blob: 03f2655af290758cb708a67f832abd6257df2894 [file] [log] [blame]
Ilya Yanok06bb9202012-11-06 13:48:21 +00001/*
2 * MUSB OTG driver register defines
3 *
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 *
22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 *
33 */
34
35#ifndef __MUSB_REGS_H__
36#define __MUSB_REGS_H__
37
38#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */
39
40/*
41 * MUSB Register bits
42 */
43
44/* POWER */
45#define MUSB_POWER_ISOUPDATE 0x80
46#define MUSB_POWER_SOFTCONN 0x40
47#define MUSB_POWER_HSENAB 0x20
48#define MUSB_POWER_HSMODE 0x10
49#define MUSB_POWER_RESET 0x08
50#define MUSB_POWER_RESUME 0x04
51#define MUSB_POWER_SUSPENDM 0x02
52#define MUSB_POWER_ENSUSPEND 0x01
53
54/* INTRUSB */
55#define MUSB_INTR_SUSPEND 0x01
56#define MUSB_INTR_RESUME 0x02
57#define MUSB_INTR_RESET 0x04
58#define MUSB_INTR_BABBLE 0x04
59#define MUSB_INTR_SOF 0x08
60#define MUSB_INTR_CONNECT 0x10
61#define MUSB_INTR_DISCONNECT 0x20
62#define MUSB_INTR_SESSREQ 0x40
63#define MUSB_INTR_VBUSERROR 0x80 /* For SESSION end */
64
65/* DEVCTL */
66#define MUSB_DEVCTL_BDEVICE 0x80
67#define MUSB_DEVCTL_FSDEV 0x40
68#define MUSB_DEVCTL_LSDEV 0x20
69#define MUSB_DEVCTL_VBUS 0x18
70#define MUSB_DEVCTL_VBUS_SHIFT 3
71#define MUSB_DEVCTL_HM 0x04
72#define MUSB_DEVCTL_HR 0x02
73#define MUSB_DEVCTL_SESSION 0x01
74
75/* MUSB ULPI VBUSCONTROL */
76#define MUSB_ULPI_USE_EXTVBUS 0x01
77#define MUSB_ULPI_USE_EXTVBUSIND 0x02
78/* ULPI_REG_CONTROL */
79#define MUSB_ULPI_REG_REQ (1 << 0)
80#define MUSB_ULPI_REG_CMPLT (1 << 1)
81#define MUSB_ULPI_RDN_WR (1 << 2)
82
83/* TESTMODE */
84#define MUSB_TEST_FORCE_HOST 0x80
85#define MUSB_TEST_FIFO_ACCESS 0x40
86#define MUSB_TEST_FORCE_FS 0x20
87#define MUSB_TEST_FORCE_HS 0x10
88#define MUSB_TEST_PACKET 0x08
89#define MUSB_TEST_K 0x04
90#define MUSB_TEST_J 0x02
91#define MUSB_TEST_SE0_NAK 0x01
92
93/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
94#define MUSB_FIFOSZ_DPB 0x10
95/* Allocation size (8, 16, 32, ... 4096) */
96#define MUSB_FIFOSZ_SIZE 0x0f
97
98/* CSR0 */
99#define MUSB_CSR0_FLUSHFIFO 0x0100
100#define MUSB_CSR0_TXPKTRDY 0x0002
101#define MUSB_CSR0_RXPKTRDY 0x0001
102
103/* CSR0 in Peripheral mode */
104#define MUSB_CSR0_P_SVDSETUPEND 0x0080
105#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
106#define MUSB_CSR0_P_SENDSTALL 0x0020
107#define MUSB_CSR0_P_SETUPEND 0x0010
108#define MUSB_CSR0_P_DATAEND 0x0008
109#define MUSB_CSR0_P_SENTSTALL 0x0004
110
111/* CSR0 in Host mode */
112#define MUSB_CSR0_H_DIS_PING 0x0800
113#define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */
114#define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control */
115#define MUSB_CSR0_H_NAKTIMEOUT 0x0080
116#define MUSB_CSR0_H_STATUSPKT 0x0040
117#define MUSB_CSR0_H_REQPKT 0x0020
118#define MUSB_CSR0_H_ERROR 0x0010
119#define MUSB_CSR0_H_SETUPPKT 0x0008
120#define MUSB_CSR0_H_RXSTALL 0x0004
121
122/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
123#define MUSB_CSR0_P_WZC_BITS \
124 (MUSB_CSR0_P_SENTSTALL)
125#define MUSB_CSR0_H_WZC_BITS \
126 (MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
127 | MUSB_CSR0_RXPKTRDY)
128
129/* TxType/RxType */
130#define MUSB_TYPE_SPEED 0xc0
131#define MUSB_TYPE_SPEED_SHIFT 6
132#define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */
133#define MUSB_TYPE_PROTO_SHIFT 4
134#define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */
135
136/* CONFIGDATA */
137#define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */
138#define MUSB_CONFIGDATA_MPTXE 0x40 /* Auto bulk pkt splitting */
139#define MUSB_CONFIGDATA_BIGENDIAN 0x20
140#define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */
141#define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */
142#define MUSB_CONFIGDATA_DYNFIFO 0x04 /* Dynamic FIFO sizing */
143#define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */
144#define MUSB_CONFIGDATA_UTMIDW 0x01 /* Data width 0/1 => 8/16bits */
145
146/* TXCSR in Peripheral and Host mode */
147#define MUSB_TXCSR_AUTOSET 0x8000
148#define MUSB_TXCSR_DMAENAB 0x1000
149#define MUSB_TXCSR_FRCDATATOG 0x0800
150#define MUSB_TXCSR_DMAMODE 0x0400
151#define MUSB_TXCSR_CLRDATATOG 0x0040
152#define MUSB_TXCSR_FLUSHFIFO 0x0008
153#define MUSB_TXCSR_FIFONOTEMPTY 0x0002
154#define MUSB_TXCSR_TXPKTRDY 0x0001
155
156/* TXCSR in Peripheral mode */
157#define MUSB_TXCSR_P_ISO 0x4000
158#define MUSB_TXCSR_P_INCOMPTX 0x0080
159#define MUSB_TXCSR_P_SENTSTALL 0x0020
160#define MUSB_TXCSR_P_SENDSTALL 0x0010
161#define MUSB_TXCSR_P_UNDERRUN 0x0004
162
163/* TXCSR in Host mode */
164#define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200
165#define MUSB_TXCSR_H_DATATOGGLE 0x0100
166#define MUSB_TXCSR_H_NAKTIMEOUT 0x0080
167#define MUSB_TXCSR_H_RXSTALL 0x0020
168#define MUSB_TXCSR_H_ERROR 0x0004
169
170/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
171#define MUSB_TXCSR_P_WZC_BITS \
172 (MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
173 | MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
174#define MUSB_TXCSR_H_WZC_BITS \
175 (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
176 | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
177
178/* RXCSR in Peripheral and Host mode */
179#define MUSB_RXCSR_AUTOCLEAR 0x8000
180#define MUSB_RXCSR_DMAENAB 0x2000
181#define MUSB_RXCSR_DISNYET 0x1000
182#define MUSB_RXCSR_PID_ERR 0x1000
183#define MUSB_RXCSR_DMAMODE 0x0800
184#define MUSB_RXCSR_INCOMPRX 0x0100
185#define MUSB_RXCSR_CLRDATATOG 0x0080
186#define MUSB_RXCSR_FLUSHFIFO 0x0010
187#define MUSB_RXCSR_DATAERROR 0x0008
188#define MUSB_RXCSR_FIFOFULL 0x0002
189#define MUSB_RXCSR_RXPKTRDY 0x0001
190
191/* RXCSR in Peripheral mode */
192#define MUSB_RXCSR_P_ISO 0x4000
193#define MUSB_RXCSR_P_SENTSTALL 0x0040
194#define MUSB_RXCSR_P_SENDSTALL 0x0020
195#define MUSB_RXCSR_P_OVERRUN 0x0004
196
197/* RXCSR in Host mode */
198#define MUSB_RXCSR_H_AUTOREQ 0x4000
199#define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400
200#define MUSB_RXCSR_H_DATATOGGLE 0x0200
201#define MUSB_RXCSR_H_RXSTALL 0x0040
202#define MUSB_RXCSR_H_REQPKT 0x0020
203#define MUSB_RXCSR_H_ERROR 0x0004
204
205/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
206#define MUSB_RXCSR_P_WZC_BITS \
207 (MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
208 | MUSB_RXCSR_RXPKTRDY)
209#define MUSB_RXCSR_H_WZC_BITS \
210 (MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
211 | MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
212
213/* HUBADDR */
214#define MUSB_HUBADDR_MULTI_TT 0x80
215
216
217#ifndef CONFIG_BLACKFIN
218
219/*
220 * Common USB registers
221 */
222
223#define MUSB_FADDR 0x00 /* 8-bit */
224#define MUSB_POWER 0x01 /* 8-bit */
225
226#define MUSB_INTRTX 0x02 /* 16-bit */
227#define MUSB_INTRRX 0x04
228#define MUSB_INTRTXE 0x06
229#define MUSB_INTRRXE 0x08
230#define MUSB_INTRUSB 0x0A /* 8 bit */
231#define MUSB_INTRUSBE 0x0B /* 8 bit */
232#define MUSB_FRAME 0x0C
233#define MUSB_INDEX 0x0E /* 8 bit */
234#define MUSB_TESTMODE 0x0F /* 8 bit */
235
236/* Get offset for a given FIFO from musb->mregs */
237#if defined(CONFIG_USB_MUSB_TUSB6010) || \
238 defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
239#define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20))
240#else
241#define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4))
242#endif
243
244/*
245 * Additional Control Registers
246 */
247
248#define MUSB_DEVCTL 0x60 /* 8 bit */
249
250/* These are always controlled through the INDEX register */
251#define MUSB_TXFIFOSZ 0x62 /* 8-bit (see masks) */
252#define MUSB_RXFIFOSZ 0x63 /* 8-bit (see masks) */
253#define MUSB_TXFIFOADD 0x64 /* 16-bit offset shifted right 3 */
254#define MUSB_RXFIFOADD 0x66 /* 16-bit offset shifted right 3 */
255
256/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
257#define MUSB_HWVERS 0x6C /* 8 bit */
258#define MUSB_ULPI_BUSCONTROL 0x70 /* 8 bit */
259#define MUSB_ULPI_INT_MASK 0x72 /* 8 bit */
260#define MUSB_ULPI_INT_SRC 0x73 /* 8 bit */
261#define MUSB_ULPI_REG_DATA 0x74 /* 8 bit */
262#define MUSB_ULPI_REG_ADDR 0x75 /* 8 bit */
263#define MUSB_ULPI_REG_CONTROL 0x76 /* 8 bit */
264#define MUSB_ULPI_RAW_DATA 0x77 /* 8 bit */
265
266#define MUSB_EPINFO 0x78 /* 8 bit */
267#define MUSB_RAMINFO 0x79 /* 8 bit */
268#define MUSB_LINKINFO 0x7a /* 8 bit */
269#define MUSB_VPLEN 0x7b /* 8 bit */
270#define MUSB_HS_EOF1 0x7c /* 8 bit */
271#define MUSB_FS_EOF1 0x7d /* 8 bit */
272#define MUSB_LS_EOF1 0x7e /* 8 bit */
273
274/* Offsets to endpoint registers */
275#define MUSB_TXMAXP 0x00
276#define MUSB_TXCSR 0x02
277#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
278#define MUSB_RXMAXP 0x04
279#define MUSB_RXCSR 0x06
280#define MUSB_RXCOUNT 0x08
281#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
282#define MUSB_TXTYPE 0x0A
283#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
284#define MUSB_TXINTERVAL 0x0B
285#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
286#define MUSB_RXTYPE 0x0C
287#define MUSB_RXINTERVAL 0x0D
288#define MUSB_FIFOSIZE 0x0F
289#define MUSB_CONFIGDATA MUSB_FIFOSIZE /* Re-used for EP0 */
290
291/* Offsets to endpoint registers in indexed model (using INDEX register) */
292#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
293 (0x10 + (_offset))
294
295/* Offsets to endpoint registers in flat models */
296#define MUSB_FLAT_OFFSET(_epnum, _offset) \
297 (0x100 + (0x10*(_epnum)) + (_offset))
298
299#if defined(CONFIG_USB_MUSB_TUSB6010) || \
300 defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
301/* TUSB6010 EP0 configuration register is special */
302#define MUSB_TUSB_OFFSET(_epnum, _offset) \
303 (0x10 + _offset)
304#include "tusb6010.h" /* Needed "only" for TUSB_EP0_CONF */
305#endif
306
307#define MUSB_TXCSR_MODE 0x2000
308
309/* "bus control"/target registers, for host side multipoint (external hubs) */
310#define MUSB_TXFUNCADDR 0x00
311#define MUSB_TXHUBADDR 0x02
312#define MUSB_TXHUBPORT 0x03
313
314#define MUSB_RXFUNCADDR 0x04
315#define MUSB_RXHUBADDR 0x06
316#define MUSB_RXHUBPORT 0x07
317
318#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
319 (0x80 + (8*(_epnum)) + (_offset))
320
321static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
322{
323 musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
324}
325
326static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
327{
328 musb_writew(mbase, MUSB_TXFIFOADD, c_off);
329}
330
331static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
332{
333 musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
334}
335
336static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
337{
338 musb_writew(mbase, MUSB_RXFIFOADD, c_off);
339}
340
341static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
342{
343 musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val);
344}
345
346static inline u8 musb_read_txfifosz(void __iomem *mbase)
347{
348 return musb_readb(mbase, MUSB_TXFIFOSZ);
349}
350
351static inline u16 musb_read_txfifoadd(void __iomem *mbase)
352{
353 return musb_readw(mbase, MUSB_TXFIFOADD);
354}
355
356static inline u8 musb_read_rxfifosz(void __iomem *mbase)
357{
358 return musb_readb(mbase, MUSB_RXFIFOSZ);
359}
360
361static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
362{
363 return musb_readw(mbase, MUSB_RXFIFOADD);
364}
365
366static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
367{
368 return musb_readb(mbase, MUSB_ULPI_BUSCONTROL);
369}
370
371static inline u8 musb_read_configdata(void __iomem *mbase)
372{
373 musb_writeb(mbase, MUSB_INDEX, 0);
374 return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
375}
376
377static inline u16 musb_read_hwvers(void __iomem *mbase)
378{
379 return musb_readw(mbase, MUSB_HWVERS);
380}
381
382static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
383{
384 return (MUSB_BUSCTL_OFFSET(i, 0) + mbase);
385}
386
387static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
388 u8 qh_addr_reg)
389{
390 musb_writeb(ep_target_regs, MUSB_RXFUNCADDR, qh_addr_reg);
391}
392
393static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
394 u8 qh_h_addr_reg)
395{
396 musb_writeb(ep_target_regs, MUSB_RXHUBADDR, qh_h_addr_reg);
397}
398
399static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
400 u8 qh_h_port_reg)
401{
402 musb_writeb(ep_target_regs, MUSB_RXHUBPORT, qh_h_port_reg);
403}
404
405static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
406 u8 qh_addr_reg)
407{
408 musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
409 qh_addr_reg);
410}
411
412static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
413 u8 qh_addr_reg)
414{
415 musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
416 qh_addr_reg);
417}
418
419static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
420 u8 qh_h_port_reg)
421{
422 musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
423 qh_h_port_reg);
424}
425
426static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
427{
428 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR));
429}
430
431static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
432{
433 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR));
434}
435
436static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
437{
438 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT));
439}
440
441static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
442{
443 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR));
444}
445
446static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
447{
448 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR));
449}
450
451static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
452{
453 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT));
454}
455
456#else /* CONFIG_BLACKFIN */
457
458#define USB_BASE USB_FADDR
459#define USB_OFFSET(reg) (reg - USB_BASE)
460
461/*
462 * Common USB registers
463 */
464#define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */
465#define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */
466#define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */
467#define MUSB_INTRRX USB_OFFSET(USB_INTRRX)
468#define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE)
469#define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE)
470#define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */
471#define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */
472#define MUSB_FRAME USB_OFFSET(USB_FRAME)
473#define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */
474#define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */
475
476/* Get offset for a given FIFO from musb->mregs */
477#define MUSB_FIFO_OFFSET(epnum) \
478 (USB_OFFSET(USB_EP0_FIFO) + ((epnum) * 8))
479
480/*
481 * Additional Control Registers
482 */
483
484#define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */
485
486#define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */
487#define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */
488#define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */
489#define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */
490#define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */
491
492/* Offsets to endpoint registers */
493#define MUSB_TXMAXP 0x00
494#define MUSB_TXCSR 0x04
495#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
496#define MUSB_RXMAXP 0x08
497#define MUSB_RXCSR 0x0C
498#define MUSB_RXCOUNT 0x10
499#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
500#define MUSB_TXTYPE 0x14
501#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
502#define MUSB_TXINTERVAL 0x18
503#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
504#define MUSB_RXTYPE 0x1C
505#define MUSB_RXINTERVAL 0x20
506#define MUSB_TXCOUNT 0x28
507
508/* Offsets to endpoint registers in indexed model (using INDEX register) */
509#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
510 (0x40 + (_offset))
511
512/* Offsets to endpoint registers in flat models */
513#define MUSB_FLAT_OFFSET(_epnum, _offset) \
514 (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
515
516/* Not implemented - HW has separate Tx/Rx FIFO */
517#define MUSB_TXCSR_MODE 0x0000
518
519static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
520{
521}
522
523static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
524{
525}
526
527static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
528{
529}
530
531static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
532{
533}
534
535static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
536{
537}
538
539static inline u8 musb_read_txfifosz(void __iomem *mbase)
540{
541 return 0;
542}
543
544static inline u16 musb_read_txfifoadd(void __iomem *mbase)
545{
546 return 0;
547}
548
549static inline u8 musb_read_rxfifosz(void __iomem *mbase)
550{
551 return 0;
552}
553
554static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
555{
556 return 0;
557}
558
559static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
560{
561 return 0;
562}
563
564static inline u8 musb_read_configdata(void __iomem *mbase)
565{
566 return 0;
567}
568
569static inline u16 musb_read_hwvers(void __iomem *mbase)
570{
571 /*
572 * This register is invisible on Blackfin, actually the MUSB
573 * RTL version of Blackfin is 1.9, so just harcode its value.
574 */
575 return MUSB_HWVERS_1900;
576}
577
578static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
579{
580 return NULL;
581}
582
583static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
584 u8 qh_addr_req)
585{
586}
587
588static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
589 u8 qh_h_addr_reg)
590{
591}
592
593static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
594 u8 qh_h_port_reg)
595{
596}
597
598static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
599 u8 qh_addr_reg)
600{
601}
602
603static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
604 u8 qh_addr_reg)
605{
606}
607
608static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
609 u8 qh_h_port_reg)
610{
611}
612
613static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
614{
615 return 0;
616}
617
618static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
619{
620 return 0;
621}
622
623static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
624{
625 return 0;
626}
627
628static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
629{
630 return 0;
631}
632
633static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
634{
635 return 0;
636}
637
638static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
639{
640 return 0;
641}
642
643#endif /* CONFIG_BLACKFIN */
644
645#endif /* __MUSB_REGS_H__ */