| Teresa Remmet | 30fb74d | 2021-01-13 16:28:09 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2020 PHYTEC Messtechnik GmbH |
| 4 | * Author: Teresa Remmet <t.remmet@phytec.de> |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | |
| 9 | #include <dt-bindings/leds/leds-pca9532.h> |
| 10 | #include <dt-bindings/pwm/pwm.h> |
| 11 | #include "imx8mp-phycore-som.dtsi" |
| 12 | |
| 13 | / { |
| 14 | model = "PHYTEC phyBOARD-Pollux i.MX8MP"; |
| 15 | compatible = "phytec,imx8mp-phyboard-pollux-rdk", |
| 16 | "phytec,imx8mp-phycore-som", "fsl,imx8mp"; |
| 17 | |
| 18 | chosen { |
| 19 | stdout-path = &uart2; |
| 20 | }; |
| 21 | |
| 22 | reg_usdhc2_vmmc: regulator-usdhc2 { |
| 23 | compatible = "regulator-fixed"; |
| 24 | pinctrl-names = "default"; |
| 25 | pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; |
| 26 | regulator-name = "VSD_3V3"; |
| 27 | regulator-min-microvolt = <3300000>; |
| 28 | regulator-max-microvolt = <3300000>; |
| 29 | gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| 30 | enable-active-high; |
| 31 | startup-delay-us = <100>; |
| 32 | off-on-delay-us = <12000>; |
| 33 | }; |
| 34 | }; |
| 35 | |
| 36 | &i2c2 { |
| 37 | clock-frequency = <400000>; |
| 38 | pinctrl-names = "default"; |
| 39 | pinctrl-0 = <&pinctrl_i2c2>; |
| 40 | pinctrl-1 = <&pinctrl_i2c2_gpio>; |
| 41 | sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 42 | scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 43 | status = "okay"; |
| 44 | |
| 45 | eeprom@51 { |
| 46 | compatible = "atmel,24c02"; |
| 47 | reg = <0x51>; |
| 48 | pagesize = <16>; |
| 49 | }; |
| 50 | |
| 51 | leds@62 { |
| 52 | compatible = "nxp,pca9533"; |
| 53 | reg = <0x62>; |
| 54 | |
| 55 | led1 { |
| 56 | type = <PCA9532_TYPE_LED>; |
| 57 | }; |
| 58 | |
| 59 | led2 { |
| 60 | type = <PCA9532_TYPE_LED>; |
| 61 | }; |
| 62 | |
| 63 | led3 { |
| 64 | type = <PCA9532_TYPE_LED>; |
| 65 | }; |
| 66 | }; |
| 67 | }; |
| 68 | |
| 69 | &snvs_pwrkey { |
| 70 | status = "okay"; |
| 71 | }; |
| 72 | |
| 73 | /* debug console */ |
| 74 | &uart2 { |
| 75 | pinctrl-names = "default"; |
| 76 | pinctrl-0 = <&pinctrl_uart2>; |
| 77 | status = "okay"; |
| 78 | }; |
| 79 | |
| 80 | /* SD-Card */ |
| 81 | &usdhc2 { |
| 82 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 83 | pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>; |
| 84 | pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; |
| 85 | pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>; |
| 86 | cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| 87 | vmmc-supply = <®_usdhc2_vmmc>; |
| 88 | bus-width = <4>; |
| 89 | status = "okay"; |
| 90 | }; |
| 91 | |
| 92 | &iomuxc { |
| 93 | pinctrl_i2c2: i2c2grp { |
| 94 | fsl,pins = < |
| 95 | MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3 |
| 96 | MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3 |
| 97 | >; |
| 98 | }; |
| 99 | |
| 100 | pinctrl_i2c2_gpio: i2c2gpiogrp { |
| 101 | fsl,pins = < |
| 102 | MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3 |
| 103 | MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3 |
| 104 | >; |
| 105 | }; |
| 106 | |
| 107 | pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { |
| 108 | fsl,pins = < |
| 109 | MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 |
| 110 | >; |
| 111 | }; |
| 112 | |
| 113 | pinctrl_uart2: uart2grp { |
| 114 | fsl,pins = < |
| 115 | MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 |
| 116 | MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 |
| 117 | >; |
| 118 | }; |
| 119 | |
| 120 | pinctrl_usdhc2_pins: usdhc2-gpiogrp { |
| 121 | fsl,pins = < |
| 122 | MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 |
| 123 | >; |
| 124 | }; |
| 125 | |
| 126 | pinctrl_usdhc2: usdhc2grp { |
| 127 | fsl,pins = < |
| 128 | MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 |
| 129 | MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 |
| 130 | MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 |
| 131 | MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 |
| 132 | MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 |
| 133 | MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 |
| 134 | MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 |
| 135 | >; |
| 136 | }; |
| 137 | |
| 138 | pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| 139 | fsl,pins = < |
| 140 | MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 |
| 141 | MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 |
| 142 | MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 |
| 143 | MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 |
| 144 | MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 |
| 145 | MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 |
| 146 | MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 |
| 147 | >; |
| 148 | }; |
| 149 | |
| 150 | pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| 151 | fsl,pins = < |
| 152 | MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 |
| 153 | MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 |
| 154 | MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 |
| 155 | MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 |
| 156 | MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 |
| 157 | MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 |
| 158 | MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 |
| 159 | >; |
| 160 | }; |
| 161 | }; |