = <384000>; |
| 1125 | pinctrl-names = "default"; |
| 1126 | pinctrl-0 = <&pinctrl_i2c4>; |
| 1127 | status = "okay"; |
| 1128 | |
| 1129 | vcm@c { |
| 1130 | compatible = "dongwoon,dw9714"; |
| 1131 | reg = <0x0c>; |
| 1132 | vcc-supply = <®_csi_1v8>; |
| 1133 | }; |
| 1134 | |
| 1135 | bat: fuel-gauge@36 { |
| 1136 | compatible = "maxim,max17055"; |
| 1137 | reg = <0x36>; |
| 1138 | interrupt-parent = <&gpio3>; |
| 1139 | interrupts = <20 IRQ_TYPE_LEVEL_LOW>; |
| 1140 | pinctrl-names = "default"; |
| 1141 | pinctrl-0 = <&pinctrl_gauge>; |
| 1142 | power-supplies = <&bq25895>; |
| 1143 | maxim,over-heat-temp = <700>; |
| 1144 | maxim,over-volt = <4500>; |
| 1145 | maxim,rsns-microohm = <5000>; |
| 1146 | }; |
| 1147 | |
| 1148 | bq25895: charger@6a { |
| 1149 | compatible = "ti,bq25895", "ti,bq25890"; |
| 1150 | reg = <0x6a>; |
| 1151 | pinctrl-names = "default"; |
| 1152 | pinctrl-0 = <&pinctrl_charger_in>; |
| 1153 | interrupt-parent = <&gpio3>; |
| 1154 | interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
| 1155 | ti,battery-regulation-voltage = <4208000>; /* uV */ |
| 1156 | ti,termination-current = <128000>; /* uA */ |
| 1157 | ti,precharge-current = <128000>; /* uA */ |
| 1158 | ti,minimum-sys-voltage = <3700000>; /* uV */ |
| 1159 | ti,boost-voltage = <5000000>; /* uV */ |
| 1160 | ti,boost-max-current = <1500000>; /* uA */ |
| 1161 | monitored-battery = <&bat>; |
| 1162 | power-supplies = <&typec_pd>; |
| 1163 | }; |
| 1164 | }; |
| 1165 | |
| 1166 | &lcdif { |
| 1167 | status = "okay"; |
| 1168 | }; |
| 1169 | |
| 1170 | &mipi_csi1 { |
| 1171 | assigned-clock-rates = <266000000>, <200000000>, <66000000>; |
| 1172 | status = "okay"; |
| 1173 | |
| 1174 | ports { |
| 1175 | port@0 { |
| 1176 | reg = <0>; |
| 1177 | |
| 1178 | mipi1_sensor_ep: endpoint { |
| 1179 | remote-endpoint = <&camera1_ep>; |
| 1180 | data-lanes = <1 2>; |
| 1181 | }; |
| 1182 | }; |
| 1183 | }; |
| 1184 | }; |
| 1185 | |
| 1186 | &mipi_dsi { |
| 1187 | #address-cells = <1>; |
| 1188 | #size-cells = <0>; |
| 1189 | status = "okay"; |
| 1190 | |
| 1191 | lcd_panel: panel@0 { |
| 1192 | compatible = "mantix,mlaf057we51-x"; |
| 1193 | reg = <0>; |
| 1194 | pinctrl-names = "default"; |
| 1195 | pinctrl-0 = <&pinctrl_dsirst>; |
| 1196 | avdd-supply = <®_lcd_avdd>; |
| 1197 | avee-supply = <®_lcd_avee>; |
| 1198 | vddi-supply = <®_lcd_1v8>; |
| 1199 | backlight = <&backlight_dsi>; |
| 1200 | reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; |
| 1201 | mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; |
| 1202 | |
| 1203 | port { |
| 1204 | panel_in: endpoint { |
| 1205 | remote-endpoint = <&mipi_dsi_out>; |
| 1206 | }; |
| 1207 | }; |
| 1208 | }; |
| 1209 | |
| 1210 | ports { |
| 1211 | port@1 { |
| 1212 | reg = <1>; |
| 1213 | |
| 1214 | mipi_dsi_out: endpoint { |
| 1215 | remote-endpoint = <&panel_in>; |
| 1216 | }; |
| 1217 | }; |
| 1218 | }; |
| 1219 | }; |
| 1220 | |
| 1221 | &pgc_gpu { |
| 1222 | power-supply = <&buck3_reg>; |
| 1223 | }; |
| 1224 | |
| 1225 | &pgc_mipi { |
| 1226 | power-supply = <&ldo5_reg>; |
| 1227 | }; |
| 1228 | |
| 1229 | &pgc_vpu { |
| 1230 | power-supply = <&buck4_reg>; |
| 1231 | }; |
| 1232 | |
| 1233 | &pwm1 { |
| 1234 | pinctrl-names = "default"; |
| 1235 | pinctrl-0 = <&pinctrl_haptic>; |
| 1236 | status = "okay"; |
| 1237 | }; |
| 1238 | |
| 1239 | &pwm2 { |
| 1240 | pinctrl-names = "default"; |
| 1241 | pinctrl-0 = <&pinctrl_led_b>; |
| 1242 | status = "okay"; |
| 1243 | }; |
| 1244 | |
| 1245 | &pwm3 { |
| 1246 | pinctrl-names = "default"; |
| 1247 | pinctrl-0 = <&pinctrl_led_r>; |
| 1248 | status = "okay"; |
| 1249 | }; |
| 1250 | |
| 1251 | &pwm4 { |
| 1252 | pinctrl-names = "default"; |
| 1253 | pinctrl-0 = <&pinctrl_led_g>; |
| 1254 | status = "okay"; |
| 1255 | }; |
| 1256 | |
| 1257 | &sai2 { |
| 1258 | pinctrl-names = "default"; |
| 1259 | pinctrl-0 = <&pinctrl_sai2>; |
| 1260 | assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; |
| 1261 | assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| 1262 | assigned-clock-rates = <24576000>; |
| 1263 | status = "okay"; |
| 1264 | }; |
| 1265 | |
| 1266 | &sai6 { |
| 1267 | pinctrl-names = "default"; |
| 1268 | pinctrl-0 = <&pinctrl_sai6>; |
| 1269 | assigned-clocks = <&clk IMX8MQ_CLK_SAI6>; |
| 1270 | assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| 1271 | assigned-clock-rates = <24576000>; |
| 1272 | fsl,sai-synchronous-rx; |
| 1273 | status = "okay"; |
| 1274 | }; |
| 1275 | |
| 1276 | &snvs_pwrkey { |
| 1277 | status = "okay"; |
| 1278 | }; |
| 1279 | |
| 1280 | &snvs_rtc { |
| 1281 | status = "disabled"; |
| 1282 | }; |
| 1283 | |
| 1284 | &uart1 { /* console */ |
| 1285 | pinctrl-names = "default"; |
| 1286 | pinctrl-0 = <&pinctrl_uart1>; |
| 1287 | status = "okay"; |
| 1288 | }; |
| 1289 | |
| 1290 | &uart2 { /* TPS - GPS - DEBUG */ |
| 1291 | pinctrl-names = "default"; |
| 1292 | pinctrl-0 = <&pinctrl_uart2>; |
| 1293 | status = "okay"; |
| 1294 | |
| 1295 | gnss { |
| 1296 | compatible = "globaltop,pa6h"; |
| 1297 | vcc-supply = <®_gnss>; |
| 1298 | current-speed = <9600>; |
| 1299 | }; |
| 1300 | }; |
| 1301 | |
| 1302 | &uart3 { /* SMC */ |
| 1303 | pinctrl-names = "default"; |
| 1304 | pinctrl-0 = <&pinctrl_uart3>; |
| 1305 | status = "okay"; |
| 1306 | }; |
| 1307 | |
| 1308 | &uart4 { /* BT */ |
| 1309 | pinctrl-names = "default"; |
| 1310 | pinctrl-0 = <&pinctrl_uart4>; |
| 1311 | uart-has-rtscts; |
| 1312 | status = "okay"; |
| 1313 | }; |
| 1314 | |
| 1315 | &usb3_phy0 { |
| 1316 | status = "okay"; |
| 1317 | }; |
| 1318 | |
| 1319 | &usb3_phy1 { |
| 1320 | vbus-supply = <®_hub>; |
| 1321 | status = "okay"; |
| 1322 | }; |
| 1323 | |
| 1324 | &usb_dwc3_0 { |
| 1325 | #address-cells = <1>; |
| 1326 | #size-cells = <0>; |
| 1327 | dr_mode = "otg"; |
| 1328 | usb-role-switch; |
| 1329 | status = "okay"; |
| 1330 | |
| 1331 | port@0 { |
| 1332 | reg = <0>; |
| 1333 | |
| 1334 | typec_hs: endpoint { |
| 1335 | remote-endpoint = <&usb_con_hs>; |
| 1336 | }; |
| 1337 | }; |
| 1338 | |
| 1339 | port@1 { |
| 1340 | reg = <1>; |
| 1341 | |
| 1342 | typec_ss: endpoint { |
| 1343 | remote-endpoint = <&usb_con_ss>; |
| 1344 | }; |
| 1345 | }; |
| 1346 | }; |
| 1347 | |
| 1348 | &usb_dwc3_1 { |
| 1349 | dr_mode = "host"; |
| 1350 | status = "okay"; |
| 1351 | #address-cells = <1>; |
| 1352 | #size-cells = <0>; |
| 1353 | |
| 1354 | /* Microchip USB2642 */ |
| 1355 | hub@1 { |
| 1356 | compatible = "usb424,2640"; |
| 1357 | reg = <1>; |
| 1358 | #address-cells = <1>; |
| 1359 | #size-cells = <0>; |
| 1360 | |
| 1361 | mass-storage@1 { |
| 1362 | compatible = "usb424,4041"; |
| 1363 | reg = <1>; |
| 1364 | }; |
| 1365 | }; |
| 1366 | }; |
| 1367 | |
| 1368 | &usdhc1 { |
| 1369 | assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; |
| 1370 | assigned-clock-rates = <400000000>; |
| 1371 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 1372 | pinctrl-0 = <&pinctrl_usdhc1>; |
| 1373 | pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| 1374 | pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| 1375 | bus-width = <8>; |
| 1376 | vmmc-supply = <®_vdd_3v3>; |
| 1377 | vqmmc-supply = <®_vdd_1v8>; |
| 1378 | non-removable; |
| 1379 | status = "okay"; |
| 1380 | }; |
| 1381 | |
| 1382 | &usdhc2 { |
| 1383 | assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; |
| 1384 | assigned-clock-rates = <200000000>; |
| 1385 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 1386 | pinctrl-0 = <&pinctrl_usdhc2>; |
| 1387 | pinctrl-1 = <&pinctrl_usdhc2_100mhz>; |
| 1388 | pinctrl-2 = <&pinctrl_usdhc2_200mhz>; |
| 1389 | bus-width = <4>; |
| 1390 | vmmc-supply = <®_wifi_3v3>; |
| 1391 | mmc-pwrseq = <&usdhc2_pwrseq>; |
| 1392 | post-power-on-delay-ms = <20>; |
| 1393 | cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| 1394 | max-frequency = <100000000>; |
| 1395 | disable-wp; |
| 1396 | cap-sdio-irq; |
| 1397 | keep-power-in-suspend; |
| 1398 | wakeup-source; |
| 1399 | status = "okay"; |
| 1400 | }; |
| 1401 | |
| 1402 | &wdog1 { |
| 1403 | pinctrl-names = "default"; |
| 1404 | pinctrl-0 = <&pinctrl_wdog>; |
| 1405 | fsl,ext-reset-output; |
| 1406 | status = "okay"; |
| 1407 | }; |
| 1408 | |
| 1409 | &a53_opp_table { |
| 1410 | opp-1000000000 { |
| 1411 | opp-microvolt = <850000>; |
| 1412 | }; |
| 1413 | |
| 1414 | opp-1500000000 { |
| 1415 | opp-microvolt = <950000>; |
| 1416 | }; |
| 1417 | }; |