Svyatoslav Ryhel | fcbbd56 | 2023-04-25 10:51:45 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Renesas R69328 panel driver |
| 4 | * |
| 5 | * Copyright (c) 2022 Svyatoslav Ryhel <clamor95@gmail.com> |
| 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <backlight.h> |
| 10 | #include <dm.h> |
| 11 | #include <panel.h> |
| 12 | #include <log.h> |
| 13 | #include <misc.h> |
| 14 | #include <mipi_display.h> |
| 15 | #include <mipi_dsi.h> |
| 16 | #include <asm/gpio.h> |
| 17 | #include <linux/delay.h> |
| 18 | #include <linux/err.h> |
| 19 | #include <power/regulator.h> |
| 20 | |
| 21 | /* |
| 22 | * The datasheet is not publicly available, all values are |
| 23 | * taken from the downstream. If you have access to datasheets, |
| 24 | * corrections are welcome. |
| 25 | */ |
| 26 | |
| 27 | #define R69328_MACP 0xB0 /* Manufacturer Command Access Protect */ |
| 28 | |
| 29 | #define R69328_GAMMA_SET_A 0xC8 /* Gamma Setting A */ |
| 30 | #define R69328_GAMMA_SET_B 0xC9 /* Gamma Setting B */ |
| 31 | #define R69328_GAMMA_SET_C 0xCA /* Gamma Setting C */ |
| 32 | |
| 33 | #define R69328_POWER_SET 0xD1 |
| 34 | |
| 35 | struct renesas_r69328_priv { |
| 36 | struct udevice *backlight; |
| 37 | |
| 38 | struct gpio_desc enable_gpio; |
| 39 | struct gpio_desc reset_gpio; |
| 40 | }; |
| 41 | |
| 42 | static const u8 address_mode[] = { |
| 43 | MIPI_DCS_SET_ADDRESS_MODE |
| 44 | }; |
| 45 | |
| 46 | #define dsi_generic_write_seq(dsi, cmd, seq...) do { \ |
| 47 | static const u8 b[] = { cmd, seq }; \ |
| 48 | int ret; \ |
| 49 | ret = mipi_dsi_dcs_write_buffer(dsi, b, ARRAY_SIZE(b)); \ |
| 50 | if (ret < 0) \ |
| 51 | return ret; \ |
| 52 | } while (0) |
| 53 | |
| 54 | static struct display_timing default_timing = { |
| 55 | .pixelclock.typ = 68000000, |
| 56 | .hactive.typ = 720, |
| 57 | .hfront_porch.typ = 92, |
| 58 | .hback_porch.typ = 62, |
| 59 | .hsync_len.typ = 4, |
| 60 | .vactive.typ = 1280, |
| 61 | .vfront_porch.typ = 6, |
| 62 | .vback_porch.typ = 3, |
| 63 | .vsync_len.typ = 1, |
| 64 | }; |
| 65 | |
| 66 | static int renesas_r69328_enable_backlight(struct udevice *dev) |
| 67 | { |
| 68 | struct renesas_r69328_priv *priv = dev_get_priv(dev); |
| 69 | int ret; |
| 70 | |
| 71 | ret = dm_gpio_set_value(&priv->enable_gpio, 1); |
| 72 | if (ret) { |
| 73 | log_err("error changing enable-gpios (%d)\n", ret); |
| 74 | return ret; |
| 75 | } |
| 76 | mdelay(5); |
| 77 | |
| 78 | ret = dm_gpio_set_value(&priv->reset_gpio, 0); |
| 79 | if (ret) { |
| 80 | log_err("error changing reset-gpios (%d)\n", ret); |
| 81 | return ret; |
| 82 | } |
| 83 | mdelay(5); |
| 84 | |
| 85 | ret = dm_gpio_set_value(&priv->reset_gpio, 1); |
| 86 | if (ret) { |
| 87 | log_err("error changing reset-gpios (%d)\n", ret); |
| 88 | return ret; |
| 89 | } |
| 90 | |
| 91 | mdelay(5); |
| 92 | |
| 93 | return 0; |
| 94 | } |
| 95 | |
| 96 | static int renesas_r69328_set_backlight(struct udevice *dev, int percent) |
| 97 | { |
| 98 | struct renesas_r69328_priv *priv = dev_get_priv(dev); |
| 99 | struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); |
| 100 | struct mipi_dsi_device *dsi = plat->device; |
| 101 | int ret; |
| 102 | |
| 103 | mipi_dsi_dcs_write_buffer(dsi, address_mode, |
| 104 | sizeof(address_mode)); |
| 105 | |
| 106 | ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT << 4); |
| 107 | if (ret < 0) { |
| 108 | log_err("failed to set pixel format: %d\n", ret); |
| 109 | return ret; |
| 110 | } |
| 111 | |
| 112 | ret = mipi_dsi_dcs_exit_sleep_mode(dsi); |
| 113 | if (ret < 0) { |
| 114 | log_err("failed to exit sleep mode: %d\n", ret); |
| 115 | return ret; |
| 116 | } |
| 117 | |
| 118 | mdelay(100); |
| 119 | |
| 120 | /* MACP Off */ |
| 121 | dsi_generic_write_seq(dsi, R69328_MACP, 0x04); |
| 122 | |
| 123 | dsi_generic_write_seq(dsi, R69328_POWER_SET, 0x14, |
| 124 | 0x1d, 0x21, 0x67, 0x11, 0x9a); |
| 125 | |
| 126 | dsi_generic_write_seq(dsi, R69328_GAMMA_SET_A, 0x00, |
| 127 | 0x1a, 0x20, 0x28, 0x25, 0x24, |
| 128 | 0x26, 0x15, 0x13, 0x11, 0x18, |
| 129 | 0x1e, 0x1c, 0x00, 0x00, 0x1a, |
| 130 | 0x20, 0x28, 0x25, 0x24, 0x26, |
| 131 | 0x15, 0x13, 0x11, 0x18, 0x1e, |
| 132 | 0x1c, 0x00); |
| 133 | dsi_generic_write_seq(dsi, R69328_GAMMA_SET_B, 0x00, |
| 134 | 0x1a, 0x20, 0x28, 0x25, 0x24, |
| 135 | 0x26, 0x15, 0x13, 0x11, 0x18, |
| 136 | 0x1e, 0x1c, 0x00, 0x00, 0x1a, |
| 137 | 0x20, 0x28, 0x25, 0x24, 0x26, |
| 138 | 0x15, 0x13, 0x11, 0x18, 0x1e, |
| 139 | 0x1c, 0x00); |
| 140 | dsi_generic_write_seq(dsi, R69328_GAMMA_SET_C, 0x00, |
| 141 | 0x1a, 0x20, 0x28, 0x25, 0x24, |
| 142 | 0x26, 0x15, 0x13, 0x11, 0x18, |
| 143 | 0x1e, 0x1c, 0x00, 0x00, 0x1a, |
| 144 | 0x20, 0x28, 0x25, 0x24, 0x26, |
| 145 | 0x15, 0x13, 0x11, 0x18, 0x1e, |
| 146 | 0x1c, 0x00); |
| 147 | |
| 148 | /* MACP On */ |
| 149 | dsi_generic_write_seq(dsi, R69328_MACP, 0x03); |
| 150 | |
| 151 | ret = mipi_dsi_dcs_set_display_on(dsi); |
| 152 | if (ret < 0) { |
| 153 | log_err("failed to set display on: %d\n", ret); |
| 154 | return ret; |
| 155 | } |
| 156 | |
| 157 | mdelay(50); |
| 158 | |
| 159 | ret = backlight_enable(priv->backlight); |
| 160 | if (ret) |
| 161 | return ret; |
| 162 | |
| 163 | ret = backlight_set_brightness(priv->backlight, percent); |
| 164 | if (ret) |
| 165 | return ret; |
| 166 | |
| 167 | return 0; |
| 168 | } |
| 169 | |
| 170 | static int renesas_r69328_timings(struct udevice *dev, |
| 171 | struct display_timing *timing) |
| 172 | { |
| 173 | memcpy(timing, &default_timing, sizeof(*timing)); |
| 174 | return 0; |
| 175 | } |
| 176 | |
| 177 | static int renesas_r69328_of_to_plat(struct udevice *dev) |
| 178 | { |
| 179 | struct renesas_r69328_priv *priv = dev_get_priv(dev); |
| 180 | int ret; |
| 181 | |
| 182 | ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev, |
| 183 | "backlight", &priv->backlight); |
| 184 | if (ret) { |
| 185 | log_err("cannot get backlight: ret = %d\n", ret); |
| 186 | return ret; |
| 187 | } |
| 188 | |
| 189 | ret = gpio_request_by_name(dev, "enable-gpios", 0, |
| 190 | &priv->enable_gpio, GPIOD_IS_OUT); |
| 191 | if (ret) { |
| 192 | log_err("could not decode enable-gpios (%d)\n", ret); |
| 193 | return ret; |
| 194 | } |
| 195 | |
| 196 | ret = gpio_request_by_name(dev, "reset-gpios", 0, |
| 197 | &priv->reset_gpio, GPIOD_IS_OUT); |
| 198 | if (ret) { |
| 199 | log_err("could not decode reser-gpios (%d)\n", ret); |
| 200 | return ret; |
| 201 | } |
| 202 | |
| 203 | return 0; |
| 204 | } |
| 205 | |
| 206 | static int renesas_r69328_probe(struct udevice *dev) |
| 207 | { |
| 208 | struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); |
| 209 | |
| 210 | /* fill characteristics of DSI data link */ |
| 211 | plat->lanes = 4; |
| 212 | plat->format = MIPI_DSI_FMT_RGB888; |
| 213 | plat->mode_flags = MIPI_DSI_MODE_VIDEO; |
| 214 | |
| 215 | return 0; |
| 216 | } |
| 217 | |
| 218 | static const struct panel_ops renesas_r69328_ops = { |
| 219 | .enable_backlight = renesas_r69328_enable_backlight, |
| 220 | .set_backlight = renesas_r69328_set_backlight, |
| 221 | .get_display_timing = renesas_r69328_timings, |
| 222 | }; |
| 223 | |
| 224 | static const struct udevice_id renesas_r69328_ids[] = { |
| 225 | { .compatible = "jdi,dx12d100vm0eaa" }, |
| 226 | { } |
| 227 | }; |
| 228 | |
| 229 | U_BOOT_DRIVER(renesas_r69328) = { |
| 230 | .name = "renesas_r69328", |
| 231 | .id = UCLASS_PANEL, |
| 232 | .of_match = renesas_r69328_ids, |
| 233 | .ops = &renesas_r69328_ops, |
| 234 | .of_to_plat = renesas_r69328_of_to_plat, |
| 235 | .probe = renesas_r69328_probe, |
| 236 | .plat_auto = sizeof(struct mipi_dsi_panel_plat), |
| 237 | .priv_auto = sizeof(struct renesas_r69328_priv), |
| 238 | }; |