blob: 2946ca105577bcc28d23ccc94b6304fc0d7d9c91 [file] [log] [blame]
wdenk3203c8f2004-07-10 21:45:47 +00001/*
2 * (C) Copyright 2003,Motorola Inc.
3 * Xianghua Xiao, (X.Xiao@motorola.com)
4 *
5 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
6 *
7 * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
8 * Added support for Wind River SBC8560 board
9 *
10 * See file CREDITS for list of people who contributed to this
11 * project.
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; either version 2 of
16 * the License, or (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 * MA 02111-1307 USA
27 */
28
29
wdenk3203c8f2004-07-10 21:45:47 +000030#include <common.h>
31#include <asm/processor.h>
32#include <asm/immap_85xx.h>
33#include <ioports.h>
Jon Loeligerde9737d2008-03-04 10:03:03 -060034#include <spd_sdram.h>
wdenk3203c8f2004-07-10 21:45:47 +000035#include <miiphy.h>
36
37long int fixed_sdram (void);
38
39/*
40 * I/O Port configuration table
41 *
42 * if conf is 1, then that port pin will be configured at boot time
43 * according to the five values podr/pdir/ppar/psor/pdat for that entry
44 */
45
46const iop_conf_t iop_conf_tab[4][32] = {
47
48 /* Port A configuration */
49 { /* conf ppar psor pdir podr pdat */
50 /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
51 /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
52 /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
53 /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
54 /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
55 /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
56 /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
57 /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
58 /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
59 /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
60 /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
61 /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
62 /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
63 /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
64 /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
65 /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
66 /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
67 /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
68 /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
69 /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
70 /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
71 /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
72 /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
73 /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
74 /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
75 /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
76 /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
77 /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
78 /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
79 /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
80 /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
81 /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
82 },
83
84 /* Port B configuration */
85 { /* conf ppar psor pdir podr pdat */
86 /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
87 /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
88 /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
89 /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
90 /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
91 /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
92 /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
93 /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
94 /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
95 /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
96 /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
97 /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
98 /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
99 /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
100 /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
101 /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
102 /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
103 /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
104 /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */
105 /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
106 /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
107 /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
108 /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
109 /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
110 /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
111 /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
112 /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
113 /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
114 /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
115 /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
116 /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
117 /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
118 },
119
120 /* Port C */
121 { /* conf ppar psor pdir podr pdat */
122 /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
123 /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
124 /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
125 /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
126 /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
127 /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
128 /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
129 /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
130 /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
131 /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
132 /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
133 /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
134 /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
135 /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
136 /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
137 /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
138 /* PC15 */ { 1, 1, 0, 0, 0, 0 }, /* PC15 */
139 /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
140 /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
141 /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
142 /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
143 /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */
144 /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */
145 /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
146 /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
147 /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
148 /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
149 /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
150 /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
151 /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
152 /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
153 /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
154 },
155
156 /* Port D */
157 { /* conf ppar psor pdir podr pdat */
158 /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
159 /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
160 /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 RTS */
161 /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
162 /* PD27 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */
163 /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 RTS */
164 /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
165 /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
166 /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
167 /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
168 /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
169 /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
170 /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
171 /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
172 /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
173 /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
174 /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
175 /* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */
176 /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
177 /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
178 /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
179 /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
180 /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
181 /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
182 /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
183 /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
184 /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
185 /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
186 /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
187 /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
188 /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
189 /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
190 }
191};
192
193int board_early_init_f (void)
194{
195#if defined(CONFIG_PCI)
Kumar Gala0a7a0972007-11-29 02:10:09 -0600196 volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
wdenk3203c8f2004-07-10 21:45:47 +0000197
198 pci->peer &= 0xfffffffdf; /* disable master abort */
199#endif
200 return 0;
201}
202
203void reset_phy (void)
204{
205#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
206 volatile unsigned char *bcsr = (unsigned char *) CFG_BCSR;
207#endif
208 /* reset Giga bit Ethernet port if needed here */
209
210 /* reset the CPM FEC port */
211#if (CONFIG_ETHER_INDEX == 2)
212 bcsr[0] &= ~0x20;
213 udelay(2);
214 bcsr[0] |= 0x20;
215 udelay(1000);
216#elif (CONFIG_ETHER_INDEX == 3)
217 bcsr[0] &= ~0x10;
218 udelay(2);
219 bcsr[0] |= 0x10;
220 udelay(1000);
221#endif
222#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
Marian Balakowiczaab8c492005-10-28 22:30:33 +0200223 /* reset PHY */
224 miiphy_reset("FCC1 ETHERNET", 0x0);
225
226 /* change PHY address to 0x02 */
227 bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
228
229 bb_miiphy_write(NULL, 0x02, PHY_BMCR,
230 PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
wdenk3203c8f2004-07-10 21:45:47 +0000231#endif /* CONFIG_MII */
232}
233
234int checkboard (void)
235{
236 sys_info_t sysinfo;
237
238 get_sys_info (&sysinfo);
239
wdenkadf849c2004-10-10 22:44:24 +0000240#ifdef CONFIG_SBC8560
wdenk3203c8f2004-07-10 21:45:47 +0000241 printf ("Board: Wind River SBC8560 Board\n");
wdenkadf849c2004-10-10 22:44:24 +0000242#else
243 printf ("Board: Wind River SBC8540 Board\n");
244#endif
wdenk3203c8f2004-07-10 21:45:47 +0000245 printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
246 printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
247 printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
248 if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
249 || (CFG_LBC_LCRR & 0x0f) == 8) {
250 printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f));
251 } else {
252 printf("\tLBC: unknown\n");
253 }
254 printf("\tCPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
255 printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
256 return (0);
257}
258
259
Becky Brucebd99ae72008-06-09 16:03:40 -0500260phys_size_t initdram (int board_type)
wdenk3203c8f2004-07-10 21:45:47 +0000261{
262 long dram_size = 0;
Jon Loeligerde9737d2008-03-04 10:03:03 -0600263
wdenk7ac16102004-08-01 22:48:16 +0000264#if 0
wdenk3203c8f2004-07-10 21:45:47 +0000265#if !defined(CONFIG_RAM_AS_FLASH)
Kumar Gala0a7a0972007-11-29 02:10:09 -0600266 volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
wdenk3203c8f2004-07-10 21:45:47 +0000267 sys_info_t sysinfo;
268 uint temp_lbcdll = 0;
269#endif
wdenk7ac16102004-08-01 22:48:16 +0000270#endif /* 0 */
wdenk3203c8f2004-07-10 21:45:47 +0000271#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
Kumar Galaec1340d2007-11-27 23:25:02 -0600272 volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
wdenk3203c8f2004-07-10 21:45:47 +0000273#endif
274#if defined(CONFIG_DDR_DLL)
275 uint temp_ddrdll = 0;
276
277 /* Work around to stabilize DDR DLL */
278 temp_ddrdll = gur->ddrdllcr;
279 gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
280 asm("sync;isync;msync");
281#endif
282
283#if defined(CONFIG_SPD_EEPROM)
284 dram_size = spd_sdram ();
285#else
286 dram_size = fixed_sdram ();
287#endif
288
wdenk7ac16102004-08-01 22:48:16 +0000289#if 0
wdenk3203c8f2004-07-10 21:45:47 +0000290#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
291 get_sys_info(&sysinfo);
292 /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
293 if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
294 lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
295 } else {
296#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */
297 lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */
298#endif
299 lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
300 udelay(200);
301 temp_lbcdll = gur->lbcdllcr;
302 gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
303 asm("sync;isync;msync");
304 }
305 lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
306 lbc->br2 = CFG_BR2_PRELIM;
307 lbc->lbcr = CFG_LBC_LBCR;
308 lbc->lsdmr = CFG_LBC_LSDMR_1;
309 asm("sync");
310 (unsigned int) * (ulong *)0 = 0x000000ff;
311 lbc->lsdmr = CFG_LBC_LSDMR_2;
312 asm("sync");
313 (unsigned int) * (ulong *)0 = 0x000000ff;
314 lbc->lsdmr = CFG_LBC_LSDMR_3;
315 asm("sync");
316 (unsigned int) * (ulong *)0 = 0x000000ff;
317 lbc->lsdmr = CFG_LBC_LSDMR_4;
318 asm("sync");
319 (unsigned int) * (ulong *)0 = 0x000000ff;
320 lbc->lsdmr = CFG_LBC_LSDMR_5;
321 asm("sync");
322 lbc->lsrt = CFG_LBC_LSRT;
323 asm("sync");
324 lbc->mrtpr = CFG_LBC_MRTPR;
325 asm("sync");
326#endif
327#endif
328
329#if defined(CONFIG_DDR_ECC)
330 {
331 /* Initialize all of memory for ECC, then
332 * enable errors */
333 uint *p = 0;
334 uint i = 0;
Kumar Gala0a7a0972007-11-29 02:10:09 -0600335 volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
wdenk3203c8f2004-07-10 21:45:47 +0000336 dma_init();
337 for (*p = 0; p < (uint *)(8 * 1024); p++) {
338 if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
339 *p = (unsigned int)0xdeadbeef;
340 if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
341 }
342
343 /* 8K */
344 dma_xfer((uint *)0x2000,0x2000,(uint *)0);
345 /* 16K */
346 dma_xfer((uint *)0x4000,0x4000,(uint *)0);
347 /* 32K */
348 dma_xfer((uint *)0x8000,0x8000,(uint *)0);
349 /* 64K */
350 dma_xfer((uint *)0x10000,0x10000,(uint *)0);
351 /* 128k */
352 dma_xfer((uint *)0x20000,0x20000,(uint *)0);
353 /* 256k */
354 dma_xfer((uint *)0x40000,0x40000,(uint *)0);
355 /* 512k */
356 dma_xfer((uint *)0x80000,0x80000,(uint *)0);
357 /* 1M */
358 dma_xfer((uint *)0x100000,0x100000,(uint *)0);
359 /* 2M */
360 dma_xfer((uint *)0x200000,0x200000,(uint *)0);
361 /* 4M */
362 dma_xfer((uint *)0x400000,0x400000,(uint *)0);
363
364 for (i = 1; i < dram_size / 0x800000; i++) {
365 dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
366 }
367
368 /* Enable errors for ECC */
369 ddr->err_disable = 0x00000000;
370 asm("sync;isync;msync");
371 }
372#endif
373
374 return dram_size;
375}
376
377
378#if defined(CFG_DRAM_TEST)
379int testdram (void)
380{
381 uint *pstart = (uint *) CFG_MEMTEST_START;
382 uint *pend = (uint *) CFG_MEMTEST_END;
383 uint *p;
384
385 printf("SDRAM test phase 1:\n");
386 for (p = pstart; p < pend; p++)
387 *p = 0xaaaaaaaa;
388
389 for (p = pstart; p < pend; p++) {
390 if (*p != 0xaaaaaaaa) {
391 printf ("SDRAM test fails at: %08x\n", (uint) p);
392 return 1;
393 }
394 }
395
396 printf("SDRAM test phase 2:\n");
397 for (p = pstart; p < pend; p++)
398 *p = 0x55555555;
399
400 for (p = pstart; p < pend; p++) {
401 if (*p != 0x55555555) {
402 printf ("SDRAM test fails at: %08x\n", (uint) p);
403 return 1;
404 }
405 }
406
407 printf("SDRAM test passed.\n");
408 return 0;
409}
410#endif
411
412#if !defined(CONFIG_SPD_EEPROM)
413/*************************************************************************
414 * fixed sdram init -- doesn't use serial presence detect.
415 ************************************************************************/
416long int fixed_sdram (void)
417{
418
419#define CFG_DDR_CONTROL 0xc2000000
420
421 #ifndef CFG_RAMBOOT
Kumar Gala0a7a0972007-11-29 02:10:09 -0600422 volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
wdenk3203c8f2004-07-10 21:45:47 +0000423
424 ddr->cs0_bnds = 0x00000007;
425 ddr->cs1_bnds = 0x0010001f;
426 ddr->cs2_bnds = 0x00000000;
427 ddr->cs3_bnds = 0x00000000;
428 ddr->cs0_config = 0x80000102;
429 ddr->cs1_config = 0x80000102;
430 ddr->cs2_config = 0x00000000;
431 ddr->cs3_config = 0x00000000;
432 ddr->timing_cfg_1 = 0x37334321;
433 ddr->timing_cfg_2 = 0x00000800;
434 ddr->sdram_cfg = 0x42000000;
435 ddr->sdram_mode = 0x00000022;
436 ddr->sdram_interval = 0x05200100;
437 ddr->err_sbe = 0x00ff0000;
438 #if defined (CONFIG_DDR_ECC)
439 ddr->err_disable = 0x0000000D;
440 #endif
441 asm("sync;isync;msync");
442 udelay(500);
443 #if defined (CONFIG_DDR_ECC)
444 /* Enable ECC checking */
445 ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
446 #else
447 ddr->sdram_cfg = CFG_DDR_CONTROL;
448 #endif
449 asm("sync; isync; msync");
450 udelay(500);
451 #endif
452 return CFG_SDRAM_SIZE * 1024 * 1024;
453}
454#endif /* !defined(CONFIG_SPD_EEPROM) */