Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Device Tree Include file for Marvell Armada 375 family SoC |
| 4 | * |
| 5 | * Copyright (C) 2014 Marvell |
| 6 | * |
| 7 | * Gregory CLEMENT <gregory.clement@free-electrons.com> |
| 8 | * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| 9 | */ |
| 10 | |
| 11 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 12 | #include <dt-bindings/interrupt-controller/irq.h> |
| 13 | #include <dt-bindings/phy/phy.h> |
| 14 | |
| 15 | #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) |
| 16 | |
| 17 | / { |
| 18 | #address-cells = <1>; |
| 19 | #size-cells = <1>; |
| 20 | |
| 21 | model = "Marvell Armada 375 family SoC"; |
| 22 | compatible = "marvell,armada375"; |
| 23 | |
| 24 | aliases { |
| 25 | gpio0 = &gpio0; |
| 26 | gpio1 = &gpio1; |
| 27 | gpio2 = &gpio2; |
| 28 | serial0 = &uart0; |
| 29 | serial1 = &uart1; |
| 30 | }; |
| 31 | |
| 32 | clocks { |
| 33 | /* 1 GHz fixed main PLL */ |
| 34 | mainpll: mainpll { |
| 35 | compatible = "fixed-clock"; |
| 36 | #clock-cells = <0>; |
| 37 | clock-frequency = <1000000000>; |
| 38 | }; |
| 39 | /* 25 MHz reference crystal */ |
| 40 | refclk: oscillator { |
| 41 | compatible = "fixed-clock"; |
| 42 | #clock-cells = <0>; |
| 43 | clock-frequency = <25000000>; |
| 44 | }; |
| 45 | }; |
| 46 | |
| 47 | cpus { |
| 48 | #address-cells = <1>; |
| 49 | #size-cells = <0>; |
| 50 | enable-method = "marvell,armada-375-smp"; |
| 51 | |
| 52 | cpu0: cpu@0 { |
| 53 | device_type = "cpu"; |
| 54 | compatible = "arm,cortex-a9"; |
| 55 | reg = <0>; |
| 56 | }; |
| 57 | cpu1: cpu@1 { |
| 58 | device_type = "cpu"; |
| 59 | compatible = "arm,cortex-a9"; |
| 60 | reg = <1>; |
| 61 | }; |
| 62 | }; |
| 63 | |
| 64 | pmu { |
| 65 | compatible = "arm,cortex-a9-pmu"; |
| 66 | interrupts-extended = <&mpic 3>; |
| 67 | }; |
| 68 | |
| 69 | soc { |
| 70 | compatible = "marvell,armada375-mbus", "simple-bus"; |
| 71 | #address-cells = <2>; |
| 72 | #size-cells = <1>; |
| 73 | controller = <&mbusc>; |
| 74 | interrupt-parent = <&gic>; |
| 75 | pcie-mem-aperture = <0xe0000000 0x8000000>; |
| 76 | pcie-io-aperture = <0xe8000000 0x100000>; |
| 77 | |
| 78 | bootrom { |
| 79 | compatible = "marvell,bootrom"; |
| 80 | reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>; |
| 81 | }; |
| 82 | |
| 83 | devbus_bootcs: devbus-bootcs { |
| 84 | compatible = "marvell,mvebu-devbus"; |
| 85 | reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; |
| 86 | ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; |
| 87 | #address-cells = <1>; |
| 88 | #size-cells = <1>; |
| 89 | clocks = <&coreclk 0>; |
| 90 | status = "disabled"; |
| 91 | }; |
| 92 | |
| 93 | devbus_cs0: devbus-cs0 { |
| 94 | compatible = "marvell,mvebu-devbus"; |
| 95 | reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; |
| 96 | ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; |
| 97 | #address-cells = <1>; |
| 98 | #size-cells = <1>; |
| 99 | clocks = <&coreclk 0>; |
| 100 | status = "disabled"; |
| 101 | }; |
| 102 | |
| 103 | devbus_cs1: devbus-cs1 { |
| 104 | compatible = "marvell,mvebu-devbus"; |
| 105 | reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; |
| 106 | ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; |
| 107 | #address-cells = <1>; |
| 108 | #size-cells = <1>; |
| 109 | clocks = <&coreclk 0>; |
| 110 | status = "disabled"; |
| 111 | }; |
| 112 | |
| 113 | devbus_cs2: devbus-cs2 { |
| 114 | compatible = "marvell,mvebu-devbus"; |
| 115 | reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; |
| 116 | ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; |
| 117 | #address-cells = <1>; |
| 118 | #size-cells = <1>; |
| 119 | clocks = <&coreclk 0>; |
| 120 | status = "disabled"; |
| 121 | }; |
| 122 | |
| 123 | devbus_cs3: devbus-cs3 { |
| 124 | compatible = "marvell,mvebu-devbus"; |
| 125 | reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; |
| 126 | ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; |
| 127 | #address-cells = <1>; |
| 128 | #size-cells = <1>; |
| 129 | clocks = <&coreclk 0>; |
| 130 | status = "disabled"; |
| 131 | }; |
| 132 | |
| 133 | internal-regs { |
| 134 | compatible = "simple-bus"; |
| 135 | #address-cells = <1>; |
| 136 | #size-cells = <1>; |
| 137 | ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; |
| 138 | |
| 139 | L2: cache-controller@8000 { |
| 140 | compatible = "arm,pl310-cache"; |
| 141 | reg = <0x8000 0x1000>; |
| 142 | cache-unified; |
| 143 | cache-level = <2>; |
| 144 | arm,double-linefill-incr = <0>; |
| 145 | arm,double-linefill-wrap = <0>; |
| 146 | arm,double-linefill = <0>; |
| 147 | prefetch-data = <1>; |
| 148 | }; |
| 149 | |
| 150 | scu: scu@c000 { |
| 151 | compatible = "arm,cortex-a9-scu"; |
| 152 | reg = <0xc000 0x58>; |
| 153 | }; |
| 154 | |
| 155 | timer0: timer@c600 { |
| 156 | compatible = "arm,cortex-a9-twd-timer"; |
| 157 | reg = <0xc600 0x20>; |
| 158 | interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; |
| 159 | clocks = <&coreclk 2>; |
| 160 | }; |
| 161 | |
| 162 | gic: interrupt-controller@d000 { |
| 163 | compatible = "arm,cortex-a9-gic"; |
| 164 | #interrupt-cells = <3>; |
| 165 | #size-cells = <0>; |
| 166 | interrupt-controller; |
| 167 | reg = <0xd000 0x1000>, |
| 168 | <0xc100 0x100>; |
| 169 | }; |
| 170 | |
| 171 | mdio: mdio@c0054 { |
| 172 | #address-cells = <1>; |
| 173 | #size-cells = <0>; |
| 174 | compatible = "marvell,orion-mdio"; |
| 175 | reg = <0xc0054 0x4>; |
| 176 | clocks = <&gateclk 19>; |
| 177 | }; |
| 178 | |
| 179 | /* Network controller */ |
| 180 | ethernet: ethernet@f0000 { |
| 181 | #address-cells = <1>; |
| 182 | #size-cells = <0>; |
| 183 | compatible = "marvell,armada-375-pp2"; |
| 184 | reg = <0xf0000 0xa000>, /* Packet Processor regs */ |
| 185 | <0xc0000 0x3060>, /* LMS regs */ |
| 186 | <0xc4000 0x100>, /* eth0 regs */ |
| 187 | <0xc5000 0x100>; /* eth1 regs */ |
| 188 | clocks = <&gateclk 3>, <&gateclk 19>; |
| 189 | clock-names = "pp_clk", "gop_clk"; |
| 190 | status = "disabled"; |
| 191 | |
| 192 | eth0: ethernet-port@0 { |
| 193 | interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 194 | reg = <0>; |
| 195 | port-id = <0>; /* For backward compatibility. */ |
| 196 | status = "disabled"; |
| 197 | }; |
| 198 | |
| 199 | eth1: ethernet-port@1 { |
| 200 | interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 201 | reg = <1>; |
| 202 | port-id = <1>; /* For backward compatibility. */ |
| 203 | status = "disabled"; |
| 204 | }; |
| 205 | }; |
| 206 | |
| 207 | rtc: rtc@10300 { |
| 208 | compatible = "marvell,orion-rtc"; |
| 209 | reg = <0x10300 0x20>; |
| 210 | interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| 211 | }; |
| 212 | |
| 213 | spi0: spi@10600 { |
| 214 | compatible = "marvell,armada-375-spi", |
| 215 | "marvell,orion-spi"; |
| 216 | reg = <0x10600 0x50>; |
| 217 | #address-cells = <1>; |
| 218 | #size-cells = <0>; |
| 219 | cell-index = <0>; |
| 220 | interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 221 | clocks = <&coreclk 0>; |
| 222 | status = "disabled"; |
| 223 | }; |
| 224 | |
| 225 | spi1: spi@10680 { |
| 226 | compatible = "marvell,armada-375-spi", |
| 227 | "marvell,orion-spi"; |
| 228 | reg = <0x10680 0x50>; |
| 229 | #address-cells = <1>; |
| 230 | #size-cells = <0>; |
| 231 | cell-index = <1>; |
| 232 | interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 233 | clocks = <&coreclk 0>; |
| 234 | status = "disabled"; |
| 235 | }; |
| 236 | |
| 237 | i2c0: i2c@11000 { |
| 238 | compatible = "marvell,mv64xxx-i2c"; |
| 239 | reg = <0x11000 0x20>; |
| 240 | #address-cells = <1>; |
| 241 | #size-cells = <0>; |
| 242 | interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 243 | clocks = <&coreclk 0>; |
| 244 | status = "disabled"; |
| 245 | }; |
| 246 | |
| 247 | i2c1: i2c@11100 { |
| 248 | compatible = "marvell,mv64xxx-i2c"; |
| 249 | reg = <0x11100 0x20>; |
| 250 | #address-cells = <1>; |
| 251 | #size-cells = <0>; |
| 252 | interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 253 | clocks = <&coreclk 0>; |
| 254 | status = "disabled"; |
| 255 | }; |
| 256 | |
| 257 | uart0: serial@12000 { |
| 258 | compatible = "snps,dw-apb-uart"; |
| 259 | reg = <0x12000 0x100>; |
| 260 | reg-shift = <2>; |
| 261 | interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 262 | reg-io-width = <1>; |
| 263 | clocks = <&coreclk 0>; |
| 264 | status = "disabled"; |
| 265 | }; |
| 266 | |
| 267 | uart1: serial@12100 { |
| 268 | compatible = "snps,dw-apb-uart"; |
| 269 | reg = <0x12100 0x100>; |
| 270 | reg-shift = <2>; |
| 271 | interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 272 | reg-io-width = <1>; |
| 273 | clocks = <&coreclk 0>; |
| 274 | status = "disabled"; |
| 275 | }; |
| 276 | |
| 277 | pinctrl: pinctrl@18000 { |
| 278 | compatible = "marvell,mv88f6720-pinctrl"; |
| 279 | reg = <0x18000 0x24>; |
| 280 | |
| 281 | i2c0_pins: i2c0-pins { |
| 282 | marvell,pins = "mpp14", "mpp15"; |
| 283 | marvell,function = "i2c0"; |
| 284 | }; |
| 285 | |
| 286 | i2c1_pins: i2c1-pins { |
| 287 | marvell,pins = "mpp61", "mpp62"; |
| 288 | marvell,function = "i2c1"; |
| 289 | }; |
| 290 | |
| 291 | nand_pins: nand-pins { |
| 292 | marvell,pins = "mpp0", "mpp1", "mpp2", |
| 293 | "mpp3", "mpp4", "mpp5", |
| 294 | "mpp6", "mpp7", "mpp8", |
| 295 | "mpp9", "mpp10", "mpp11", |
| 296 | "mpp12", "mpp13"; |
| 297 | marvell,function = "nand"; |
| 298 | }; |
| 299 | |
| 300 | sdio_pins: sdio-pins { |
| 301 | marvell,pins = "mpp24", "mpp25", "mpp26", |
| 302 | "mpp27", "mpp28", "mpp29"; |
| 303 | marvell,function = "sd"; |
| 304 | }; |
| 305 | |
| 306 | spi0_pins: spi0-pins { |
| 307 | marvell,pins = "mpp0", "mpp1", "mpp4", |
| 308 | "mpp5", "mpp8", "mpp9"; |
| 309 | marvell,function = "spi0"; |
| 310 | }; |
| 311 | }; |
| 312 | |
| 313 | gpio0: gpio@18100 { |
| 314 | compatible = "marvell,orion-gpio"; |
| 315 | reg = <0x18100 0x40>; |
| 316 | ngpios = <32>; |
| 317 | gpio-controller; |
| 318 | #gpio-cells = <2>; |
| 319 | interrupt-controller; |
| 320 | #interrupt-cells = <2>; |
| 321 | interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| 322 | <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 323 | <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| 324 | <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| 325 | }; |
| 326 | |
| 327 | gpio1: gpio@18140 { |
| 328 | compatible = "marvell,orion-gpio"; |
| 329 | reg = <0x18140 0x40>; |
| 330 | ngpios = <32>; |
| 331 | gpio-controller; |
| 332 | #gpio-cells = <2>; |
| 333 | interrupt-controller; |
| 334 | #interrupt-cells = <2>; |
| 335 | interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| 336 | <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| 337 | <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| 338 | <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 339 | }; |
| 340 | |
| 341 | gpio2: gpio@18180 { |
| 342 | compatible = "marvell,orion-gpio"; |
| 343 | reg = <0x18180 0x40>; |
| 344 | ngpios = <3>; |
| 345 | gpio-controller; |
| 346 | #gpio-cells = <2>; |
| 347 | interrupt-controller; |
| 348 | #interrupt-cells = <2>; |
| 349 | interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| 350 | }; |
| 351 | |
| 352 | systemc: system-controller@18200 { |
| 353 | compatible = "marvell,armada-375-system-controller"; |
| 354 | reg = <0x18200 0x100>; |
| 355 | }; |
| 356 | |
| 357 | gateclk: clock-gating-control@18220 { |
| 358 | compatible = "marvell,armada-375-gating-clock"; |
| 359 | reg = <0x18220 0x4>; |
| 360 | clocks = <&coreclk 0>; |
| 361 | #clock-cells = <1>; |
| 362 | }; |
| 363 | |
| 364 | usbcluster: usb-cluster@18400 { |
| 365 | compatible = "marvell,armada-375-usb-cluster"; |
| 366 | reg = <0x18400 0x4>; |
| 367 | #phy-cells = <1>; |
| 368 | }; |
| 369 | |
| 370 | mbusc: mbus-controller@20000 { |
| 371 | compatible = "marvell,mbus-controller"; |
| 372 | reg = <0x20000 0x100>, <0x20180 0x20>; |
| 373 | }; |
| 374 | |
| 375 | mpic: interrupt-controller@20a00 { |
| 376 | compatible = "marvell,mpic"; |
| 377 | reg = <0x20a00 0x2d0>, <0x21070 0x58>; |
| 378 | #interrupt-cells = <1>; |
| 379 | #size-cells = <1>; |
| 380 | interrupt-controller; |
| 381 | msi-controller; |
| 382 | interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 383 | }; |
| 384 | |
| 385 | timer1: timer@20300 { |
| 386 | compatible = "marvell,armada-375-timer", "marvell,armada-370-timer"; |
| 387 | reg = <0x20300 0x30>, <0x21040 0x30>; |
| 388 | interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 389 | <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 390 | <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| 391 | <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| 392 | <&mpic 5>, |
| 393 | <&mpic 6>; |
| 394 | clocks = <&coreclk 0>, <&refclk>; |
| 395 | clock-names = "nbclk", "fixed"; |
| 396 | }; |
| 397 | |
| 398 | watchdog: watchdog@20300 { |
| 399 | compatible = "marvell,armada-375-wdt"; |
| 400 | reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>; |
| 401 | clocks = <&coreclk 0>, <&refclk>; |
| 402 | clock-names = "nbclk", "fixed"; |
| 403 | }; |
| 404 | |
| 405 | cpurst: cpurst@20800 { |
| 406 | compatible = "marvell,armada-370-cpu-reset"; |
| 407 | reg = <0x20800 0x10>; |
| 408 | }; |
| 409 | |
| 410 | coherencyfab: coherency-fabric@21010 { |
| 411 | compatible = "marvell,armada-375-coherency-fabric"; |
| 412 | reg = <0x21010 0x1c>; |
| 413 | }; |
| 414 | |
| 415 | usb0: usb@50000 { |
| 416 | compatible = "marvell,orion-ehci"; |
| 417 | reg = <0x50000 0x500>; |
| 418 | interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| 419 | clocks = <&gateclk 18>; |
| 420 | phys = <&usbcluster PHY_TYPE_USB2>; |
| 421 | phy-names = "usb"; |
| 422 | status = "disabled"; |
| 423 | }; |
| 424 | |
| 425 | usb1: usb@54000 { |
| 426 | compatible = "marvell,orion-ehci"; |
| 427 | reg = <0x54000 0x500>; |
| 428 | interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| 429 | clocks = <&gateclk 26>; |
| 430 | status = "disabled"; |
| 431 | }; |
| 432 | |
| 433 | usb2: usb@58000 { |
| 434 | compatible = "marvell,armada-375-xhci"; |
| 435 | reg = <0x58000 0x20000>,<0x5b880 0x80>; |
| 436 | interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 437 | clocks = <&gateclk 16>; |
| 438 | phys = <&usbcluster PHY_TYPE_USB3>; |
| 439 | phy-names = "usb"; |
| 440 | status = "disabled"; |
| 441 | }; |
| 442 | |
| 443 | xor0: xor@60800 { |
| 444 | compatible = "marvell,orion-xor"; |
| 445 | reg = <0x60800 0x100 |
| 446 | 0x60A00 0x100>; |
| 447 | clocks = <&gateclk 22>; |
| 448 | status = "okay"; |
| 449 | |
| 450 | xor00 { |
| 451 | interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| 452 | dmacap,memcpy; |
| 453 | dmacap,xor; |
| 454 | }; |
| 455 | xor01 { |
| 456 | interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| 457 | dmacap,memcpy; |
| 458 | dmacap,xor; |
| 459 | dmacap,memset; |
| 460 | }; |
| 461 | }; |
| 462 | |
| 463 | xor1: xor@60900 { |
| 464 | compatible = "marvell,orion-xor"; |
| 465 | reg = <0x60900 0x100 |
| 466 | 0x60b00 0x100>; |
| 467 | clocks = <&gateclk 23>; |
| 468 | status = "okay"; |
| 469 | |
| 470 | xor10 { |
| 471 | interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 472 | dmacap,memcpy; |
| 473 | dmacap,xor; |
| 474 | }; |
| 475 | xor11 { |
| 476 | interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| 477 | dmacap,memcpy; |
| 478 | dmacap,xor; |
| 479 | dmacap,memset; |
| 480 | }; |
| 481 | }; |
| 482 | |
| 483 | cesa: crypto@90000 { |
| 484 | compatible = "marvell,armada-375-crypto"; |
| 485 | reg = <0x90000 0x10000>; |
| 486 | reg-names = "regs"; |
| 487 | interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| 488 | <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 489 | clocks = <&gateclk 30>, <&gateclk 31>, |
| 490 | <&gateclk 28>, <&gateclk 29>; |
| 491 | clock-names = "cesa0", "cesa1", |
| 492 | "cesaz0", "cesaz1"; |
| 493 | marvell,crypto-srams = <&crypto_sram0>, |
| 494 | <&crypto_sram1>; |
| 495 | marvell,crypto-sram-size = <0x800>; |
| 496 | }; |
| 497 | |
| 498 | sata: sata@a0000 { |
| 499 | compatible = "marvell,armada-370-sata"; |
| 500 | reg = <0xa0000 0x5000>; |
| 501 | interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 502 | clocks = <&gateclk 14>, <&gateclk 20>; |
| 503 | clock-names = "0", "1"; |
| 504 | status = "disabled"; |
| 505 | }; |
| 506 | |
| 507 | nand_controller: nand-controller@d0000 { |
| 508 | compatible = "marvell,armada370-nand-controller"; |
| 509 | reg = <0xd0000 0x54>; |
| 510 | #address-cells = <1>; |
| 511 | #size-cells = <0>; |
| 512 | interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 513 | clocks = <&gateclk 11>; |
| 514 | status = "disabled"; |
| 515 | }; |
| 516 | |
| 517 | sdio: mvsdio@d4000 { |
| 518 | compatible = "marvell,orion-sdio"; |
| 519 | reg = <0xd4000 0x200>; |
| 520 | interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 521 | clocks = <&gateclk 17>; |
| 522 | bus-width = <4>; |
| 523 | cap-sdio-irq; |
| 524 | cap-sd-highspeed; |
| 525 | cap-mmc-highspeed; |
| 526 | status = "disabled"; |
| 527 | }; |
| 528 | |
| 529 | thermal: thermal@e8078 { |
| 530 | compatible = "marvell,armada375-thermal"; |
| 531 | reg = <0xe8078 0x4>, <0xe807c 0x8>; |
| 532 | status = "okay"; |
| 533 | }; |
| 534 | |
| 535 | coreclk: mvebu-sar@e8204 { |
| 536 | compatible = "marvell,armada-375-core-clock"; |
| 537 | reg = <0xe8204 0x04>; |
| 538 | #clock-cells = <1>; |
| 539 | }; |
| 540 | |
| 541 | coredivclk: corediv-clock@e8250 { |
| 542 | compatible = "marvell,armada-375-corediv-clock"; |
| 543 | reg = <0xe8250 0xc>; |
| 544 | #clock-cells = <1>; |
| 545 | clocks = <&mainpll>; |
| 546 | clock-output-names = "nand"; |
| 547 | }; |
| 548 | }; |
| 549 | |
| 550 | pciec: pcie@82000000 { |
| 551 | compatible = "marvell,armada-370-pcie"; |
| 552 | status = "disabled"; |
| 553 | device_type = "pci"; |
| 554 | |
| 555 | #address-cells = <3>; |
| 556 | #size-cells = <2>; |
| 557 | |
| 558 | msi-parent = <&mpic>; |
| 559 | bus-range = <0x00 0xff>; |
| 560 | |
| 561 | ranges = |
| 562 | <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 |
| 563 | 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 |
| 564 | 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */ |
| 565 | 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO */ |
| 566 | 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */ |
| 567 | 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>; |
| 568 | |
| 569 | pcie0: pcie@1,0 { |
| 570 | device_type = "pci"; |
| 571 | assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; |
| 572 | reg = <0x0800 0 0 0 0>; |
| 573 | #address-cells = <3>; |
| 574 | #size-cells = <2>; |
| 575 | interrupt-names = "intx"; |
| 576 | interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 577 | #interrupt-cells = <1>; |
| 578 | ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
| 579 | 0x81000000 0 0 0x81000000 0x1 0 1 0>; |
| 580 | bus-range = <0x00 0xff>; |
| 581 | interrupt-map-mask = <0 0 0 7>; |
| 582 | interrupt-map = <0 0 0 1 &pcie0_intc 0>, |
| 583 | <0 0 0 2 &pcie0_intc 1>, |
| 584 | <0 0 0 3 &pcie0_intc 2>, |
| 585 | <0 0 0 4 &pcie0_intc 3>; |
| 586 | marvell,pcie-port = <0>; |
| 587 | marvell,pcie-lane = <0>; |
| 588 | clocks = <&gateclk 5>; |
| 589 | status = "disabled"; |
| 590 | |
| 591 | pcie0_intc: interrupt-controller { |
| 592 | interrupt-controller; |
| 593 | #interrupt-cells = <1>; |
| 594 | }; |
| 595 | }; |
| 596 | |
| 597 | pcie1: pcie@2,0 { |
| 598 | device_type = "pci"; |
| 599 | assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; |
| 600 | reg = <0x1000 0 0 0 0>; |
| 601 | #address-cells = <3>; |
| 602 | #size-cells = <2>; |
| 603 | interrupt-names = "intx"; |
| 604 | interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 605 | #interrupt-cells = <1>; |
| 606 | ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
| 607 | 0x81000000 0 0 0x81000000 0x2 0 1 0>; |
| 608 | bus-range = <0x00 0xff>; |
| 609 | interrupt-map-mask = <0 0 0 7>; |
| 610 | interrupt-map = <0 0 0 1 &pcie1_intc 0>, |
| 611 | <0 0 0 2 &pcie1_intc 1>, |
| 612 | <0 0 0 3 &pcie1_intc 2>, |
| 613 | <0 0 0 4 &pcie1_intc 3>; |
| 614 | marvell,pcie-port = <0>; |
| 615 | marvell,pcie-lane = <1>; |
| 616 | clocks = <&gateclk 6>; |
| 617 | status = "disabled"; |
| 618 | |
| 619 | pcie1_intc: interrupt-controller { |
| 620 | interrupt-controller; |
| 621 | #interrupt-cells = <1>; |
| 622 | }; |
| 623 | }; |
| 624 | |
| 625 | }; |
| 626 | |
| 627 | crypto_sram0: sa-sram0 { |
| 628 | compatible = "mmio-sram"; |
| 629 | reg = <MBUS_ID(0x09, 0x09) 0 0x800>; |
| 630 | clocks = <&gateclk 30>; |
| 631 | #address-cells = <1>; |
| 632 | #size-cells = <1>; |
| 633 | ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>; |
| 634 | }; |
| 635 | |
| 636 | crypto_sram1: sa-sram1 { |
| 637 | compatible = "mmio-sram"; |
| 638 | reg = <MBUS_ID(0x09, 0x05) 0 0x800>; |
| 639 | clocks = <&gateclk 31>; |
| 640 | #address-cells = <1>; |
| 641 | #size-cells = <1>; |
| 642 | ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; |
| 643 | }; |
| 644 | }; |
| 645 | }; |