blob: ae9f0d0d626a2920595d3225bc7e16e4a96f917a [file] [log] [blame]
Bin Mengf17cea62015-04-24 18:10:04 +08001/*
2 * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#ifndef _X86_TABLES_H_
8#define _X86_TABLES_H_
9
10/*
11 * All x86 tables happen to like the address range from 0xf0000 to 0x100000.
12 * We use 0xf0000 as the starting address to store those tables, including
13 * PIRQ routing table, Multi-Processor table and ACPI table.
14 */
15#define ROM_TABLE_ADDR 0xf0000
16
Bin Meng900e49a2016-02-27 22:57:59 -080017#define ROM_TABLE_ALIGN 1024
18
Bin Meng96030fa2016-02-28 23:54:50 -080019/* SeaBIOS expects coreboot tables at address range 0x0000-0x1000 */
20#define CB_TABLE_ADDR 0x800
21
Bin Mengf17cea62015-04-24 18:10:04 +080022/**
23 * table_compute_checksum() - Compute a table checksum
24 *
25 * This computes an 8-bit checksum for the configuration table.
26 * All bytes in the configuration table, including checksum itself and
27 * reserved bytes must add up to zero.
28 *
29 * @v: configuration table base address
30 * @len: configuration table size
31 * @return: the 8-bit checksum
32 */
33u8 table_compute_checksum(void *v, int len);
34
35/**
Bin Mengf91cf6b2015-06-23 12:18:51 +080036 * table_fill_string() - Fill a string with pad in the configuration table
37 *
38 * This fills a string in the configuration table. It copies number of bytes
39 * from the source string, and if source string length is shorter than the
40 * required size to copy, pad the table string with the given pad character.
41 *
42 * @dest: where to fill a string
43 * @src: where to copy from
44 * @n: number of bytes to copy
45 * @pad: character to pad the remaining bytes
46 */
47void table_fill_string(char *dest, const char *src, size_t n, char pad);
48
49/**
Bin Mengf17cea62015-04-24 18:10:04 +080050 * write_tables() - Write x86 configuration tables
51 *
52 * This writes x86 configuration tables, including PIRQ routing table,
53 * Multi-Processor table and ACPI table. Whether a specific type of
54 * configuration table is written is controlled by a Kconfig option.
55 */
56void write_tables(void);
57
58/**
59 * write_pirq_routing_table() - Write PIRQ routing table
60 *
61 * This writes PIRQ routing table at a given address.
62 *
63 * @start: start address to write PIRQ routing table
64 * @return: end address of PIRQ routing table
65 */
66u32 write_pirq_routing_table(u32 start);
67
68#endif /* _X86_TABLES_H_ */