blob: 8fa7d9f3b5c504bd62105f3218941992f7636163 [file] [log] [blame]
Mike Frysinger66c4cf42008-02-04 19:26:55 -05001/*
2 * TWI Masks
3 */
4
5#ifndef __BFIN_PERIPHERAL_TWI__
6#define __BFIN_PERIPHERAL_TWI__
7
8/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
9#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
10#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
11
12/* TWI_PRESCALE Masks */
13#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
14#define TWI_ENA 0x0080 /* TWI Enable */
15#define SCCB 0x0200 /* SCCB Compatibility Enable */
16
17/* TWI_SLAVE_CTL Masks */
18#define SEN 0x0001 /* Slave Enable */
19#define SADD_LEN 0x0002 /* Slave Address Length */
20#define STDVAL 0x0004 /* Slave Transmit Data Valid */
21#define TSC_NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
22#define GEN 0x0010 /* General Call Adrress Matching Enabled */
23
24/* TWI_SLAVE_STAT Masks */
25#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
26#define GCALL 0x0002 /* General Call Indicator */
27
28/* TWI_MASTER_CTRL Masks */
29#define MEN 0x0001 /* Master Mode Enable */
30#define MADD_LEN 0x0002 /* Master Address Length */
31#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
32#define FAST 0x0008 /* Use Fast Mode Timing Specs */
33#define STOP 0x0010 /* Issue Stop Condition */
34#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
35#define DCNT 0x3FC0 /* Data Bytes To Transfer */
36#define SDAOVR 0x4000 /* Serial Data Override */
37#define SCLOVR 0x8000 /* Serial Clock Override */
38
39/* TWI_MASTER_STAT Masks */
40#define MPROG 0x0001 /* Master Transfer In Progress */
41#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
42#define ANAK 0x0004 /* Address Not Acknowledged */
43#define DNAK 0x0008 /* Data Not Acknowledged */
44#define BUFRDERR 0x0010 /* Buffer Read Error */
45#define BUFWRERR 0x0020 /* Buffer Write Error */
46#define SDASEN 0x0040 /* Serial Data Sense */
47#define SCLSEN 0x0080 /* Serial Clock Sense */
48#define BUSBUSY 0x0100 /* Bus Busy Indicator */
49
50/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
51#define SINIT 0x0001 /* Slave Transfer Initiated */
52#define SCOMP 0x0002 /* Slave Transfer Complete */
53#define SERR 0x0004 /* Slave Transfer Error */
54#define SOVF 0x0008 /* Slave Overflow */
55#define MCOMP 0x0010 /* Master Transfer Complete */
56#define MERR 0x0020 /* Master Transfer Error */
57#define XMTSERV 0x0040 /* Transmit FIFO Service */
58#define RCVSERV 0x0080 /* Receive FIFO Service */
59
60/* TWI_FIFO_CTRL Masks */
61#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
62#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
63#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
64#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
65
66/* TWI_FIFO_STAT Masks */
67#define XMTSTAT 0x0003 /* Transmit FIFO Status */
68#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
69#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
70#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
71
72#define RCVSTAT 0x000C /* Receive FIFO Status */
73#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
74#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
75#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
76
77#endif