| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | // Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| 3 | |
| 4 | #include <dt-bindings/gpio/gpio.h> |
| 5 | #include "qcom-ipq4019-ap.dk07.1.dtsi" |
| 6 | |
| 7 | / { |
| 8 | model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1"; |
| 9 | compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019"; |
| 10 | |
| 11 | soc { |
| 12 | pci@40000000 { |
| 13 | status = "okay"; |
| 14 | perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; |
| 15 | }; |
| 16 | |
| 17 | spi@78b6000 { |
| 18 | status = "okay"; |
| 19 | }; |
| 20 | |
| 21 | pinctrl@1000000 { |
| 22 | serial_1_pins: serial1-pinmux { |
| 23 | pins = "gpio8", "gpio9", |
| 24 | "gpio10", "gpio11"; |
| 25 | function = "blsp_uart1"; |
| 26 | bias-disable; |
| 27 | }; |
| 28 | |
| 29 | spi_0_pins: spi-0-pinmux { |
| 30 | pinmux { |
| 31 | function = "blsp_spi0"; |
| 32 | pins = "gpio13", "gpio14", "gpio15"; |
| 33 | bias-disable; |
| 34 | }; |
| 35 | pinmux_cs { |
| 36 | function = "gpio"; |
| 37 | pins = "gpio12"; |
| 38 | bias-disable; |
| 39 | output-high; |
| 40 | }; |
| 41 | }; |
| 42 | }; |
| 43 | |
| 44 | serial@78b0000 { |
| 45 | pinctrl-0 = <&serial_1_pins>; |
| 46 | pinctrl-names = "default"; |
| 47 | status = "okay"; |
| 48 | }; |
| 49 | |
| 50 | spi@78b5000 { |
| 51 | pinctrl-0 = <&spi_0_pins>; |
| 52 | pinctrl-names = "default"; |
| 53 | status = "okay"; |
| 54 | cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; |
| 55 | |
| 56 | flash@0 { |
| 57 | #address-cells = <1>; |
| 58 | #size-cells = <1>; |
| 59 | reg = <0>; |
| 60 | compatible = "micron,n25q128a11", "jedec,spi-nor"; |
| 61 | spi-max-frequency = <24000000>; |
| 62 | }; |
| 63 | }; |
| 64 | }; |
| 65 | }; |