Fabrice Gasnier | 5a1da38 | 2018-07-24 16:31:31 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2018, STMicroelectronics - All Rights Reserved |
| 4 | * Author: Fabrice Gasnier <fabrice.gasnier@st.com> |
| 5 | * |
| 6 | * Originally based on the Linux kernel v4.18 drivers/iio/adc/stm32-adc.c. |
| 7 | */ |
| 8 | |
| 9 | #include <common.h> |
| 10 | #include <adc.h> |
| 11 | #include <asm/io.h> |
Simon Glass | 9bc1564 | 2020-02-03 07:36:16 -0700 | [diff] [blame] | 12 | #include <dm/device_compat.h> |
Fabrice Gasnier | 5a1da38 | 2018-07-24 16:31:31 +0200 | [diff] [blame] | 13 | #include <linux/iopoll.h> |
| 14 | #include "stm32-adc-core.h" |
| 15 | |
| 16 | /* STM32H7 - Registers for each ADC instance */ |
| 17 | #define STM32H7_ADC_ISR 0x00 |
| 18 | #define STM32H7_ADC_CR 0x08 |
| 19 | #define STM32H7_ADC_CFGR 0x0C |
| 20 | #define STM32H7_ADC_SMPR1 0x14 |
| 21 | #define STM32H7_ADC_SMPR2 0x18 |
| 22 | #define STM32H7_ADC_PCSEL 0x1C |
| 23 | #define STM32H7_ADC_SQR1 0x30 |
| 24 | #define STM32H7_ADC_DR 0x40 |
| 25 | #define STM32H7_ADC_DIFSEL 0xC0 |
| 26 | |
| 27 | /* STM32H7_ADC_ISR - bit fields */ |
| 28 | #define STM32MP1_VREGREADY BIT(12) |
| 29 | #define STM32H7_EOC BIT(2) |
| 30 | #define STM32H7_ADRDY BIT(0) |
| 31 | |
| 32 | /* STM32H7_ADC_CR - bit fields */ |
| 33 | #define STM32H7_DEEPPWD BIT(29) |
| 34 | #define STM32H7_ADVREGEN BIT(28) |
| 35 | #define STM32H7_BOOST BIT(8) |
| 36 | #define STM32H7_ADSTART BIT(2) |
| 37 | #define STM32H7_ADDIS BIT(1) |
| 38 | #define STM32H7_ADEN BIT(0) |
| 39 | |
| 40 | /* STM32H7_ADC_CFGR bit fields */ |
| 41 | #define STM32H7_EXTEN GENMASK(11, 10) |
| 42 | #define STM32H7_DMNGT GENMASK(1, 0) |
| 43 | |
| 44 | /* STM32H7_ADC_SQR1 - bit fields */ |
| 45 | #define STM32H7_SQ1_SHIFT 6 |
| 46 | |
| 47 | /* BOOST bit must be set on STM32H7 when ADC clock is above 20MHz */ |
| 48 | #define STM32H7_BOOST_CLKRATE 20000000UL |
| 49 | |
| 50 | #define STM32_ADC_CH_MAX 20 /* max number of channels */ |
| 51 | #define STM32_ADC_TIMEOUT_US 100000 |
| 52 | |
| 53 | struct stm32_adc_cfg { |
| 54 | unsigned int max_channels; |
| 55 | unsigned int num_bits; |
| 56 | bool has_vregready; |
| 57 | }; |
| 58 | |
| 59 | struct stm32_adc { |
| 60 | void __iomem *regs; |
| 61 | int active_channel; |
| 62 | const struct stm32_adc_cfg *cfg; |
| 63 | }; |
| 64 | |
| 65 | static int stm32_adc_stop(struct udevice *dev) |
| 66 | { |
| 67 | struct stm32_adc *adc = dev_get_priv(dev); |
| 68 | |
| 69 | setbits_le32(adc->regs + STM32H7_ADC_CR, STM32H7_ADDIS); |
| 70 | clrbits_le32(adc->regs + STM32H7_ADC_CR, STM32H7_BOOST); |
| 71 | /* Setting DEEPPWD disables ADC vreg and clears ADVREGEN */ |
| 72 | setbits_le32(adc->regs + STM32H7_ADC_CR, STM32H7_DEEPPWD); |
| 73 | adc->active_channel = -1; |
| 74 | |
| 75 | return 0; |
| 76 | } |
| 77 | |
| 78 | static int stm32_adc_start_channel(struct udevice *dev, int channel) |
| 79 | { |
| 80 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 81 | struct stm32_adc_common *common = dev_get_priv(dev_get_parent(dev)); |
| 82 | struct stm32_adc *adc = dev_get_priv(dev); |
| 83 | int ret; |
| 84 | u32 val; |
| 85 | |
| 86 | /* Exit deep power down, then enable ADC voltage regulator */ |
| 87 | clrbits_le32(adc->regs + STM32H7_ADC_CR, STM32H7_DEEPPWD); |
| 88 | setbits_le32(adc->regs + STM32H7_ADC_CR, STM32H7_ADVREGEN); |
| 89 | if (common->rate > STM32H7_BOOST_CLKRATE) |
| 90 | setbits_le32(adc->regs + STM32H7_ADC_CR, STM32H7_BOOST); |
| 91 | |
| 92 | /* Wait for startup time */ |
| 93 | if (!adc->cfg->has_vregready) { |
| 94 | udelay(20); |
| 95 | } else { |
| 96 | ret = readl_poll_timeout(adc->regs + STM32H7_ADC_ISR, val, |
| 97 | val & STM32MP1_VREGREADY, |
| 98 | STM32_ADC_TIMEOUT_US); |
| 99 | if (ret < 0) { |
| 100 | stm32_adc_stop(dev); |
| 101 | dev_err(dev, "Failed to enable vreg: %d\n", ret); |
| 102 | return ret; |
| 103 | } |
| 104 | } |
| 105 | |
| 106 | /* Only use single ended channels */ |
| 107 | writel(0, adc->regs + STM32H7_ADC_DIFSEL); |
| 108 | |
| 109 | /* Enable ADC, Poll for ADRDY to be set (after adc startup time) */ |
| 110 | setbits_le32(adc->regs + STM32H7_ADC_CR, STM32H7_ADEN); |
| 111 | ret = readl_poll_timeout(adc->regs + STM32H7_ADC_ISR, val, |
| 112 | val & STM32H7_ADRDY, STM32_ADC_TIMEOUT_US); |
| 113 | if (ret < 0) { |
| 114 | stm32_adc_stop(dev); |
| 115 | dev_err(dev, "Failed to enable ADC: %d\n", ret); |
| 116 | return ret; |
| 117 | } |
| 118 | |
| 119 | /* Preselect channels */ |
| 120 | writel(uc_pdata->channel_mask, adc->regs + STM32H7_ADC_PCSEL); |
| 121 | |
| 122 | /* Set sampling time to max value by default */ |
| 123 | writel(0xffffffff, adc->regs + STM32H7_ADC_SMPR1); |
| 124 | writel(0xffffffff, adc->regs + STM32H7_ADC_SMPR2); |
| 125 | |
| 126 | /* Program regular sequence: chan in SQ1 & len = 0 for one channel */ |
| 127 | writel(channel << STM32H7_SQ1_SHIFT, adc->regs + STM32H7_ADC_SQR1); |
| 128 | |
| 129 | /* Trigger detection disabled (conversion can be launched in SW) */ |
| 130 | clrbits_le32(adc->regs + STM32H7_ADC_CFGR, STM32H7_EXTEN | |
| 131 | STM32H7_DMNGT); |
| 132 | adc->active_channel = channel; |
| 133 | |
| 134 | return 0; |
| 135 | } |
| 136 | |
| 137 | static int stm32_adc_channel_data(struct udevice *dev, int channel, |
| 138 | unsigned int *data) |
| 139 | { |
| 140 | struct stm32_adc *adc = dev_get_priv(dev); |
| 141 | int ret; |
| 142 | u32 val; |
| 143 | |
| 144 | if (channel != adc->active_channel) { |
| 145 | dev_err(dev, "Requested channel is not active!\n"); |
| 146 | return -EINVAL; |
| 147 | } |
| 148 | |
| 149 | setbits_le32(adc->regs + STM32H7_ADC_CR, STM32H7_ADSTART); |
| 150 | ret = readl_poll_timeout(adc->regs + STM32H7_ADC_ISR, val, |
| 151 | val & STM32H7_EOC, STM32_ADC_TIMEOUT_US); |
| 152 | if (ret < 0) { |
| 153 | dev_err(dev, "conversion timed out: %d\n", ret); |
| 154 | return ret; |
| 155 | } |
| 156 | |
| 157 | *data = readl(adc->regs + STM32H7_ADC_DR); |
| 158 | |
| 159 | return 0; |
| 160 | } |
| 161 | |
| 162 | static int stm32_adc_chan_of_init(struct udevice *dev) |
| 163 | { |
| 164 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 165 | struct stm32_adc *adc = dev_get_priv(dev); |
| 166 | u32 chans[STM32_ADC_CH_MAX]; |
Patrick Delaunay | 35fc48d | 2019-06-21 15:26:44 +0200 | [diff] [blame] | 167 | unsigned int i, num_channels; |
| 168 | int ret; |
Fabrice Gasnier | 5a1da38 | 2018-07-24 16:31:31 +0200 | [diff] [blame] | 169 | |
| 170 | /* Retrieve single ended channels listed in device tree */ |
Patrick Delaunay | 35fc48d | 2019-06-21 15:26:44 +0200 | [diff] [blame] | 171 | ret = dev_read_size(dev, "st,adc-channels"); |
| 172 | if (ret < 0) { |
| 173 | dev_err(dev, "can't get st,adc-channels: %d\n", ret); |
| 174 | return ret; |
Fabrice Gasnier | 5a1da38 | 2018-07-24 16:31:31 +0200 | [diff] [blame] | 175 | } |
Patrick Delaunay | 35fc48d | 2019-06-21 15:26:44 +0200 | [diff] [blame] | 176 | num_channels = ret / sizeof(u32); |
Fabrice Gasnier | 5a1da38 | 2018-07-24 16:31:31 +0200 | [diff] [blame] | 177 | |
| 178 | if (num_channels > adc->cfg->max_channels) { |
| 179 | dev_err(dev, "too many st,adc-channels: %d\n", num_channels); |
| 180 | return -EINVAL; |
| 181 | } |
| 182 | |
| 183 | ret = dev_read_u32_array(dev, "st,adc-channels", chans, num_channels); |
| 184 | if (ret < 0) { |
| 185 | dev_err(dev, "can't read st,adc-channels: %d\n", ret); |
| 186 | return ret; |
| 187 | } |
| 188 | |
| 189 | for (i = 0; i < num_channels; i++) { |
| 190 | if (chans[i] >= adc->cfg->max_channels) { |
| 191 | dev_err(dev, "bad channel %u\n", chans[i]); |
| 192 | return -EINVAL; |
| 193 | } |
| 194 | uc_pdata->channel_mask |= 1 << chans[i]; |
| 195 | } |
| 196 | |
| 197 | uc_pdata->data_mask = (1 << adc->cfg->num_bits) - 1; |
| 198 | uc_pdata->data_format = ADC_DATA_FORMAT_BIN; |
| 199 | uc_pdata->data_timeout_us = 100000; |
| 200 | |
| 201 | return 0; |
| 202 | } |
| 203 | |
| 204 | static int stm32_adc_probe(struct udevice *dev) |
| 205 | { |
| 206 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 207 | struct stm32_adc_common *common = dev_get_priv(dev_get_parent(dev)); |
| 208 | struct stm32_adc *adc = dev_get_priv(dev); |
| 209 | int offset; |
| 210 | |
| 211 | offset = dev_read_u32_default(dev, "reg", -ENODATA); |
| 212 | if (offset < 0) { |
| 213 | dev_err(dev, "Can't read reg property\n"); |
| 214 | return offset; |
| 215 | } |
| 216 | adc->regs = common->base + offset; |
| 217 | adc->cfg = (const struct stm32_adc_cfg *)dev_get_driver_data(dev); |
| 218 | |
| 219 | /* VDD supplied by common vref pin */ |
| 220 | uc_pdata->vdd_supply = common->vref; |
| 221 | uc_pdata->vdd_microvolts = common->vref_uv; |
| 222 | uc_pdata->vss_microvolts = 0; |
| 223 | |
| 224 | return stm32_adc_chan_of_init(dev); |
| 225 | } |
| 226 | |
| 227 | static const struct adc_ops stm32_adc_ops = { |
| 228 | .start_channel = stm32_adc_start_channel, |
| 229 | .channel_data = stm32_adc_channel_data, |
| 230 | .stop = stm32_adc_stop, |
| 231 | }; |
| 232 | |
| 233 | static const struct stm32_adc_cfg stm32h7_adc_cfg = { |
| 234 | .num_bits = 16, |
| 235 | .max_channels = STM32_ADC_CH_MAX, |
| 236 | }; |
| 237 | |
| 238 | static const struct stm32_adc_cfg stm32mp1_adc_cfg = { |
| 239 | .num_bits = 16, |
| 240 | .max_channels = STM32_ADC_CH_MAX, |
| 241 | .has_vregready = true, |
| 242 | }; |
| 243 | |
| 244 | static const struct udevice_id stm32_adc_ids[] = { |
| 245 | { .compatible = "st,stm32h7-adc", |
| 246 | .data = (ulong)&stm32h7_adc_cfg }, |
| 247 | { .compatible = "st,stm32mp1-adc", |
| 248 | .data = (ulong)&stm32mp1_adc_cfg }, |
| 249 | {} |
| 250 | }; |
| 251 | |
| 252 | U_BOOT_DRIVER(stm32_adc) = { |
| 253 | .name = "stm32-adc", |
| 254 | .id = UCLASS_ADC, |
| 255 | .of_match = stm32_adc_ids, |
| 256 | .probe = stm32_adc_probe, |
| 257 | .ops = &stm32_adc_ops, |
| 258 | .priv_auto_alloc_size = sizeof(struct stm32_adc), |
| 259 | }; |