blob: 51b1d00d993d667a09a2f8b61657950cde121e37 [file] [log] [blame]
Thomas Chou7ffbbf52010-04-21 08:40:59 +08001/*
2 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
3 * Scott McNutt <smcnutt@psyent.com>
4 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
5 *
Wolfgang Denkbd8ec7e2013-10-07 13:07:26 +02006 * SPDX-License-Identifier: GPL-2.0+
Thomas Chou7ffbbf52010-04-21 08:40:59 +08007 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12/*
13 * BOARD/CPU
14 */
15#include "../board/altera/nios2-generic/custom_fpga.h" /* fpga parameters */
16#define CONFIG_BOARD_NAME "nios2-generic" /* custom board name */
17#define CONFIG_BOARD_EARLY_INIT_F /* enable early board-spec. init */
Thomas Choucce3e752014-08-22 11:36:47 +080018#define CONFIG_DISPLAY_CPUINFO
19#define CONFIG_DISPLAY_BOARDINFO
Thomas Chou7ffbbf52010-04-21 08:40:59 +080020#define CONFIG_SYS_NIOS_SYSID_BASE CONFIG_SYS_SYSID_BASE
21
22/*
23 * SERIAL
24 */
25#define CONFIG_ALTERA_UART
26#if defined(CONFIG_ALTERA_JTAG_UART)
27# define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_JTAG_UART_BASE
28#else
29# define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_UART_BASE
30#endif
31
32#define CONFIG_ALTERA_JTAG_UART_BYPASS
33#define CONFIG_SYS_NIOS_FIXEDBAUD
34#define CONFIG_BAUDRATE CONFIG_SYS_UART_BAUD
35#define CONFIG_SYS_BAUDRATE_TABLE {CONFIG_BAUDRATE}
36#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
37
38/*
39 * TIMER
40 */
Graeme Russ13ec42b2011-07-15 02:18:56 +000041#define CONFIG_SYS_LOW_RES_TIMER
Thomas Chou7ffbbf52010-04-21 08:40:59 +080042#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_TIMER_BASE
43#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_TIMER_IRQ
Thomas Chou7ffbbf52010-04-21 08:40:59 +080044#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/
45#define CONFIG_SYS_NIOS_TMRCNT \
46 (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1)
47
48/*
49 * STATUS LED
50 */
Joachim Foersterb19bfad2011-10-21 15:48:51 +020051#define CONFIG_ALTERA_PIO
52#define CONFIG_SYS_ALTERA_PIO_NUM 1
53#define CONFIG_SYS_ALTERA_PIO_GPIO_NUM LED_PIO_WIDTH
54
Thomas Chou7ffbbf52010-04-21 08:40:59 +080055#define CONFIG_STATUS_LED /* Enable status driver */
Thomas Choud3db57b2012-11-05 12:51:54 +080056#define CONFIG_BOARD_SPECIFIC_LED
Thomas Chouf6a59cb2010-04-30 11:34:15 +080057#define CONFIG_GPIO_LED /* Enable GPIO LED driver */
58#define CONFIG_GPIO /* Enable GPIO driver */
Thomas Chou7ffbbf52010-04-21 08:40:59 +080059
Thomas Chouf6a59cb2010-04-30 11:34:15 +080060#define STATUS_LED_BIT 0 /* Bit-0 on GPIO */
Thomas Chou7ffbbf52010-04-21 08:40:59 +080061#define STATUS_LED_STATE 1 /* Blinking */
62#define STATUS_LED_PERIOD (500 / CONFIG_SYS_NIOS_TMRMS) /* 500 msec */
63
64/*
65 * BOOTP options
66 */
67#define CONFIG_BOOTP_BOOTFILESIZE
68#define CONFIG_BOOTP_BOOTPATH
69#define CONFIG_BOOTP_GATEWAY
70#define CONFIG_BOOTP_HOSTNAME
71
72/*
73 * Command line configuration.
74 */
75#include <config_cmd_default.h>
76#undef CONFIG_CMD_BOOTD
77#undef CONFIG_CMD_FPGA
78#undef CONFIG_CMD_IMLS
79#undef CONFIG_CMD_ITEST
80#undef CONFIG_CMD_NFS
81#undef CONFIG_CMD_SETGETDCR
82#undef CONFIG_CMD_XIMG
83
84#ifdef CONFIG_CMD_NET
Thomas Chou7ffbbf52010-04-21 08:40:59 +080085# define CONFIG_CMD_DHCP
86# define CONFIG_CMD_PING
87#endif
88
89/*
90 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
91 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
92 * reset address, no? This will keep the environment in user region
93 * of flash. NOTE: the monitor length must be multiple of sector size
94 * (which is common practice).
95 */
96#define CONFIG_ENV_IS_IN_FLASH
97
98#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */
99#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
100#define CONFIG_ENV_ADDR ((CONFIG_SYS_RESET_ADDR + \
101 CONFIG_SYS_MONITOR_LEN) | \
102 CONFIG_SYS_FLASH_BASE)
103
104/*
105 * MEMORY ORGANIZATION
Thomas Choufe06c182012-04-23 10:55:02 +0800106 * -Monitor at top of sdram.
107 * -The heap is placed below the monitor
108 * -The stack is placed below the heap (&grows down).
Thomas Chou7ffbbf52010-04-21 08:40:59 +0800109 */
110#define CONFIG_MONITOR_IS_IN_RAM
111#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */
112#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
113 CONFIG_SYS_SDRAM_SIZE - \
114 CONFIG_SYS_MONITOR_LEN)
Thomas Chou7ffbbf52010-04-21 08:40:59 +0800115#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x20000)
116#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - \
117 CONFIG_SYS_MALLOC_LEN)
Thomas Choufe06c182012-04-23 10:55:02 +0800118#define CONFIG_SYS_INIT_SP CONFIG_SYS_MALLOC_BASE
Thomas Chou7ffbbf52010-04-21 08:40:59 +0800119
120/*
121 * MISC
122 */
123#define CONFIG_SYS_LONGHELP /* Provide extended help */
Thomas Chou7ffbbf52010-04-21 08:40:59 +0800124#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
125#define CONFIG_SYS_MAXARGS 16 /* Max command args */
126#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
127#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
128 sizeof(CONFIG_SYS_PROMPT) + \
129 16) /* Print buf size */
130#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
131#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
132#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - 0x20000)
133#define CONFIG_CMDLINE_EDITING
134
135#define CONFIG_SYS_HUSH_PARSER
Thomas Chou7ffbbf52010-04-21 08:40:59 +0800136
137#endif /* __CONFIG_H */