include/configs/x86-common.h

/*
 * Copyright (c) 2011 The Chromium OS Authors.
 * (C) Copyright 2008
 * Graeme Russ, graeme.russ@gmail.com.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <asm/ibmpc.h>

#ifndef __CONFIG_X86_COMMON_H
#define __CONFIG_X86_COMMON_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_ZBOOT_32
#define CONFIG_PHYSMEM
#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_LAST_STAGE_INIT
#define CONFIG_NR_DRAM_BANKS		8

#define CONFIG_LMB

#define CONFIG_LZO
#undef CONFIG_ZLIB
#undef CONFIG_GZIP
#define CONFIG_SYS_BOOTM_LEN		(16 << 20)

/* SATA AHCI storage */

#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
#define CONFIG_LIBATA
#define CONFIG_LBA48
#define CONFIG_SYS_64BIT_LBA

#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)
#endif

/* Generic TPM interfaced through LPC bus */
#define CONFIG_TPM_TIS_BASE_ADDRESS        0xfed40000

/*-----------------------------------------------------------------------
 * Real Time Clock Configuration
 */
#define CONFIG_RTC_MC146818
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS	0
#define CONFIG_SYS_ISA_IO      CONFIG_SYS_ISA_IO_BASE_ADDRESS

/*-----------------------------------------------------------------------
 * Serial Configuration
 */
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{300, 600, 1200, 2400, 4800, \
					 9600, 19200, 38400, 115200}
#define CONFIG_SYS_NS16550_PORT_MAPPED

#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_STDIO_DEREGISTER

#define CONFIG_CMDLINE_EDITING
#define CONFIG_COMMAND_HISTORY
#define CONFIG_AUTO_COMPLETE

#define CONFIG_SUPPORT_VFAT

/************************************************************
 * DISK Partition support
 ************************************************************/
#define CONFIG_EFI_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_MAC_PARTITION
#define CONFIG_ISO_PARTITION		/* Experimental */

#define CONFIG_CMD_PART
#ifdef CONFIG_SYS_COREBOOT
#define CONFIG_CMD_CBFS
#endif
#define CONFIG_PARTITION_UUIDS

#define CONFIG_SYS_CONSOLE_INFO_QUIET

/* x86 GPIOs are accessed through a PCI device */
#define CONFIG_INTEL_ICH6_GPIO

/*-----------------------------------------------------------------------
 * Command line configuration.
 */
#define CONFIG_CMD_DATE
#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_CMD_IO
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PCI
#define CONFIG_CMD_GETTIME
#define CONFIG_CMD_SCSI

#define CONFIG_CMD_ZBOOT

#define CONFIG_BOOTARGS		\
	"root=/dev/sdb3 init=/sbin/init rootwait ro"
#define CONFIG_BOOTCOMMAND	\
	"ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000"

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE			115200
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE			512
#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
						 sizeof(CONFIG_SYS_PROMPT) + \
						 16)
#define CONFIG_SYS_MAXARGS			16
#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START		0x00100000
#define CONFIG_SYS_MEMTEST_END			0x01000000
#define CONFIG_SYS_LOAD_ADDR			0x20000000

/*-----------------------------------------------------------------------
 * Video Configuration
 */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_SW_CURSOR
#define VIDEO_FB_16BPP_WORD_SWAP
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_CFB_CONSOLE
#define CONFIG_CONSOLE_SCROLL_LINES 5

/*-----------------------------------------------------------------------
 * CPU Features
 */

#define CONFIG_SYS_STACK_SIZE			(32 * 1024)
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN			0x200000

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/*-----------------------------------------------------------------------
 * FLASH configuration
 */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CMD_SF_TEST
#define CONFIG_SPI

/*-----------------------------------------------------------------------
 * Environment configuration
 */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE			0x01000

/*-----------------------------------------------------------------------
 * PCI configuration
 */
#define CONFIG_PCI
#define CONFIG_PCI_CONFIG_HOST_BRIDGE

/*-----------------------------------------------------------------------
 * USB configuration
 */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_PCI
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     12
#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
#define CONFIG_USB_STORAGE
#define CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL

#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_TFTP_TSIZE
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/* Default environment */
#define CONFIG_ROOTPATH		"/opt/nfsroot"
#define CONFIG_HOSTNAME		x86
#define CONFIG_BOOTFILE		"bzImage"
#define CONFIG_LOADADDR		0x1000000
#define CONFIG_RAMDISK_ADDR		0x4000000

#define CONFIG_EXTRA_ENV_SETTINGS			\
	CONFIG_STD_DEVICES_SETTINGS			\
	"pciconfighost=1\0"				\
	"netdev=eth0\0"					\
	"consoledev=ttyS0\0"				\
	"othbootargs=acpi=off\0"			\
	"ramdiskaddr=0x4000000\0"			\
	"ramdiskfile=initramfs.gz\0"

#define CONFIG_RAMBOOTCOMMAND				\
	"setenv bootargs root=/dev/ram rw "		\
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	"console=$consoledev,$baudrate $othbootargs;"	\
	"tftpboot $loadaddr $bootfile;"			\
	"tftpboot $ramdiskaddr $ramdiskfile;"		\
	"zboot $loadaddr 0 $ramdiskaddr $filesize"

#define CONFIG_NFSBOOTCOMMAND				\
	"setenv bootargs root=/dev/nfs rw "		\
	"nfsroot=$serverip:$rootpath "			\
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	"console=$consoledev,$baudrate $othbootargs;"	\
	"tftpboot $loadaddr $bootfile;"			\
	"zboot $loadaddr"

#define CONFIG_BOOTDELAY	2

#endif	/* __CONFIG_H */