blob: 874c0dc740cc65fcd810317980e3cc3c3f2a8223 [file] [log] [blame]
Dave Liu6f1a8a22008-03-26 22:55:32 +08001/*
2 * Copyright (C) 2007-2008 Freescale Semiconductor, Inc.
3 * Dave Liu <daveliu@freescale.com>
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18 * MA 02111-1307 USA
19 */
20
21#ifndef __FSL_SATA_H__
22#define __FSL_SATA_H__
23
24#define SATA_HC_MAX_NUM 4 /* Max host controller numbers */
25#define SATA_HC_MAX_CMD 16 /* Max command queue depth per host controller */
26#define SATA_HC_MAX_PORT 16 /* Max port number per host controller */
27
28/*
29* SATA Host Controller Registers
30*/
31typedef struct fsl_sata_reg {
32 /* SATA command registers */
33 u32 cqr; /* Command queue register */
34 u8 res1[0x4];
35 u32 car; /* Command active register */
36 u8 res2[0x4];
37 u32 ccr; /* Command completed register */
38 u8 res3[0x4];
39 u32 cer; /* Command error register */
40 u8 res4[0x4];
41 u32 der; /* Device error register */
42 u32 chba; /* Command header base address */
43 u32 hstatus; /* Host status register */
44 u32 hcontrol; /* Host control register */
45 u32 cqpmp; /* Port number queue register */
46 u32 sig; /* Signature register */
47 u32 icc; /* Interrupt coalescing control register */
48 u8 res5[0xc4];
49
50 /* SATA supperset registers */
51 u32 sstatus; /* SATA interface status register */
52 u32 serror; /* SATA interface error register */
53 u32 scontrol; /* SATA interface control register */
54 u32 snotification; /* SATA interface notification register */
55 u8 res6[0x30];
56
57 /* SATA control status registers */
58 u32 transcfg; /* Transport layer configuration */
59 u32 transstatus; /* Transport layer status */
60 u32 linkcfg; /* Link layer configuration */
61 u32 linkcfg1; /* Link layer configuration1 */
62 u32 linkcfg2; /* Link layer configuration2 */
63 u32 linkstatus; /* Link layer status */
64 u32 linkstatus1; /* Link layer status1 */
65 u32 phyctrlcfg; /* PHY control configuration */
66 u8 res7[0x2b0];
67
68 /* SATA system control registers */
69 u32 syspr; /* System priority register - big endian */
70 u8 res8[0xbec];
71} __attribute__ ((packed)) fsl_sata_reg_t;
72
73/* HStatus register
74*/
75#define HSTATUS_ONOFF 0x80000000 /* Online/offline status */
76#define HSTATUS_FORCE_OFFLINE 0x40000000 /* In process going offline */
77#define HSTATUS_BIST_ERR 0x20000000
78
79/* Fatal error */
80#define HSTATUS_MASTER_ERR 0x00004000
81#define HSTATUS_DATA_UNDERRUN 0x00002000
82#define HSTATUS_DATA_OVERRUN 0x00001000
83#define HSTATUS_CRC_ERR_TX 0x00000800
84#define HSTATUS_CRC_ERR_RX 0x00000400
85#define HSTATUS_FIFO_OVERFLOW_TX 0x00000200
86#define HSTATUS_FIFO_OVERFLOW_RX 0x00000100
87#define HSTATUS_FATAL_ERR_ALL (HSTATUS_MASTER_ERR | \
88 HSTATUS_DATA_UNDERRUN | \
89 HSTATUS_DATA_OVERRUN | \
90 HSTATUS_CRC_ERR_TX | \
91 HSTATUS_CRC_ERR_RX | \
92 HSTATUS_FIFO_OVERFLOW_TX | \
93 HSTATUS_FIFO_OVERFLOW_RX)
94/* Interrupt status */
95#define HSTATUS_FATAL_ERR 0x00000020
96#define HSTATUS_PHY_RDY 0x00000010
97#define HSTATUS_SIGNATURE 0x00000008
98#define HSTATUS_SNOTIFY 0x00000004
99#define HSTATUS_DEVICE_ERR 0x00000002
100#define HSTATUS_CMD_COMPLETE 0x00000001
101
102/* HControl register
103*/
104#define HCONTROL_ONOFF 0x80000000 /* Online or offline request */
105#define HCONTROL_FORCE_OFFLINE 0x40000000 /* Force offline request */
106#define HCONTROL_HDR_SNOOP 0x00000400 /* Command header snoop */
107#define HCONTROL_PMP_ATTACHED 0x00000200 /* Port multiplier attached */
108
109/* Interrupt enable */
110#define HCONTROL_FATAL_ERR 0x00000020
111#define HCONTROL_PHY_RDY 0x00000010
112#define HCONTROL_SIGNATURE 0x00000008
113#define HCONTROL_SNOTIFY 0x00000004
114#define HCONTROL_DEVICE_ERR 0x00000002
115#define HCONTROL_CMD_COMPLETE 0x00000001
116
117#define HCONTROL_INT_EN_ALL (HCONTROL_FATAL_ERR | \
118 HCONTROL_PHY_RDY | \
119 HCONTROL_SIGNATURE | \
120 HCONTROL_SNOTIFY | \
121 HCONTROL_DEVICE_ERR | \
122 HCONTROL_CMD_COMPLETE)
123
124/* SStatus register
125*/
126#define SSTATUS_IPM_MASK 0x00000780
127#define SSTATUS_IPM_NOPRESENT 0x00000000
128#define SSTATUS_IPM_ACTIVE 0x00000080
129#define SSTATUS_IPM_PATIAL 0x00000100
130#define SSTATUS_IPM_SLUMBER 0x00000300
131
132#define SSTATUS_SPD_MASK 0x000000f0
133#define SSTATUS_SPD_GEN1 0x00000010
134#define SSTATUS_SPD_GEN2 0x00000020
135
136#define SSTATUS_DET_MASK 0x0000000f
137#define SSTATUS_DET_NODEVICE 0x00000000
138#define SSTATUS_DET_DISCONNECT 0x00000001
139#define SSTATUS_DET_CONNECT 0x00000003
140#define SSTATUS_DET_PHY_OFFLINE 0x00000004
141
142/* SControl register
143*/
144#define SCONTROL_SPM_MASK 0x0000f000
145#define SCONTROL_SPM_GO_PARTIAL 0x00001000
146#define SCONTROL_SPM_GO_SLUMBER 0x00002000
147#define SCONTROL_SPM_GO_ACTIVE 0x00004000
148
149#define SCONTROL_IPM_MASK 0x00000f00
150#define SCONTROL_IPM_NO_RESTRICT 0x00000000
151#define SCONTROL_IPM_PARTIAL 0x00000100
152#define SCONTROL_IPM_SLUMBER 0x00000200
153#define SCONTROL_IPM_PART_SLUM 0x00000300
154
155#define SCONTROL_SPD_MASK 0x000000f0
156#define SCONTROL_SPD_NO_RESTRICT 0x00000000
157#define SCONTROL_SPD_GEN1 0x00000010
158#define SCONTROL_SPD_GEN2 0x00000020
159
160#define SCONTROL_DET_MASK 0x0000000f
161#define SCONTROL_DET_HRESET 0x00000001
162#define SCONTROL_DET_DISABLE 0x00000004
163
164/* TransCfg register
165*/
166#define TRANSCFG_DFIS_SIZE_SHIFT 16
167#define TRANSCFG_RX_WATER_MARK_MASK 0x0000001f
168
169/* PhyCtrlCfg register
170*/
171#define PHYCTRLCFG_FPRFTI_MASK 0x00000018
172#define PHYCTRLCFG_LOOPBACK_MASK 0x0000000e
173
174/*
175* Command Header Entry
176*/
177typedef struct cmd_hdr_entry {
178 u32 cda; /* Command Descriptor Address, 4 bytes aligned */
179 u32 prde_fis_len; /* Number of PRD entries and FIS length */
180 u32 ttl; /* Total transfer length */
181 u32 attribute; /* the attribute of command */
182} __attribute__ ((packed)) cmd_hdr_entry_t;
183
184#define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry)
185
186/* cda
187*/
188#define CMD_HDR_CDA_ALIGN 4
189
190/* prde_fis_len
191*/
192#define CMD_HDR_PRD_ENTRY_SHIFT 16
193#define CMD_HDR_PRD_ENTRY_MASK 0x003f0000
194#define CMD_HDR_FIS_LEN_SHIFT 2
195
196/* attribute
197*/
198#define CMD_HDR_ATTR_RES 0x00000800 /* Reserved bit, should be 1 */
199#define CMD_HDR_ATTR_VBIST 0x00000400 /* Vendor BIST */
200#define CMD_HDR_ATTR_SNOOP 0x00000200 /* Snoop enable for all descriptor */
201#define CMD_HDR_ATTR_FPDMA 0x00000100 /* FPDMA queued command */
202#define CMD_HDR_ATTR_RESET 0x00000080 /* Reset - a SRST or device reset */
203#define CMD_HDR_ATTR_BIST 0x00000040 /* BIST - require the host to enter BIST mode */
204#define CMD_HDR_ATTR_ATAPI 0x00000020 /* ATAPI command */
205#define CMD_HDR_ATTR_TAG 0x0000001f /* TAG mask */
206
207/* command type
208*/
209enum cmd_type {
210 CMD_VENDOR_BIST,
211 CMD_BIST,
212 CMD_RESET, /* SRST or device reset */
213 CMD_ATAPI,
214 CMD_NCQ,
215 CMD_ATA, /* None of all above */
216};
217
218/*
219* Command Header Table
220*/
221typedef struct cmd_hdr_tbl {
222 cmd_hdr_entry_t cmd_slot[SATA_HC_MAX_CMD];
223} __attribute__ ((packed)) cmd_hdr_tbl_t;
224
225#define SATA_HC_CMD_HDR_TBL_SIZE sizeof(struct cmd_hdr_tbl)
226#define SATA_HC_CMD_HDR_TBL_ALIGN 4
227
228/*
229* PRD entry - Physical Region Descriptor entry
230*/
231typedef struct prd_entry {
232 u32 dba; /* Data base address, 4 bytes aligned */
233 u32 res1;
234 u32 res2;
235 u32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */
236} __attribute__ ((packed)) prd_entry_t;
237
238#define SATA_HC_CMD_DESC_PRD_SIZE sizeof(struct prd_entry)
239
240/* dba
241*/
242#define PRD_ENTRY_DBA_ALIGN 4
243
244/* ext_c_ddc
245*/
246#define PRD_ENTRY_EXT 0x80000000 /* extension flag or called indirect descriptor flag */
247#define PRD_ENTRY_DATA_SNOOP 0x00400000 /* Snoop enable for all data associated with the PRD entry */
248#define PRD_ENTRY_LEN_MASK 0x003fffff /* Data word count */
249
250#define PRD_ENTRY_MAX_XFER_SZ (PRD_ENTRY_LEN_MASK + 1)
251
252/*
253 * This SATA host controller supports a max of 16 direct PRD entries, but if use
254 * chained indirect PRD entries, then the contollers supports upto a max of 63
255 * entries including direct and indirect PRD entries.
256 * The PRDT is an array of 63 PRD entries contigiously, but the PRD entries#15
257 * will be setup as an indirect descriptor, pointing to it's next (contigious)
258 * PRD entries#16.
259 */
260#define SATA_HC_MAX_PRD 63 /* Max PRD entry numbers per command */
261#define SATA_HC_MAX_PRD_DIRECT 16 /* Direct PRDT entries */
262#define SATA_HC_MAX_PRD_USABLE (SATA_HC_MAX_PRD - 1)
263#define SATA_HC_MAX_XFER_LEN 0x4000000
264
265/*
266* PRDT - Physical Region Descriptor Table
267*/
268typedef struct prdt {
269 prd_entry_t prdt[SATA_HC_MAX_PRD];
270} __attribute__ ((packed)) prdt_t;
271
272/*
273* Command Descriptor
274*/
275#define SATA_HC_CMD_DESC_CFIS_SIZE 32 /* bytes */
276#define SATA_HC_CMD_DESC_SFIS_SIZE 32 /* bytes */
277#define SATA_HC_CMD_DESC_ACMD_SIZE 16 /* bytes */
278#define SATA_HC_CMD_DESC_RES 16 /* bytes */
279
280typedef struct cmd_desc {
281 u8 cfis[SATA_HC_CMD_DESC_CFIS_SIZE];
282 u8 sfis[SATA_HC_CMD_DESC_SFIS_SIZE];
283 u8 acmd[SATA_HC_CMD_DESC_ACMD_SIZE];
284 u8 res[SATA_HC_CMD_DESC_RES];
285 prd_entry_t prdt[SATA_HC_MAX_PRD];
286} __attribute__ ((packed)) cmd_desc_t;
287
288#define SATA_HC_CMD_DESC_SIZE sizeof(struct cmd_desc)
289#define SATA_HC_CMD_DESC_ALIGN 4
290
291/*
292* CFIS - Command FIS, which is H2D register FIS, the struct defination
293* of Non-Queued command is different than NCQ command. see them is sata2.h
294*/
295typedef struct cfis {
296 u8 fis_type;
297 u8 pm_port_c;
298 u8 command;
299 u8 features;
300 u8 lba_low;
301 u8 lba_mid;
302 u8 lba_high;
303 u8 device;
304 u8 lba_low_exp;
305 u8 lba_mid_exp;
306 u8 lba_high_exp;
307 u8 features_exp;
308 u8 sector_count;
309 u8 sector_count_exp;
310 u8 res1;
311 u8 control;
312 u8 res2[4];
313} __attribute__ ((packed)) cfis_t;
314
315/*
316* SFIS - Status FIS, which is D2H register FIS.
317*/
318typedef struct sfis {
319 u8 fis_type;
320 u8 pm_port_i;
321 u8 status;
322 u8 error;
323 u8 lba_low;
324 u8 lba_mid;
325 u8 lba_high;
326 u8 device;
327 u8 lba_low_exp;
328 u8 lba_mid_exp;
329 u8 lba_high_exp;
330 u8 res1;
331 u8 sector_count;
332 u8 sector_count_exp;
333 u8 res2[2];
334 u8 res3[4];
335} __attribute__ ((packed)) sfis_t;
336
337/*
338 * SATA device driver info
339 */
340typedef struct fsl_sata_info {
341 u32 sata_reg_base;
342 u32 flags;
343} fsl_sata_info_t;
344
345#define FLAGS_DMA 0x00000000
346#define FLAGS_FPDMA 0x00000001
347
348/*
349 * SATA device driver struct
350 */
351typedef struct fsl_sata {
352 char name[12];
353 fsl_sata_reg_t *reg_base; /* the base address of controller register */
354 void *cmd_hdr_tbl_offset; /* alloc address of command header table */
355 cmd_hdr_tbl_t *cmd_hdr; /* aligned address of command header table */
356 void *cmd_desc_offset; /* alloc address of command descriptor */
357 cmd_desc_t *cmd_desc; /* aligned address of command descriptor */
358 int link; /* PHY link status */
359 /* device attribute */
360 int ata_device_type; /* device type */
361 int lba48;
362 int queue_depth; /* Max NCQ queue depth */
363 u16 pio;
364 u16 mwdma;
365 u16 udma;
366 int wcache;
367 int flush;
368 int flush_ext;
369} fsl_sata_t;
370
371#define READ_CMD 0
372#define WRITE_CMD 1
373
374#endif /* __FSL_SATA_H__ */