| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: BSD-3-Clause |
| 2 | /* |
| 3 | * Copyright (c) 2022, AngeloGioacchino Del Regno |
| 4 | * <angelogioacchino.delregno@somainline.org> |
| 5 | * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org> |
| 6 | */ |
| 7 | |
| 8 | #include <dt-bindings/iio/qcom,spmi-vadc.h> |
| 9 | #include <dt-bindings/input/linux-event-codes.h> |
| 10 | #include <dt-bindings/interrupt-controller/irq.h> |
| 11 | #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> |
| 12 | #include <dt-bindings/spmi/spmi.h> |
| 13 | |
| 14 | &spmi_bus { |
| 15 | pmic@0 { |
| 16 | compatible = "qcom,pm8950", "qcom,spmi-pmic"; |
| 17 | reg = <0x0 SPMI_USID>; |
| 18 | #address-cells = <1>; |
| 19 | #size-cells = <0>; |
| 20 | |
| 21 | pon@800 { |
| 22 | compatible = "qcom,pm8916-pon"; |
| 23 | reg = <0x0800>; |
| 24 | mode-bootloader = <0x2>; |
| 25 | mode-recovery = <0x1>; |
| 26 | |
| 27 | pwrkey { |
| 28 | compatible = "qcom,pm8941-pwrkey"; |
| 29 | interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; |
| 30 | debounce = <15625>; |
| 31 | bias-pull-up; |
| 32 | linux,code = <KEY_POWER>; |
| 33 | }; |
| 34 | }; |
| 35 | |
| 36 | pm8950_temp: temp-alarm@2400 { |
| 37 | compatible = "qcom,spmi-temp-alarm"; |
| 38 | reg = <0x2400>; |
| 39 | interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; |
| 40 | io-channels = <&pm8950_vadc VADC_DIE_TEMP>; |
| 41 | io-channel-names = "thermal"; |
| 42 | #thermal-sensor-cells = <0>; |
| 43 | }; |
| 44 | |
| 45 | pm8950_vadc: adc@3100 { |
| 46 | compatible = "qcom,spmi-vadc"; |
| 47 | reg = <0x3100>; |
| 48 | interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| 49 | #address-cells = <1>; |
| 50 | #size-cells = <0>; |
| 51 | #io-channel-cells = <1>; |
| 52 | |
| 53 | channel@5 { |
| 54 | reg = <VADC_VCOIN>; |
| 55 | qcom,pre-scaling = <1 1>; |
| 56 | label = "vcoin"; |
| 57 | }; |
| 58 | |
| 59 | channel@7 { |
| 60 | reg = <VADC_VSYS>; |
| 61 | qcom,pre-scaling = <1 1>; |
| 62 | label = "vph_pwr"; |
| 63 | }; |
| 64 | |
| 65 | channel@8 { |
| 66 | reg = <VADC_DIE_TEMP>; |
| 67 | qcom,pre-scaling = <1 1>; |
| 68 | label = "die_temp"; |
| 69 | }; |
| 70 | |
| 71 | channel@9 { |
| 72 | reg = <VADC_REF_625MV>; |
| 73 | qcom,pre-scaling = <1 1>; |
| 74 | label = "ref_625mv"; |
| 75 | }; |
| 76 | |
| 77 | channel@a { |
| 78 | reg = <VADC_REF_1250MV>; |
| 79 | qcom,pre-scaling = <1 1>; |
| 80 | label = "ref_1250mv"; |
| 81 | }; |
| 82 | |
| 83 | channel@c { |
| 84 | reg = <VADC_SPARE1>; |
| 85 | qcom,pre-scaling = <1 1>; |
| 86 | label = "ref_buf_625mv"; |
| 87 | }; |
| 88 | |
| 89 | channel@e { |
| 90 | reg = <VADC_GND_REF>; |
| 91 | label = "ref_gnd"; |
| 92 | }; |
| 93 | |
| 94 | channel@f { |
| 95 | reg = <VADC_VDD_VADC>; |
| 96 | label = "ref_vdd"; |
| 97 | }; |
| 98 | |
| 99 | channel@11 { |
| 100 | reg = <VADC_P_MUX2_1_1>; |
| 101 | qcom,pre-scaling = <1 1>; |
| 102 | qcom,ratiometric; |
| 103 | qcom,hw-settle-time = <200>; |
| 104 | label = "pa_therm1"; |
| 105 | }; |
| 106 | |
| 107 | channel@13 { |
| 108 | reg = <VADC_P_MUX4_1_1>; |
| 109 | qcom,pre-scaling = <1 1>; |
| 110 | qcom,ratiometric; |
| 111 | qcom,hw-settle-time = <200>; |
| 112 | label = "case_therm"; |
| 113 | }; |
| 114 | |
| 115 | channel@32 { |
| 116 | reg = <VADC_LR_MUX3_XO_THERM>; |
| 117 | qcom,pre-scaling = <1 1>; |
| 118 | qcom,ratiometric; |
| 119 | qcom,hw-settle-time = <200>; |
| 120 | label = "xo_therm"; |
| 121 | }; |
| 122 | |
| 123 | channel@36 { |
| 124 | reg = <VADC_LR_MUX7_HW_ID>; |
| 125 | qcom,pre-scaling = <1 1>; |
| 126 | qcom,ratiometric; |
| 127 | qcom,hw-settle-time = <200>; |
| 128 | label = "pa_therm0"; |
| 129 | }; |
| 130 | |
| 131 | channel@3c { |
| 132 | reg = <VADC_LR_MUX3_BUF_XO_THERM>; |
| 133 | qcom,pre-scaling = <1 1>; |
| 134 | qcom,ratiometric; |
| 135 | qcom,hw-settle-time = <200>; |
| 136 | label = "xo_therm_buf"; |
| 137 | }; |
| 138 | }; |
| 139 | |
| 140 | rtc@6000 { |
| 141 | compatible = "qcom,pm8941-rtc"; |
| 142 | reg = <0x6000>, <0x6100>; |
| 143 | reg-names = "rtc", "alarm"; |
| 144 | interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; |
| 145 | }; |
| 146 | |
| 147 | pm8950_mpps: mpps@a000 { |
| 148 | compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp"; |
| 149 | reg = <0xa000>; |
| 150 | gpio-controller; |
| 151 | gpio-ranges = <&pm8950_mpps 0 0 4>; |
| 152 | #gpio-cells = <2>; |
| 153 | interrupt-controller; |
| 154 | #interrupt-cells = <2>; |
| 155 | }; |
| 156 | |
| 157 | pm8950_gpios: gpio@c000 { |
| 158 | compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio"; |
| 159 | reg = <0xc000>; |
| 160 | gpio-controller; |
| 161 | gpio-ranges = <&pm8950_gpios 0 0 8>; |
| 162 | #gpio-cells = <2>; |
| 163 | interrupt-controller; |
| 164 | #interrupt-cells = <2>; |
| 165 | }; |
| 166 | }; |
| 167 | |
| 168 | pmic@1 { |
| 169 | compatible = "qcom,pm8950", "qcom,spmi-pmic"; |
| 170 | reg = <0x1 SPMI_USID>; |
| 171 | #address-cells = <1>; |
| 172 | #size-cells = <0>; |
| 173 | |
| 174 | pm8950_spmi_regulators: regulators { |
| 175 | compatible = "qcom,pm8950-regulators"; |
| 176 | }; |
| 177 | }; |
| 178 | }; |