Jonas Karlman | 5d65a07 | 2024-07-31 07:28:53 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | |
| 3 | /dts-v1/; |
| 4 | |
| 5 | #include <dt-bindings/gpio/gpio.h> |
| 6 | #include <dt-bindings/leds/common.h> |
| 7 | #include <dt-bindings/pinctrl/rockchip.h> |
| 8 | #include <dt-bindings/soc/rockchip,vop2.h> |
| 9 | #include "rk3568.dtsi" |
| 10 | |
| 11 | / { |
| 12 | model = "Radxa ROCK 3B"; |
| 13 | compatible = "radxa,rock-3b", "rockchip,rk3568"; |
| 14 | |
| 15 | aliases { |
| 16 | ethernet0 = &gmac0; |
| 17 | ethernet1 = &gmac1; |
| 18 | mmc0 = &sdhci; |
| 19 | mmc1 = &sdmmc0; |
| 20 | mmc2 = &sdmmc2; |
| 21 | }; |
| 22 | |
| 23 | chosen { |
| 24 | stdout-path = "serial2:1500000n8"; |
| 25 | }; |
| 26 | |
| 27 | hdmi-con { |
| 28 | compatible = "hdmi-connector"; |
| 29 | type = "a"; |
| 30 | |
| 31 | port { |
| 32 | hdmi_con_in: endpoint { |
| 33 | remote-endpoint = <&hdmi_out_con>; |
| 34 | }; |
| 35 | }; |
| 36 | }; |
| 37 | |
| 38 | ir-receiver { |
| 39 | compatible = "gpio-ir-receiver"; |
| 40 | gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; |
| 41 | pinctrl-names = "default"; |
| 42 | pinctrl-0 = <&pwm3_ir>; |
| 43 | }; |
| 44 | |
| 45 | leds { |
| 46 | compatible = "gpio-leds"; |
| 47 | pinctrl-names = "default"; |
| 48 | pinctrl-0 = <&led>; |
| 49 | |
| 50 | led-0 { |
| 51 | color = <LED_COLOR_ID_GREEN>; |
| 52 | default-state = "on"; |
| 53 | function = LED_FUNCTION_HEARTBEAT; |
| 54 | gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 55 | linux,default-trigger = "heartbeat"; |
| 56 | }; |
| 57 | }; |
| 58 | |
| 59 | /* pi6c pcie clock generator */ |
| 60 | vcc3v3_pi6c_03: regulator-3v3-vcc-pi6c-03 { |
| 61 | compatible = "regulator-fixed"; |
| 62 | enable-active-high; |
| 63 | gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; |
| 64 | pinctrl-names = "default"; |
| 65 | pinctrl-0 = <&pcie_pwren_h>; |
| 66 | regulator-name = "vcc3v3_pi6c_03"; |
| 67 | regulator-always-on; |
| 68 | regulator-boot-on; |
| 69 | regulator-min-microvolt = <3300000>; |
| 70 | regulator-max-microvolt = <3300000>; |
| 71 | startup-delay-us = <10000>; |
| 72 | vin-supply = <&vcc5v0_sys>; |
| 73 | }; |
| 74 | |
| 75 | vcc3v3_sys: regulator-3v3-vcc-sys { |
| 76 | compatible = "regulator-fixed"; |
| 77 | regulator-name = "vcc3v3_sys"; |
| 78 | regulator-always-on; |
| 79 | regulator-boot-on; |
| 80 | regulator-min-microvolt = <3300000>; |
| 81 | regulator-max-microvolt = <3300000>; |
| 82 | vin-supply = <&vcc5v0_sys>; |
| 83 | }; |
| 84 | |
| 85 | vcc3v3_sys2: regulator-3v3-vcc-sys2 { |
| 86 | compatible = "regulator-fixed"; |
| 87 | regulator-name = "vcc3v3_sys2"; |
| 88 | regulator-always-on; |
| 89 | regulator-boot-on; |
| 90 | regulator-min-microvolt = <3300000>; |
| 91 | regulator-max-microvolt = <3300000>; |
| 92 | vin-supply = <&vcc5v0_sys>; |
| 93 | }; |
| 94 | |
| 95 | vcc5v0_sys: regulator-5v0-vcc-sys { |
| 96 | compatible = "regulator-fixed"; |
| 97 | regulator-name = "vcc5v0_sys"; |
| 98 | regulator-always-on; |
| 99 | regulator-boot-on; |
| 100 | regulator-min-microvolt = <5000000>; |
| 101 | regulator-max-microvolt = <5000000>; |
| 102 | }; |
| 103 | |
| 104 | vcc5v0_usb_host: regulator-5v0-vcc-usb-host { |
| 105 | compatible = "regulator-fixed"; |
| 106 | enable-active-high; |
| 107 | gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 108 | pinctrl-names = "default"; |
| 109 | pinctrl-0 = <&usb_host_pwren_h>; |
| 110 | regulator-name = "vcc5v0_usb_host"; |
| 111 | regulator-min-microvolt = <5000000>; |
| 112 | regulator-max-microvolt = <5000000>; |
| 113 | vin-supply = <&vcc5v0_sys>; |
| 114 | }; |
| 115 | |
| 116 | vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg { |
| 117 | compatible = "regulator-fixed"; |
| 118 | enable-active-high; |
| 119 | gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 120 | pinctrl-names = "default"; |
| 121 | pinctrl-0 = <&usb_otg_pwren_h>; |
| 122 | regulator-name = "vcc5v0_usb_otg"; |
| 123 | regulator-min-microvolt = <5000000>; |
| 124 | regulator-max-microvolt = <5000000>; |
| 125 | vin-supply = <&vcc5v0_sys>; |
| 126 | }; |
| 127 | |
| 128 | sdio_pwrseq: sdio-pwrseq { |
| 129 | compatible = "mmc-pwrseq-simple"; |
| 130 | clocks = <&rk809 1>; |
| 131 | clock-names = "ext_clock"; |
| 132 | pinctrl-names = "default"; |
| 133 | pinctrl-0 = <&wifi_reg_on_h>; |
| 134 | post-power-on-delay-ms = <100>; |
| 135 | power-off-delay-us = <5000000>; |
| 136 | reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; |
| 137 | }; |
| 138 | |
| 139 | sound { |
| 140 | compatible = "simple-audio-card"; |
| 141 | simple-audio-card,format = "i2s"; |
| 142 | simple-audio-card,name = "Analog RK809"; |
| 143 | simple-audio-card,mclk-fs = <256>; |
| 144 | |
| 145 | simple-audio-card,cpu { |
| 146 | sound-dai = <&i2s1_8ch>; |
| 147 | }; |
| 148 | |
| 149 | simple-audio-card,codec { |
| 150 | sound-dai = <&rk809>; |
| 151 | }; |
| 152 | }; |
| 153 | }; |
| 154 | |
| 155 | &combphy0 { |
| 156 | status = "okay"; |
| 157 | }; |
| 158 | |
| 159 | &combphy1 { |
| 160 | status = "okay"; |
| 161 | }; |
| 162 | |
| 163 | &combphy2 { |
| 164 | status = "okay"; |
| 165 | }; |
| 166 | |
| 167 | &cpu0 { |
| 168 | cpu-supply = <&vdd_cpu>; |
| 169 | }; |
| 170 | |
| 171 | &cpu1 { |
| 172 | cpu-supply = <&vdd_cpu>; |
| 173 | }; |
| 174 | |
| 175 | &cpu2 { |
| 176 | cpu-supply = <&vdd_cpu>; |
| 177 | }; |
| 178 | |
| 179 | &cpu3 { |
| 180 | cpu-supply = <&vdd_cpu>; |
| 181 | }; |
| 182 | |
| 183 | &gmac0 { |
| 184 | assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; |
| 185 | assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; |
| 186 | clock_in_out = "input"; |
| 187 | phy-handle = <&rgmii_phy0>; |
| 188 | phy-mode = "rgmii-id"; |
| 189 | phy-supply = <&vcc_3v3>; |
| 190 | pinctrl-names = "default"; |
| 191 | pinctrl-0 = <&gmac0_miim |
| 192 | &gmac0_tx_bus2 |
| 193 | &gmac0_rx_bus2 |
| 194 | &gmac0_rgmii_clk |
| 195 | &gmac0_rgmii_bus |
| 196 | &gmac0_clkinout>; |
| 197 | status = "okay"; |
| 198 | }; |
| 199 | |
| 200 | &gmac1 { |
| 201 | assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; |
| 202 | assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; |
| 203 | clock_in_out = "input"; |
| 204 | phy-handle = <&rgmii_phy1>; |
| 205 | phy-mode = "rgmii-id"; |
| 206 | phy-supply = <&vcc_3v3>; |
| 207 | pinctrl-names = "default"; |
| 208 | pinctrl-0 = <&gmac1m1_miim |
| 209 | &gmac1m1_tx_bus2 |
| 210 | &gmac1m1_rx_bus2 |
| 211 | &gmac1m1_rgmii_clk |
| 212 | &gmac1m1_rgmii_bus |
| 213 | &gmac1m1_clkinout>; |
| 214 | status = "okay"; |
| 215 | }; |
| 216 | |
| 217 | &gpu { |
| 218 | mali-supply = <&vdd_gpu>; |
| 219 | status = "okay"; |
| 220 | }; |
| 221 | |
| 222 | &hdmi { |
| 223 | avdd-0v9-supply = <&vdda0v9_image>; |
| 224 | avdd-1v8-supply = <&vcca1v8_image>; |
| 225 | status = "okay"; |
| 226 | }; |
| 227 | |
| 228 | &hdmi_in { |
| 229 | hdmi_in_vp0: endpoint { |
| 230 | remote-endpoint = <&vp0_out_hdmi>; |
| 231 | }; |
| 232 | }; |
| 233 | |
| 234 | &hdmi_out { |
| 235 | hdmi_out_con: endpoint { |
| 236 | remote-endpoint = <&hdmi_con_in>; |
| 237 | }; |
| 238 | }; |
| 239 | |
| 240 | &hdmi_sound { |
| 241 | status = "okay"; |
| 242 | }; |
| 243 | |
| 244 | &i2c0 { |
| 245 | status = "okay"; |
| 246 | |
| 247 | vdd_cpu: regulator@1c { |
| 248 | compatible = "tcs,tcs4525"; |
| 249 | reg = <0x1c>; |
| 250 | fcs,suspend-voltage-selector = <1>; |
| 251 | regulator-name = "vdd_cpu"; |
| 252 | regulator-always-on; |
| 253 | regulator-boot-on; |
| 254 | regulator-min-microvolt = <800000>; |
| 255 | regulator-max-microvolt = <1150000>; |
| 256 | regulator-ramp-delay = <2300>; |
| 257 | vin-supply = <&vcc5v0_sys>; |
| 258 | |
| 259 | regulator-state-mem { |
| 260 | regulator-off-in-suspend; |
| 261 | }; |
| 262 | }; |
| 263 | |
| 264 | rk809: pmic@20 { |
| 265 | compatible = "rockchip,rk809"; |
| 266 | reg = <0x20>; |
| 267 | assigned-clocks = <&cru I2S1_MCLKOUT_TX>; |
| 268 | assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; |
| 269 | #clock-cells = <1>; |
| 270 | clocks = <&cru I2S1_MCLKOUT_TX>; |
| 271 | clock-names = "mclk"; |
| 272 | clock-output-names = "rk809-clkout1", "rk809-clkout2"; |
| 273 | interrupt-parent = <&gpio0>; |
| 274 | interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| 275 | pinctrl-names = "default"; |
| 276 | pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; |
| 277 | #sound-dai-cells = <0>; |
| 278 | system-power-controller; |
| 279 | wakeup-source; |
| 280 | |
| 281 | vcc1-supply = <&vcc3v3_sys>; |
| 282 | vcc2-supply = <&vcc3v3_sys>; |
| 283 | vcc3-supply = <&vcc3v3_sys>; |
| 284 | vcc4-supply = <&vcc3v3_sys>; |
| 285 | vcc5-supply = <&vcc3v3_sys>; |
| 286 | vcc6-supply = <&vcc3v3_sys>; |
| 287 | vcc7-supply = <&vcc3v3_sys>; |
| 288 | vcc8-supply = <&vcc3v3_sys>; |
| 289 | vcc9-supply = <&vcc3v3_sys>; |
| 290 | |
| 291 | regulators { |
| 292 | vdd_logic: DCDC_REG1 { |
| 293 | regulator-name = "vdd_logic"; |
| 294 | regulator-always-on; |
| 295 | regulator-boot-on; |
| 296 | regulator-initial-mode = <0x2>; |
| 297 | regulator-min-microvolt = <500000>; |
| 298 | regulator-max-microvolt = <1350000>; |
| 299 | regulator-ramp-delay = <6001>; |
| 300 | |
| 301 | regulator-state-mem { |
| 302 | regulator-off-in-suspend; |
| 303 | }; |
| 304 | }; |
| 305 | |
| 306 | vdd_gpu: DCDC_REG2 { |
| 307 | regulator-name = "vdd_gpu"; |
| 308 | regulator-always-on; |
| 309 | regulator-boot-on; |
| 310 | regulator-initial-mode = <0x2>; |
| 311 | regulator-min-microvolt = <500000>; |
| 312 | regulator-max-microvolt = <1350000>; |
| 313 | regulator-ramp-delay = <6001>; |
| 314 | |
| 315 | regulator-state-mem { |
| 316 | regulator-off-in-suspend; |
| 317 | }; |
| 318 | }; |
| 319 | |
| 320 | vcc_ddr: DCDC_REG3 { |
| 321 | regulator-name = "vcc_ddr"; |
| 322 | regulator-always-on; |
| 323 | regulator-boot-on; |
| 324 | regulator-initial-mode = <0x2>; |
| 325 | |
| 326 | regulator-state-mem { |
| 327 | regulator-on-in-suspend; |
| 328 | }; |
| 329 | }; |
| 330 | |
| 331 | vdd_npu: DCDC_REG4 { |
| 332 | regulator-name = "vdd_npu"; |
| 333 | regulator-initial-mode = <0x2>; |
| 334 | regulator-min-microvolt = <500000>; |
| 335 | regulator-max-microvolt = <1350000>; |
| 336 | regulator-ramp-delay = <6001>; |
| 337 | |
| 338 | regulator-state-mem { |
| 339 | regulator-off-in-suspend; |
| 340 | }; |
| 341 | }; |
| 342 | |
| 343 | vcc_1v8: DCDC_REG5 { |
| 344 | regulator-name = "vcc_1v8"; |
| 345 | regulator-always-on; |
| 346 | regulator-boot-on; |
| 347 | regulator-min-microvolt = <1800000>; |
| 348 | regulator-max-microvolt = <1800000>; |
| 349 | |
| 350 | regulator-state-mem { |
| 351 | regulator-off-in-suspend; |
| 352 | }; |
| 353 | }; |
| 354 | |
| 355 | vdda0v9_image: LDO_REG1 { |
| 356 | regulator-name = "vdda0v9_image"; |
| 357 | regulator-min-microvolt = <900000>; |
| 358 | regulator-max-microvolt = <900000>; |
| 359 | |
| 360 | regulator-state-mem { |
| 361 | regulator-off-in-suspend; |
| 362 | }; |
| 363 | }; |
| 364 | |
| 365 | vdda_0v9: LDO_REG2 { |
| 366 | regulator-name = "vdda_0v9"; |
| 367 | regulator-always-on; |
| 368 | regulator-boot-on; |
| 369 | regulator-min-microvolt = <900000>; |
| 370 | regulator-max-microvolt = <900000>; |
| 371 | |
| 372 | regulator-state-mem { |
| 373 | regulator-off-in-suspend; |
| 374 | }; |
| 375 | }; |
| 376 | |
| 377 | vdda0v9_pmu: LDO_REG3 { |
| 378 | regulator-name = "vdda0v9_pmu"; |
| 379 | regulator-always-on; |
| 380 | regulator-boot-on; |
| 381 | regulator-min-microvolt = <900000>; |
| 382 | regulator-max-microvolt = <900000>; |
| 383 | |
| 384 | regulator-state-mem { |
| 385 | regulator-on-in-suspend; |
| 386 | regulator-suspend-microvolt = <900000>; |
| 387 | }; |
| 388 | }; |
| 389 | |
| 390 | vccio_acodec: LDO_REG4 { |
| 391 | regulator-name = "vccio_acodec"; |
| 392 | regulator-always-on; |
| 393 | regulator-boot-on; |
| 394 | regulator-min-microvolt = <3300000>; |
| 395 | regulator-max-microvolt = <3300000>; |
| 396 | |
| 397 | regulator-state-mem { |
| 398 | regulator-off-in-suspend; |
| 399 | }; |
| 400 | }; |
| 401 | |
| 402 | vccio_sd: LDO_REG5 { |
| 403 | regulator-name = "vccio_sd"; |
| 404 | regulator-always-on; |
| 405 | regulator-boot-on; |
| 406 | regulator-min-microvolt = <1800000>; |
| 407 | regulator-max-microvolt = <3300000>; |
| 408 | |
| 409 | regulator-state-mem { |
| 410 | regulator-off-in-suspend; |
| 411 | }; |
| 412 | }; |
| 413 | |
| 414 | vcc3v3_pmu: LDO_REG6 { |
| 415 | regulator-name = "vcc3v3_pmu"; |
| 416 | regulator-always-on; |
| 417 | regulator-boot-on; |
| 418 | regulator-min-microvolt = <3300000>; |
| 419 | regulator-max-microvolt = <3300000>; |
| 420 | |
| 421 | regulator-state-mem { |
| 422 | regulator-on-in-suspend; |
| 423 | regulator-suspend-microvolt = <3300000>; |
| 424 | }; |
| 425 | }; |
| 426 | |
| 427 | vcca_1v8: LDO_REG7 { |
| 428 | regulator-name = "vcca_1v8"; |
| 429 | regulator-always-on; |
| 430 | regulator-boot-on; |
| 431 | regulator-min-microvolt = <1800000>; |
| 432 | regulator-max-microvolt = <1800000>; |
| 433 | |
| 434 | regulator-state-mem { |
| 435 | regulator-off-in-suspend; |
| 436 | }; |
| 437 | }; |
| 438 | |
| 439 | vcca1v8_pmu: LDO_REG8 { |
| 440 | regulator-name = "vcca1v8_pmu"; |
| 441 | regulator-always-on; |
| 442 | regulator-boot-on; |
| 443 | regulator-min-microvolt = <1800000>; |
| 444 | regulator-max-microvolt = <1800000>; |
| 445 | |
| 446 | regulator-state-mem { |
| 447 | regulator-on-in-suspend; |
| 448 | regulator-suspend-microvolt = <1800000>; |
| 449 | }; |
| 450 | }; |
| 451 | |
| 452 | vcca1v8_image: LDO_REG9 { |
| 453 | regulator-name = "vcca1v8_image"; |
| 454 | regulator-min-microvolt = <1800000>; |
| 455 | regulator-max-microvolt = <1800000>; |
| 456 | |
| 457 | regulator-state-mem { |
| 458 | regulator-off-in-suspend; |
| 459 | }; |
| 460 | }; |
| 461 | |
| 462 | vcc_3v3: SWITCH_REG1 { |
| 463 | regulator-name = "vcc_3v3"; |
| 464 | regulator-always-on; |
| 465 | regulator-boot-on; |
| 466 | |
| 467 | regulator-state-mem { |
| 468 | regulator-off-in-suspend; |
| 469 | }; |
| 470 | }; |
| 471 | |
| 472 | vcc3v3_sd: SWITCH_REG2 { |
| 473 | regulator-name = "vcc3v3_sd"; |
| 474 | regulator-always-on; |
| 475 | regulator-boot-on; |
| 476 | |
| 477 | regulator-state-mem { |
| 478 | regulator-off-in-suspend; |
| 479 | }; |
| 480 | }; |
| 481 | }; |
| 482 | }; |
| 483 | }; |
| 484 | |
| 485 | &i2c5 { |
| 486 | status = "okay"; |
| 487 | |
| 488 | hym8563: rtc@51 { |
| 489 | compatible = "haoyu,hym8563"; |
| 490 | reg = <0x51>; |
| 491 | interrupt-parent = <&gpio0>; |
| 492 | interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; |
| 493 | #clock-cells = <0>; |
| 494 | clock-output-names = "rtcic_32kout"; |
| 495 | pinctrl-names = "default"; |
| 496 | pinctrl-0 = <&rtcic_int_l>; |
| 497 | wakeup-source; |
| 498 | }; |
| 499 | }; |
| 500 | |
| 501 | &i2s0_8ch { |
| 502 | status = "okay"; |
| 503 | }; |
| 504 | |
| 505 | &i2s1_8ch { |
| 506 | pinctrl-names = "default"; |
| 507 | pinctrl-0 = <&i2s1m0_sclktx |
| 508 | &i2s1m0_lrcktx |
| 509 | &i2s1m0_sdi0 |
| 510 | &i2s1m0_sdo0>; |
| 511 | rockchip,trcm-sync-tx-only; |
| 512 | status = "okay"; |
| 513 | }; |
| 514 | |
| 515 | &mdio0 { |
| 516 | rgmii_phy0: ethernet-phy@1 { |
| 517 | compatible = "ethernet-phy-ieee802.3-c22"; |
| 518 | reg = <1>; |
| 519 | reset-assert-us = <20000>; |
| 520 | reset-deassert-us = <50000>; |
| 521 | reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; |
| 522 | }; |
| 523 | }; |
| 524 | |
| 525 | &mdio1 { |
| 526 | rgmii_phy1: ethernet-phy@1 { |
| 527 | compatible = "ethernet-phy-ieee802.3-c22"; |
| 528 | reg = <1>; |
| 529 | reset-assert-us = <20000>; |
| 530 | reset-deassert-us = <50000>; |
| 531 | reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; |
| 532 | }; |
| 533 | }; |
| 534 | |
| 535 | &pcie2x1 { |
| 536 | pinctrl-names = "default"; |
| 537 | pinctrl-0 = <&pcie20m1_pins>; |
| 538 | reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; |
| 539 | vpcie3v3-supply = <&vcc3v3_sys2>; |
| 540 | status = "okay"; |
| 541 | }; |
| 542 | |
| 543 | &pcie30phy { |
| 544 | status = "okay"; |
| 545 | }; |
| 546 | |
| 547 | &pcie3x2 { |
| 548 | pinctrl-names = "default"; |
| 549 | pinctrl-0 = <&pcie30x2m1_pins>; |
| 550 | reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; |
| 551 | status = "okay"; |
| 552 | }; |
| 553 | |
| 554 | &pinctrl { |
| 555 | bluetooth { |
| 556 | bt_reg_on_h: bt-reg-on-h { |
| 557 | rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 558 | }; |
| 559 | |
| 560 | bt_wake_host_h: bt-wake-host-h { |
| 561 | rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 562 | }; |
| 563 | |
| 564 | host_wake_bt_h: host-wake-bt-h { |
| 565 | rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 566 | }; |
| 567 | }; |
| 568 | |
| 569 | ir-receiver { |
| 570 | pwm3_ir: pwm3-ir { |
| 571 | rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 572 | }; |
| 573 | }; |
| 574 | |
| 575 | leds { |
| 576 | led: led { |
| 577 | rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 578 | }; |
| 579 | }; |
| 580 | |
| 581 | pcie { |
| 582 | pcie_pwren_h: pcie-pwren-h { |
| 583 | rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 584 | }; |
| 585 | }; |
| 586 | |
| 587 | pcie20 { |
| 588 | pcie20m1_pins: pcie20m1-pins { |
| 589 | rockchip,pins = |
| 590 | <2 RK_PD0 4 &pcfg_pull_none>, |
| 591 | <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>, |
| 592 | <2 RK_PD1 4 &pcfg_pull_none>; |
| 593 | }; |
| 594 | }; |
| 595 | |
| 596 | pcie30x2 { |
| 597 | pcie30x2m1_pins: pcie30x2m1-pins { |
| 598 | rockchip,pins = |
| 599 | <2 RK_PD4 4 &pcfg_pull_none>, |
| 600 | <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>, |
| 601 | <2 RK_PD5 4 &pcfg_pull_none>; |
| 602 | }; |
| 603 | }; |
| 604 | |
| 605 | pmic { |
| 606 | pmic_int_l: pmic-int-l { |
| 607 | rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 608 | }; |
| 609 | }; |
| 610 | |
| 611 | rtc { |
| 612 | rtcic_int_l: rtcic-int-l { |
| 613 | rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 614 | }; |
| 615 | }; |
| 616 | |
| 617 | usb { |
| 618 | usb_host_pwren_h: usb-host-pwren-h { |
| 619 | rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 620 | }; |
| 621 | |
| 622 | usb_otg_pwren_h: usb-otg-pwren-h { |
| 623 | rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 624 | }; |
| 625 | }; |
| 626 | |
| 627 | wifi { |
| 628 | wifi_reg_on_h: wifi-reg-on-h { |
| 629 | rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 630 | }; |
| 631 | |
| 632 | wifi_wake_host_h: wifi-wake-host-h { |
| 633 | rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 634 | }; |
| 635 | }; |
| 636 | }; |
| 637 | |
| 638 | &pmu_io_domains { |
| 639 | pmuio1-supply = <&vcc3v3_pmu>; |
| 640 | pmuio2-supply = <&vcc3v3_pmu>; |
| 641 | vccio1-supply = <&vccio_acodec>; |
| 642 | vccio2-supply = <&vcc_1v8>; |
| 643 | vccio3-supply = <&vccio_sd>; |
| 644 | vccio4-supply = <&vcc_1v8>; |
| 645 | vccio5-supply = <&vcc_3v3>; |
| 646 | vccio6-supply = <&vcc_1v8>; |
| 647 | vccio7-supply = <&vcc_3v3>; |
| 648 | status = "okay"; |
| 649 | }; |
| 650 | |
| 651 | &saradc { |
| 652 | vref-supply = <&vcca_1v8>; |
| 653 | status = "okay"; |
| 654 | }; |
| 655 | |
| 656 | &sdhci { |
| 657 | bus-width = <8>; |
| 658 | cap-mmc-highspeed; |
| 659 | max-frequency = <200000000>; |
| 660 | mmc-hs200-1_8v; |
| 661 | non-removable; |
| 662 | pinctrl-names = "default"; |
| 663 | pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; |
| 664 | vmmc-supply = <&vcc_3v3>; |
| 665 | vqmmc-supply = <&vcc_1v8>; |
| 666 | status = "okay"; |
| 667 | }; |
| 668 | |
| 669 | &sdmmc0 { |
| 670 | bus-width = <4>; |
| 671 | cap-sd-highspeed; |
| 672 | disable-wp; |
| 673 | pinctrl-names = "default"; |
| 674 | pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| 675 | vmmc-supply = <&vcc3v3_sd>; |
| 676 | vqmmc-supply = <&vccio_sd>; |
| 677 | status = "okay"; |
| 678 | }; |
| 679 | |
| 680 | &sdmmc2 { |
| 681 | bus-width = <4>; |
| 682 | cap-sd-highspeed; |
| 683 | cap-sdio-irq; |
| 684 | keep-power-in-suspend; |
| 685 | mmc-pwrseq = <&sdio_pwrseq>; |
| 686 | non-removable; |
| 687 | pinctrl-names = "default"; |
| 688 | pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_clk &sdmmc2m0_cmd>; |
| 689 | sd-uhs-sdr104; |
| 690 | vmmc-supply = <&vcc3v3_sys2>; |
| 691 | vqmmc-supply = <&vcc_1v8>; |
| 692 | status = "disabled"; |
| 693 | }; |
| 694 | |
| 695 | &sfc { |
| 696 | #address-cells = <1>; |
| 697 | #size-cells = <0>; |
| 698 | status = "okay"; |
| 699 | |
| 700 | flash@0 { |
| 701 | compatible = "jedec,spi-nor"; |
| 702 | reg = <0>; |
| 703 | spi-max-frequency = <104000000>; |
| 704 | spi-rx-bus-width = <4>; |
| 705 | spi-tx-bus-width = <1>; |
| 706 | }; |
| 707 | }; |
| 708 | |
| 709 | &tsadc { |
| 710 | rockchip,hw-tshut-mode = <1>; |
| 711 | rockchip,hw-tshut-polarity = <0>; |
| 712 | status = "okay"; |
| 713 | }; |
| 714 | |
| 715 | &uart2 { |
| 716 | status = "okay"; |
| 717 | }; |
| 718 | |
| 719 | &uart8 { |
| 720 | pinctrl-names = "default"; |
| 721 | pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn &uart8m0_rtsn>; |
| 722 | uart-has-rtscts; |
| 723 | status = "disabled"; |
| 724 | }; |
| 725 | |
| 726 | &usb_host0_ehci { |
| 727 | status = "okay"; |
| 728 | }; |
| 729 | |
| 730 | &usb_host0_ohci { |
| 731 | status = "okay"; |
| 732 | }; |
| 733 | |
| 734 | &usb_host0_xhci { |
| 735 | extcon = <&usb2phy0>; |
| 736 | status = "okay"; |
| 737 | }; |
| 738 | |
| 739 | &usb_host1_xhci { |
| 740 | status = "okay"; |
| 741 | }; |
| 742 | |
| 743 | &usb2phy0 { |
| 744 | status = "okay"; |
| 745 | }; |
| 746 | |
| 747 | &usb2phy0_host { |
| 748 | phy-supply = <&vcc5v0_usb_host>; |
| 749 | status = "okay"; |
| 750 | }; |
| 751 | |
| 752 | &usb2phy0_otg { |
| 753 | phy-supply = <&vcc5v0_usb_otg>; |
| 754 | status = "okay"; |
| 755 | }; |
| 756 | |
| 757 | &usb2phy1 { |
| 758 | status = "okay"; |
| 759 | }; |
| 760 | |
| 761 | &usb2phy1_otg { |
| 762 | phy-supply = <&vcc5v0_usb_host>; |
| 763 | status = "okay"; |
| 764 | }; |
| 765 | |
| 766 | &vop { |
| 767 | assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 768 | assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 769 | status = "okay"; |
| 770 | }; |
| 771 | |
| 772 | &vop_mmu { |
| 773 | status = "okay"; |
| 774 | }; |
| 775 | |
| 776 | &vp0 { |
| 777 | vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 778 | reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 779 | remote-endpoint = <&hdmi_in_vp0>; |
| 780 | }; |
| 781 | }; |