Andre Heider | 7d91960 | 2021-10-01 19:29:00 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | // Copyright (C) 2019 Ondřej Jirman <megous@megous.com> |
| 3 | |
| 4 | /dts-v1/; |
| 5 | |
| 6 | #include "sun50i-h6.dtsi" |
| 7 | #include "sun50i-h6-cpu-opp.dtsi" |
| 8 | |
| 9 | #include <dt-bindings/gpio/gpio.h> |
| 10 | |
| 11 | / { |
| 12 | model = "OrangePi 3"; |
| 13 | compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6"; |
| 14 | |
| 15 | aliases { |
| 16 | serial0 = &uart0; |
| 17 | serial1 = &uart1; |
| 18 | }; |
| 19 | |
| 20 | chosen { |
| 21 | stdout-path = "serial0:115200n8"; |
| 22 | }; |
| 23 | |
| 24 | connector { |
| 25 | compatible = "hdmi-connector"; |
| 26 | ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ |
| 27 | type = "a"; |
| 28 | |
| 29 | port { |
| 30 | hdmi_con_in: endpoint { |
| 31 | remote-endpoint = <&hdmi_out_con>; |
| 32 | }; |
| 33 | }; |
| 34 | }; |
| 35 | |
| 36 | ext_osc32k: ext_osc32k_clk { |
| 37 | #clock-cells = <0>; |
| 38 | compatible = "fixed-clock"; |
| 39 | clock-frequency = <32768>; |
| 40 | clock-output-names = "ext_osc32k"; |
| 41 | }; |
| 42 | |
| 43 | leds { |
| 44 | compatible = "gpio-leds"; |
| 45 | |
| 46 | power { |
| 47 | label = "orangepi:red:power"; |
| 48 | gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ |
| 49 | default-state = "on"; |
| 50 | }; |
| 51 | |
| 52 | status { |
| 53 | label = "orangepi:green:status"; |
| 54 | gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ |
| 55 | }; |
| 56 | }; |
| 57 | |
| 58 | reg_vcc5v: vcc5v { |
| 59 | /* board wide 5V supply directly from the DC jack */ |
| 60 | compatible = "regulator-fixed"; |
| 61 | regulator-name = "vcc-5v"; |
| 62 | regulator-min-microvolt = <5000000>; |
| 63 | regulator-max-microvolt = <5000000>; |
| 64 | regulator-always-on; |
| 65 | }; |
| 66 | |
| 67 | reg_vcc33_wifi: vcc33-wifi { |
| 68 | /* Always on 3.3V regulator for WiFi and BT */ |
| 69 | compatible = "regulator-fixed"; |
| 70 | regulator-name = "vcc33-wifi"; |
| 71 | regulator-min-microvolt = <3300000>; |
| 72 | regulator-max-microvolt = <3300000>; |
| 73 | regulator-always-on; |
| 74 | vin-supply = <®_vcc5v>; |
| 75 | }; |
| 76 | |
| 77 | reg_vcc_wifi_io: vcc-wifi-io { |
| 78 | /* Always on 1.8V/300mA regulator for WiFi and BT IO */ |
| 79 | compatible = "regulator-fixed"; |
| 80 | regulator-name = "vcc-wifi-io"; |
| 81 | regulator-min-microvolt = <1800000>; |
| 82 | regulator-max-microvolt = <1800000>; |
| 83 | regulator-always-on; |
| 84 | vin-supply = <®_vcc33_wifi>; |
| 85 | }; |
| 86 | |
| 87 | wifi_pwrseq: wifi-pwrseq { |
| 88 | compatible = "mmc-pwrseq-simple"; |
| 89 | clocks = <&rtc 1>; |
| 90 | clock-names = "ext_clock"; |
| 91 | reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ |
| 92 | post-power-on-delay-ms = <200>; |
| 93 | }; |
| 94 | }; |
| 95 | |
| 96 | &cpu0 { |
| 97 | cpu-supply = <®_dcdca>; |
| 98 | }; |
| 99 | |
| 100 | &de { |
| 101 | status = "okay"; |
| 102 | }; |
| 103 | |
| 104 | &dwc3 { |
| 105 | status = "okay"; |
| 106 | }; |
| 107 | |
| 108 | &ehci0 { |
| 109 | status = "okay"; |
| 110 | }; |
| 111 | |
| 112 | &ehci3 { |
| 113 | status = "okay"; |
| 114 | }; |
| 115 | |
| 116 | &gpu { |
| 117 | mali-supply = <®_dcdcc>; |
| 118 | status = "okay"; |
| 119 | }; |
| 120 | |
| 121 | &hdmi { |
| 122 | status = "okay"; |
| 123 | }; |
| 124 | |
| 125 | &hdmi_out { |
| 126 | hdmi_out_con: endpoint { |
| 127 | remote-endpoint = <&hdmi_con_in>; |
| 128 | }; |
| 129 | }; |
| 130 | |
| 131 | &mmc0 { |
| 132 | vmmc-supply = <®_cldo1>; |
| 133 | cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| 134 | bus-width = <4>; |
| 135 | status = "okay"; |
| 136 | }; |
| 137 | |
| 138 | &mmc1 { |
| 139 | vmmc-supply = <®_vcc33_wifi>; |
| 140 | vqmmc-supply = <®_vcc_wifi_io>; |
| 141 | mmc-pwrseq = <&wifi_pwrseq>; |
| 142 | bus-width = <4>; |
| 143 | non-removable; |
| 144 | status = "okay"; |
| 145 | |
| 146 | brcm: sdio-wifi@1 { |
| 147 | reg = <1>; |
| 148 | compatible = "brcm,bcm4329-fmac"; |
| 149 | interrupt-parent = <&r_pio>; |
| 150 | interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ |
| 151 | interrupt-names = "host-wake"; |
| 152 | }; |
| 153 | }; |
| 154 | |
| 155 | &mmc2 { |
| 156 | vmmc-supply = <®_cldo1>; |
| 157 | vqmmc-supply = <®_bldo2>; |
| 158 | cap-mmc-hw-reset; |
| 159 | non-removable; |
| 160 | bus-width = <8>; |
| 161 | status = "okay"; |
| 162 | }; |
| 163 | |
| 164 | &ohci0 { |
| 165 | status = "okay"; |
| 166 | }; |
| 167 | |
| 168 | &ohci3 { |
| 169 | status = "okay"; |
| 170 | }; |
| 171 | |
| 172 | &pio { |
| 173 | vcc-pc-supply = <®_bldo2>; |
| 174 | vcc-pd-supply = <®_cldo1>; |
| 175 | vcc-pg-supply = <®_vcc_wifi_io>; |
| 176 | }; |
| 177 | |
| 178 | &r_i2c { |
| 179 | status = "okay"; |
| 180 | |
| 181 | axp805: pmic@36 { |
| 182 | compatible = "x-powers,axp805", "x-powers,axp806"; |
| 183 | reg = <0x36>; |
| 184 | interrupt-parent = <&r_intc>; |
| 185 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 186 | interrupt-controller; |
| 187 | #interrupt-cells = <1>; |
| 188 | x-powers,self-working-mode; |
| 189 | vina-supply = <®_vcc5v>; |
| 190 | vinb-supply = <®_vcc5v>; |
| 191 | vinc-supply = <®_vcc5v>; |
| 192 | vind-supply = <®_vcc5v>; |
| 193 | vine-supply = <®_vcc5v>; |
| 194 | aldoin-supply = <®_vcc5v>; |
| 195 | bldoin-supply = <®_vcc5v>; |
| 196 | cldoin-supply = <®_vcc5v>; |
| 197 | |
| 198 | regulators { |
| 199 | reg_aldo1: aldo1 { |
| 200 | regulator-always-on; |
| 201 | regulator-min-microvolt = <3300000>; |
| 202 | regulator-max-microvolt = <3300000>; |
| 203 | regulator-name = "vcc-pl-led-ir"; |
| 204 | }; |
| 205 | |
| 206 | reg_aldo2: aldo2 { |
| 207 | regulator-min-microvolt = <3300000>; |
| 208 | regulator-max-microvolt = <3300000>; |
| 209 | regulator-name = "vcc33-audio-tv-ephy-mac"; |
| 210 | }; |
| 211 | |
| 212 | /* ALDO3 is shorted to CLDO1 */ |
| 213 | reg_aldo3: aldo3 { |
| 214 | regulator-always-on; |
| 215 | regulator-min-microvolt = <3300000>; |
| 216 | regulator-max-microvolt = <3300000>; |
| 217 | regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1"; |
| 218 | }; |
| 219 | |
| 220 | reg_bldo1: bldo1 { |
| 221 | regulator-always-on; |
| 222 | regulator-min-microvolt = <1800000>; |
| 223 | regulator-max-microvolt = <1800000>; |
| 224 | regulator-name = "vcc18-dram-bias-pll"; |
| 225 | }; |
| 226 | |
| 227 | reg_bldo2: bldo2 { |
| 228 | regulator-always-on; |
| 229 | regulator-min-microvolt = <1800000>; |
| 230 | regulator-max-microvolt = <1800000>; |
| 231 | regulator-name = "vcc-efuse-pcie-hdmi-pc"; |
| 232 | }; |
| 233 | |
| 234 | bldo3 { |
| 235 | /* unused */ |
| 236 | }; |
| 237 | |
| 238 | bldo4 { |
| 239 | /* unused */ |
| 240 | }; |
| 241 | |
| 242 | reg_cldo1: cldo1 { |
| 243 | regulator-always-on; |
| 244 | regulator-min-microvolt = <3300000>; |
| 245 | regulator-max-microvolt = <3300000>; |
| 246 | regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2"; |
| 247 | }; |
| 248 | |
| 249 | cldo2 { |
| 250 | /* unused */ |
| 251 | }; |
| 252 | |
| 253 | cldo3 { |
| 254 | /* unused */ |
| 255 | }; |
| 256 | |
| 257 | reg_dcdca: dcdca { |
| 258 | regulator-always-on; |
| 259 | regulator-min-microvolt = <800000>; |
| 260 | regulator-max-microvolt = <1160000>; |
| 261 | regulator-ramp-delay = <2500>; |
| 262 | regulator-name = "vdd-cpu"; |
| 263 | }; |
| 264 | |
| 265 | reg_dcdcc: dcdcc { |
| 266 | regulator-enable-ramp-delay = <32000>; |
| 267 | regulator-min-microvolt = <810000>; |
| 268 | regulator-max-microvolt = <1080000>; |
| 269 | regulator-ramp-delay = <2500>; |
| 270 | regulator-name = "vdd-gpu"; |
| 271 | }; |
| 272 | |
| 273 | reg_dcdcd: dcdcd { |
| 274 | regulator-always-on; |
| 275 | regulator-min-microvolt = <960000>; |
| 276 | regulator-max-microvolt = <960000>; |
| 277 | regulator-name = "vdd-sys"; |
| 278 | }; |
| 279 | |
| 280 | reg_dcdce: dcdce { |
| 281 | regulator-always-on; |
| 282 | regulator-min-microvolt = <1200000>; |
| 283 | regulator-max-microvolt = <1200000>; |
| 284 | regulator-name = "vcc-dram"; |
| 285 | }; |
| 286 | |
| 287 | sw { |
| 288 | /* unused */ |
| 289 | }; |
| 290 | }; |
| 291 | }; |
| 292 | }; |
| 293 | |
| 294 | &r_ir { |
| 295 | status = "okay"; |
| 296 | }; |
| 297 | |
| 298 | &rtc { |
| 299 | clocks = <&ext_osc32k>; |
| 300 | }; |
| 301 | |
| 302 | &uart0 { |
| 303 | pinctrl-names = "default"; |
| 304 | pinctrl-0 = <&uart0_ph_pins>; |
| 305 | status = "okay"; |
| 306 | }; |
| 307 | |
| 308 | /* There's the BT part of the AP6256 connected to that UART */ |
| 309 | &uart1 { |
| 310 | pinctrl-names = "default"; |
| 311 | pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; |
| 312 | uart-has-rtscts; |
| 313 | status = "okay"; |
| 314 | |
| 315 | bluetooth { |
| 316 | compatible = "brcm,bcm4345c5"; |
| 317 | clocks = <&rtc 1>; |
| 318 | clock-names = "lpo"; |
| 319 | device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ |
| 320 | host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ |
| 321 | shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ |
| 322 | max-speed = <1500000>; |
| 323 | }; |
| 324 | }; |
| 325 | |
| 326 | &usb2otg { |
| 327 | /* |
| 328 | * This board doesn't have a controllable VBUS even though it |
| 329 | * does have an ID pin. Using it as anything but a USB host is |
| 330 | * unsafe. |
| 331 | */ |
| 332 | dr_mode = "host"; |
| 333 | status = "okay"; |
| 334 | }; |
| 335 | |
| 336 | &usb2phy { |
| 337 | usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */ |
| 338 | usb0_vbus-supply = <®_vcc5v>; |
| 339 | usb3_vbus-supply = <®_vcc5v>; |
| 340 | status = "okay"; |
| 341 | }; |
| 342 | |
| 343 | &usb3phy { |
| 344 | status = "okay"; |
| 345 | }; |