blob: da2fc46be88b0902beac276d7fd01189a888c75c [file] [log] [blame]
wdenk7a428cc2003-06-15 22:40:42 +00001/*
wdenk69141282003-07-07 20:07:54 +00002 * (C) Copyright 2000-2003
wdenk7a428cc2003-06-15 22:40:42 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC860 1
37#define CONFIG_MPC860T 1
38#define CONFIG_MPC862 1
39
40#define CONFIG_TQM862M 1 /* ...on a TQM8xxM module */
41
42#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
43#undef CONFIG_8xx_CONS_SMC2
44#undef CONFIG_8xx_CONS_NONE
45
46#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
47
48#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
49
50#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
51
52#define CONFIG_BOARD_TYPES 1 /* support board types */
53
54#define CONFIG_PREBOOT "echo;" \
55 "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
56 "echo"
57
58#undef CONFIG_BOOTARGS
59
60#define CONFIG_EXTRA_ENV_SETTINGS \
61 "netdev=eth0\0" \
62 "nfsargs=setenv bootargs root=/dev/nfs rw " \
63 "nfsroot=$(serverip):$(rootpath)\0" \
64 "ramargs=setenv bootargs root=/dev/ram rw\0" \
65 "addip=setenv bootargs $(bootargs) " \
66 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
67 ":$(hostname):$(netdev):off panic=1\0" \
68 "flash_nfs=run nfsargs addip;" \
69 "bootm $(kernel_addr)\0" \
70 "flash_self=run ramargs addip;" \
71 "bootm $(kernel_addr) $(ramdisk_addr)\0" \
72 "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
73 "rootpath=/opt/eldk/ppc_8xx\0" \
74 "bootfile=/tftpboot/TQM862M/uImage\0" \
75 "kernel_addr=40080000\0" \
76 "ramdisk_addr=40180000\0" \
77 ""
78#define CONFIG_BOOTCOMMAND "run flash_self"
79
80#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
81#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
82
83#undef CONFIG_WATCHDOG /* watchdog disabled */
84
85#define CONFIG_STATUS_LED 1 /* Status LED enabled */
86
87#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
88
89#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
90
91#define CONFIG_MAC_PARTITION
92#define CONFIG_DOS_PARTITION
93
94#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
95
96#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
97 CFG_CMD_ASKENV | \
98 CFG_CMD_DHCP | \
99 CFG_CMD_IDE | \
100 CFG_CMD_DATE )
101
102/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
103#include <cmd_confdefs.h>
104
105/*
106 * Miscellaneous configurable options
107 */
108#define CFG_LONGHELP /* undef to save memory */
109#define CFG_PROMPT "=> " /* Monitor Command Prompt */
110
111#if 0
112#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
113#endif
114#ifdef CFG_HUSH_PARSER
115#define CFG_PROMPT_HUSH_PS2 "> "
116#endif
117
118#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
119#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
120#else
121#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
122#endif
123#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
124#define CFG_MAXARGS 16 /* max number of command args */
125#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
126
127#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
128#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
129
130#define CFG_LOAD_ADDR 0x100000 /* default load address */
131
132#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
133
134#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
135
136/*
137 * Low Level Configuration Settings
138 * (address mappings, register initial values, etc.)
139 * You should know what you are doing if you make changes here.
140 */
141/*-----------------------------------------------------------------------
142 * Internal Memory Mapped Register
143 */
144#define CFG_IMMR 0xFFF00000
145
146/*-----------------------------------------------------------------------
147 * Definitions for initial stack pointer and data area (in DPRAM)
148 */
149#define CFG_INIT_RAM_ADDR CFG_IMMR
150#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
151#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
152#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
153#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
154
155/*-----------------------------------------------------------------------
156 * Start addresses for the final memory configuration
157 * (Set up by the startup code)
158 * Please note that CFG_SDRAM_BASE _must_ start at 0
159 */
160#define CFG_SDRAM_BASE 0x00000000
161#define CFG_FLASH_BASE 0x40000000
162#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
163#define CFG_MONITOR_BASE CFG_FLASH_BASE
164#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
165
166/*
167 * For booting Linux, the board info and command line data
168 * have to be in the first 8 MB of memory, since this is
169 * the maximum mapped by the Linux kernel during initialization.
170 */
171#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
172
173/*-----------------------------------------------------------------------
174 * FLASH organization
175 */
176#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
177#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
178
179#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
180#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
181
182#define CFG_ENV_IS_IN_FLASH 1
183
184#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
185#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
186#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
187
188/* Address and size of Redundant Environment Sector */
189#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
190#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
191
192/*-----------------------------------------------------------------------
193 * Hardware Information Block
194 */
195#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
196#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
197#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
198
199/*-----------------------------------------------------------------------
200 * Cache Configuration
201 */
202#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
203#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
204#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
205#endif
206
207/*-----------------------------------------------------------------------
208 * SYPCR - System Protection Control 11-9
209 * SYPCR can only be written once after reset!
210 *-----------------------------------------------------------------------
211 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
212 */
213#if defined(CONFIG_WATCHDOG)
214#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
215 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
216#else
217#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
218#endif
219
220/*-----------------------------------------------------------------------
221 * SIUMCR - SIU Module Configuration 11-6
222 *-----------------------------------------------------------------------
223 * PCMCIA config., multi-function pin tri-state
224 */
225#ifndef CONFIG_CAN_DRIVER
226#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
227#else /* we must activate GPL5 in the SIUMCR for CAN */
228#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
229#endif /* CONFIG_CAN_DRIVER */
230
231/*-----------------------------------------------------------------------
232 * TBSCR - Time Base Status and Control 11-26
233 *-----------------------------------------------------------------------
234 * Clear Reference Interrupt Status, Timebase freezing enabled
235 */
236#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
237
238/*-----------------------------------------------------------------------
239 * RTCSC - Real-Time Clock Status and Control Register 11-27
240 *-----------------------------------------------------------------------
241 */
242#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
243
244/*-----------------------------------------------------------------------
245 * PISCR - Periodic Interrupt Status and Control 11-31
246 *-----------------------------------------------------------------------
247 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
248 */
249#define CFG_PISCR (PISCR_PS | PISCR_PITF)
250
251/*-----------------------------------------------------------------------
252 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
253 *-----------------------------------------------------------------------
254 * Reset PLL lock status sticky bit, timer expired status bit and timer
255 * interrupt status bit
256 *
257 * If this is a 80 MHz or 100 MHz CPU,
258 * set PLL multiplication factor to 5 (5 * 16 = 80, 5 * 20 = 100)
259 */
260#if defined(CONFIG_80MHz) || defined(CONFIG_100MHz)
261#define CFG_PLPRCR \
262 ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
wdenk69141282003-07-07 20:07:54 +0000263#else /* up to 66 MHz we use a 1:1 clock */
wdenk7a428cc2003-06-15 22:40:42 +0000264#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
265#endif /* CONFIG_80MHz | CONFIG_100MHz */
266
267/*-----------------------------------------------------------------------
268 * SCCR - System Clock and reset Control Register 15-27
269 *-----------------------------------------------------------------------
270 * Set clock output, timebase and RTC source and divider,
271 * power management and some other internal clocks
272 */
273#define SCCR_MASK SCCR_EBDF11
274#if defined(CONFIG_80MHz) || defined(CONFIG_100MHz) /* use 16/20 MHz * 5 */
275#define CFG_SCCR (/* SCCR_TBS | */ \
276 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
277 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
278 SCCR_DFALCD00)
wdenk69141282003-07-07 20:07:54 +0000279#else /* up to 66 MHz we use a 1:1 clock */
wdenk7a428cc2003-06-15 22:40:42 +0000280#define CFG_SCCR (SCCR_TBS | \
281 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
282 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
283 SCCR_DFALCD00)
284#endif /* CONFIG_80MHz | CONFIG_100MHz */
285
286/*-----------------------------------------------------------------------
287 * PCMCIA stuff
288 *-----------------------------------------------------------------------
289 *
290 */
291#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
292#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
293#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
294#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
295#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
296#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
297#define CFG_PCMCIA_IO_ADDR (0xEC000000)
298#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
299
300/*-----------------------------------------------------------------------
301 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
302 *-----------------------------------------------------------------------
303 */
304
305#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
306
307#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
308#undef CONFIG_IDE_LED /* LED for ide not supported */
309#undef CONFIG_IDE_RESET /* reset for ide not supported */
310
311#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
312#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
313
314#define CFG_ATA_IDE0_OFFSET 0x0000
315
316#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
317
318/* Offset for data I/O */
319#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
320
321/* Offset for normal register accesses */
322#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
323
324/* Offset for alternate registers */
325#define CFG_ATA_ALT_OFFSET 0x0100
326
327/*-----------------------------------------------------------------------
328 *
329 *-----------------------------------------------------------------------
330 *
331 */
332#define CFG_DER 0
333
334/*
335 * Init Memory Controller:
336 *
337 * BR0/1 and OR0/1 (FLASH)
338 */
339
340#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
341#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
342
343/* used to re-map FLASH both when starting from SRAM or FLASH:
344 * restrict access enough to keep SRAM working (if any)
345 * but not too much to meddle with FLASH accesses
346 */
347#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
348#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
349
350/*
351 * FLASH timing:
352 */
353#if defined(CONFIG_100MHz)
354/* 100 MHz CPU - 50 MHz bus:
355 * ACS = 01, TRLX = 0, CSNT = 0, SCY = 7, EHTR = 0 */
356#define CFG_OR_TIMING_FLASH (OR_ACS_DIV4 | OR_SCY_7_CLK | OR_BI)
357#elif defined(CONFIG_80MHz)
358/* 80 MHz CPU - 40 MHz bus:
359 * ACS = 00, TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */
360#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | 0 | OR_CSNT_SAM | \
361 OR_SCY_3_CLK | OR_EHTR | OR_BI)
362#elif defined(CONFIG_66MHz)
363/* 66 MHz CPU - 66 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1 */
364#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
365 OR_SCY_3_CLK | OR_EHTR | OR_BI)
366#else /* 50 MHz */
367/* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */
368#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
369 OR_SCY_2_CLK | OR_EHTR | OR_BI)
370#endif /*CONFIG_??MHz */
371
372#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
373#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
374#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
375
376#define CFG_OR1_REMAP CFG_OR0_REMAP
377#define CFG_OR1_PRELIM CFG_OR0_PRELIM
378#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
379
380/*
381 * BR2/3 and OR2/3 (SDRAM)
382 *
383 */
384#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
385#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
386#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
387
388/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
389#define CFG_OR_TIMING_SDRAM 0x00000A00
390
391#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
392#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
393
394#ifndef CONFIG_CAN_DRIVER
395#define CFG_OR3_PRELIM CFG_OR2_PRELIM
396#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
397#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
398#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
399#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
400#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
401#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \
402 BR_PS_8 | BR_MS_UPMB | BR_V )
403#endif /* CONFIG_CAN_DRIVER */
404
405/*
406 * Memory Periodic Timer Prescaler
407 *
408 * The Divider for PTA (refresh timer) configuration is based on an
409 * example SDRAM configuration (64 MBit, one bank). The adjustment to
410 * the number of chip selects (NCS) and the actually needed refresh
411 * rate is done by setting MPTPR.
412 *
413 * PTA is calculated from
414 * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
415 *
416 * gclk CPU clock (not bus clock!)
417 * Trefresh Refresh cycle * 4 (four word bursts used)
418 *
419 * 4096 Rows from SDRAM example configuration
420 * 1000 factor s -> ms
421 * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
422 * 4 Number of refresh cycles per period
423 * 64 Refresh cycle in ms per number of rows
424 * --------------------------------------------
425 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
426 *
427 * 50 MHz => 50.000.000 / Divider = 98
428 * 66 Mhz => 66.000.000 / Divider = 129
429 * 80 Mhz => 80.000.000 / Divider = 156
430 * 100 Mhz => 100.000.000 / Divider = 195
431 */
432#if defined(CONFIG_100MHz)
433#define CFG_MAMR_PTA 195
434#elif defined(CONFIG_80MHz)
435#define CFG_MAMR_PTA 156
436#elif defined(CONFIG_66MHz)
437#define CFG_MAMR_PTA 129
438#else /* 50 MHz */
439#define CFG_MAMR_PTA 98
440#endif /*CONFIG_??MHz */
441
442/*
443 * For 16 MBit, refresh rates could be 31.3 us
444 * (= 64 ms / 2K = 125 / quad bursts).
445 * For a simpler initialization, 15.6 us is used instead.
446 *
447 * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
448 * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
449 */
450#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
451#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
452
453/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
454#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
455#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
456
457/*
458 * MAMR settings for SDRAM
459 */
460
461/* 8 column SDRAM */
462#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
463 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
464 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
465/* 9 column SDRAM */
466#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
467 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
468 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
469
470
471/*
472 * Internal Definitions
473 *
474 * Boot Flags
475 */
476#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
477#define BOOTFLAG_WARM 0x02 /* Software reboot */
478
479#define CONFIG_NET_MULTI
480#define CONFIG_SCC1_ENET
481#define CONFIG_FEC_ENET
482#define CONFIG_ETHPRIME "SCC ETHERNET"
483
484#endif /* __CONFIG_H */