| Konstantin Porotchkin | 1232e2e | 2021-05-11 08:11:24 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright (C) 2018-2021 Marvell International Ltd. |
| 4 | */ |
| 5 | |
| 6 | #undef CP110_NAME |
| 7 | #undef CP110_NUM |
| 8 | #undef CP110_PCIE_MEM_SIZE |
| 9 | #undef CP110_PCIEx_CPU_MEM_BASE |
| 10 | #undef CP110_PCIEx_BUS_MEM_BASE |
| 11 | |
| 12 | /* CP110-1 Settings */ |
| 13 | #define CP110_NAME cp1 |
| 14 | #define CP110_NUM 1 |
| 15 | #define CP110_PCIE_MEM_SIZE(iface) (0xf00000) |
| 16 | #define CP110_PCIEx_CPU_MEM_BASE(iface) (0xe2000000 + (iface) * 0x1000000) |
| 17 | #define CP110_PCIEx_BUS_MEM_BASE(iface) (CP110_PCIEx_CPU_MEM_BASE(iface)) |
| 18 | |
| 19 | #include "armada-cp110.dtsi" |
| 20 | |
| 21 | / { |
| 22 | model = "Marvell CN9131 development board"; |
| 23 | compatible = "marvell,cn9131-db"; |
| 24 | |
| 25 | aliases { |
| 26 | gpio3 = &cp1_gpio0; |
| 27 | gpio4 = &cp1_gpio1; |
| 28 | }; |
| 29 | |
| 30 | cp1 { |
| 31 | config-space { |
| 32 | cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { |
| 33 | compatible = "regulator-fixed"; |
| 34 | pinctrl-names = "default"; |
| 35 | pinctrl-0 = <&cp1_xhci0_vbus_pins>; |
| 36 | regulator-name = "cp1-xhci0-vbus"; |
| 37 | regulator-min-microvolt = <5000000>; |
| 38 | regulator-max-microvolt = <5000000>; |
| 39 | startup-delay-us = <100000>; |
| 40 | regulator-force-boot-off; |
| 41 | gpio = <&cp1_gpio0 3 GPIO_ACTIVE_HIGH>; |
| 42 | }; |
| 43 | cp1_reg_usb3_current_lim0: cp1_usb3_current_limiter@0 { |
| 44 | compatible = "regulator-fixed"; |
| 45 | regulator-min-microamp = <900000>; |
| 46 | regulator-max-microamp = <900000>; |
| 47 | regulator-force-boot-off; |
| 48 | gpio = <&cp1_gpio0 2 GPIO_ACTIVE_HIGH>; |
| 49 | }; |
| 50 | cp1_pcie_reset_pins: cp1-pcie-reset-pins { |
| 51 | marvell,pins = <0>; |
| 52 | marvell,function = <0>; |
| 53 | }; |
| 54 | }; |
| 55 | }; |
| 56 | }; |
| 57 | |
| 58 | &cp1_i2c0 { |
| 59 | pinctrl-names = "default"; |
| 60 | pinctrl-0 = <&cp1_i2c0_pins>; |
| 61 | status = "okay"; |
| 62 | clock-frequency = <100000>; |
| 63 | }; |
| 64 | |
| 65 | /* CON40 */ |
| 66 | &cp1_pcie0 { |
| 67 | pinctrl-names = "default"; |
| 68 | pinctrl-0 = <&cp1_pcie_reset_pins>; |
| 69 | marvell,reset-gpio = <&cp1_gpio0 0 GPIO_ACTIVE_LOW>; |
| 70 | status = "okay"; |
| 71 | num-lanes = <2>; |
| 72 | /* non-prefetchable memory */ |
| 73 | ranges = <0x82000000 0 0xe2000000 0 0xe2000000 0 0xf00000>; |
| 74 | }; |
| 75 | |
| 76 | &cp1_pinctl { |
| 77 | compatible = "marvell,mvebu-pinctrl", |
| 78 | "marvell,cp115-standalone-pinctrl"; |
| 79 | bank-name ="cp1-110"; |
| 80 | |
| 81 | /* MPP Bus: |
| 82 | * [0-12] GPIO |
| 83 | * [13-16] SPI1 |
| 84 | * [17-27] GPIO (Default) |
| 85 | * [28] SATA1_PRESENT_ACTIVEn |
| 86 | * [29-34] GPIO (Default) |
| 87 | * [35-36] xSMI |
| 88 | * [37-38] I2C0 |
| 89 | * [39-62] GPIO |
| 90 | */ |
| 91 | /* 0 1 2 3 4 5 6 7 8 9 */ |
| 92 | pin-func = < 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 |
| 93 | 0x0 0x0 0x0 0x3 0x3 0x3 0x3 0x0 0x0 0x0 |
| 94 | 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x9 0x0 |
| 95 | 0x0 0x0 0x0 0x0 0x0 0x7 0x7 0x2 0x2 0x0 |
| 96 | 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 |
| 97 | 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 |
| 98 | 0x0 0x0 0x0 >; |
| 99 | |
| 100 | cp1_i2c0_pins: cp1-i2c-pins-0 { |
| 101 | marvell,pins = < 37 38 >; |
| 102 | marvell,function = <2>; |
| 103 | }; |
| 104 | cp1_spi0_pins: cp1-spi-pins-0 { |
| 105 | marvell,pins = < 13 14 15 16 >; |
| 106 | marvell,function = <3>; |
| 107 | }; |
| 108 | cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { |
| 109 | marvell,pins = <3>; |
| 110 | marvell,function = <0>; |
| 111 | }; |
| 112 | }; |
| 113 | |
| 114 | /* CON32 */ |
| 115 | &cp1_sata0 { |
| 116 | status = "okay"; |
| 117 | }; |
| 118 | |
| 119 | /* U24 */ |
| 120 | &cp1_spi1 { |
| 121 | pinctrl-names = "default"; |
| 122 | pinctrl-0 = <&cp1_spi0_pins>; |
| 123 | reg = <0x700680 0x50>, /* control */ |
| 124 | <0x2000000 0x1000000>, /* CS0 */ |
| 125 | <0 0xffffffff>, /* CS1 */ |
| 126 | <0 0xffffffff>, /* CS2 */ |
| 127 | <0 0xffffffff>; /* CS3 */ |
| 128 | status = "okay"; |
| 129 | |
| 130 | spi-flash@0 { |
| 131 | #address-cells = <0x1>; |
| 132 | #size-cells = <0x1>; |
| 133 | compatible = "jedec,spi-nor", "spi-flash"; |
| 134 | reg = <0x0>; |
| 135 | /* On-board MUX does not allow higher frequencies */ |
| 136 | spi-max-frequency = <40000000>; |
| 137 | |
| 138 | partitions { |
| 139 | compatible = "fixed-partitions"; |
| 140 | #address-cells = <1>; |
| 141 | #size-cells = <1>; |
| 142 | |
| 143 | partition@0 { |
| 144 | label = "U-Boot"; |
| 145 | reg = <0x0 0x200000>; |
| 146 | }; |
| 147 | |
| 148 | partition@400000 { |
| 149 | label = "Filesystem"; |
| 150 | reg = <0x200000 0xe00000>; |
| 151 | }; |
| 152 | }; |
| 153 | }; |
| 154 | }; |
| 155 | |
| 156 | /* CON58 */ |
| 157 | &cp1_usb3_1 { |
| 158 | vbus-supply = <&cp1_reg_usb3_vbus0>; |
| 159 | current-limiter = <&cp1_reg_usb3_current_lim0>; |
| 160 | vbus-disable-delay = <500>; |
| 161 | status = "okay"; |
| 162 | }; |
| 163 | |
| 164 | &cp1_utmi1 { |
| 165 | status = "okay"; |
| 166 | }; |