Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / bd46e0eec0db6c887dde7e05b82347fbdab761f5 / . / arch / arm / dts / dra72-evm.dts
blob: efb544c6bb6d49d9f9a1dfc311af5a9cd45ef492 [file] [log] [blame]
Tom Rinie33af1c2015-07-31 19:55:12 -0400[diff] [blame]1/*
2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra72x.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12
13/ {
14 model = "TI DRA722";
15 compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
16
17 chosen {
18 stdout-path = &uart1;
19 };
20
21 memory {
22 device_type = "memory";
23 reg = <0x80000000 0x40000000>; /* 1024 MB */
24 };
25
26 aliases {
27 display0 = &hdmi0;
28 };
29
30 evm_3v3: fixedregulator-evm_3v3 {
31 compatible = "regulator-fixed";
32 regulator-name = "evm_3v3";
33 regulator-min-microvolt = <3300000>;
34 regulator-max-microvolt = <3300000>;
35 };
36
37 extcon_usb1: extcon_usb1 {
38 compatible = "linux,extcon-usb-gpio";
39 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
40 };
41
42 extcon_usb2: extcon_usb2 {
43 compatible = "linux,extcon-usb-gpio";
44 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
45 };
46
47 hdmi0: connector {
48 compatible = "hdmi-connector";
49 label = "hdmi";
50
51 type = "a";
52
53 port {
54 hdmi_connector_in: endpoint {
55 remote-endpoint = <&tpd12s015_out>;
56 };
57 };
58 };
59
60 tpd12s015: encoder {
61 compatible = "ti,tpd12s015";
62
63 pinctrl-names = "default";
64 pinctrl-0 = <&tpd12s015_pins>;
65
66 gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
67 <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
68 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
69
70 ports {
71 #address-cells = <1>;
72 #size-cells = <0>;
73
74 port@0 {
75 reg = <0>;
76
77 tpd12s015_in: endpoint {
78 remote-endpoint = <&hdmi_out>;
79 };
80 };
81
82 port@1 {
83 reg = <1>;
84
85 tpd12s015_out: endpoint {
86 remote-endpoint = <&hdmi_connector_in>;
87 };
88 };
89 };
90 };
91};
92
93&dra7_pmx_core {
94 i2c1_pins: pinmux_i2c1_pins {
95 pinctrl-single,pins = <
96 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
97 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
98 >;
99 };
100
101 i2c5_pins: pinmux_i2c5_pins {
102 pinctrl-single,pins = <
103 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
104 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
105 >;
106 };
107
108 nand_default: nand_default {
109 pinctrl-single,pins = <
110 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
111 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
112 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
113 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
114 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
115 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
116 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
117 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
118 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
119 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
120 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
121 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
122 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
123 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
124 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
125 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
126 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
127 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
128 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
129 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
130 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
131 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
132 >;
133 };
134
135 usb1_pins: pinmux_usb1_pins {
136 pinctrl-single,pins = <
137 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
138 >;
139 };
140
141 usb2_pins: pinmux_usb2_pins {
142 pinctrl-single,pins = <
143 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
144 >;
145 };
146
147 tps65917_pins_default: tps65917_pins_default {
148 pinctrl-single,pins = <
149 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
150 >;
151 };
152
153 mmc1_pins_default: mmc1_pins_default {
154 pinctrl-single,pins = <
155 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
156 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
157 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
158 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
159 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
160 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
161 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
162 >;
163 };
164
165 mmc2_pins_default: mmc2_pins_default {
166 pinctrl-single,pins = <
167 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
168 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
169 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
170 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
171 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
172 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
173 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
174 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
175 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
176 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
177 >;
178 };
179
180 dcan1_pins_default: dcan1_pins_default {
181 pinctrl-single,pins = <
182 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
183 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
184 >;
185 };
186
187 dcan1_pins_sleep: dcan1_pins_sleep {
188 pinctrl-single,pins = <
189 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
190 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
191 >;
192 };
193
194 qspi1_pins: pinmux_qspi1_pins {
195 pinctrl-single,pins = <
196 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
197 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
198 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
199 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
200 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
201 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
202 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
203 >;
204 };
205
206 hdmi_pins: pinmux_hdmi_pins {
207 pinctrl-single,pins = <
208 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
209 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
210 >;
211 };
212
213 tpd12s015_pins: pinmux_tpd12s015_pins {
214 pinctrl-single,pins = <
215 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
216 >;
217 };
218};
219
220&i2c1 {
221 status = "okay";
222 pinctrl-names = "default";
223 pinctrl-0 = <&i2c1_pins>;
224 clock-frequency = <400000>;
225
226 tps65917: tps65917@58 {
227 compatible = "ti,tps65917";
228 reg = <0x58>;
229
230 pinctrl-names = "default";
231 pinctrl-0 = <&tps65917_pins_default>;
232
233 interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
234 interrupt-controller;
235 #interrupt-cells = <2>;
236
237 ti,system-power-controller;
238
239 tps65917_pmic {
240 compatible = "ti,tps65917-pmic";
241
242 regulators {
243 smps1_reg: smps1 {
244 /* VDD_MPU */
245 regulator-name = "smps1";
246 regulator-min-microvolt = <850000>;
247 regulator-max-microvolt = <1250000>;
248 regulator-always-on;
249 regulator-boot-on;
250 };
251
252 smps2_reg: smps2 {
253 /* VDD_CORE */
254 regulator-name = "smps2";
255 regulator-min-microvolt = <850000>;
256 regulator-max-microvolt = <1060000>;
257 regulator-boot-on;
258 regulator-always-on;
259 };
260
261 smps3_reg: smps3 {
262 /* VDD_GPU IVA DSPEVE */
263 regulator-name = "smps3";
264 regulator-min-microvolt = <850000>;
265 regulator-max-microvolt = <1250000>;
266 regulator-boot-on;
267 regulator-always-on;
268 };
269
270 smps4_reg: smps4 {
271 /* VDDS1V8 */
272 regulator-name = "smps4";
273 regulator-min-microvolt = <1800000>;
274 regulator-max-microvolt = <1800000>;
275 regulator-always-on;
276 regulator-boot-on;
277 };
278
279 smps5_reg: smps5 {
280 /* VDD_DDR */
281 regulator-name = "smps5";
282 regulator-min-microvolt = <1350000>;
283 regulator-max-microvolt = <1350000>;
284 regulator-boot-on;
285 regulator-always-on;
286 };
287
288 ldo1_reg: ldo1 {
289 /* LDO1_OUT --> SDIO */
290 regulator-name = "ldo1";
291 regulator-min-microvolt = <1800000>;
292 regulator-max-microvolt = <3300000>;
293 regulator-boot-on;
294 };
295
296 ldo2_reg: ldo2 {
297 /* LDO2_OUT --> TP1017 (UNUSED) */
298 regulator-name = "ldo2";
299 regulator-min-microvolt = <1800000>;
300 regulator-max-microvolt = <3300000>;
301 };
302
303 ldo3_reg: ldo3 {
304 /* VDDA_1V8_PHY */
305 regulator-name = "ldo3";
306 regulator-min-microvolt = <1800000>;
307 regulator-max-microvolt = <1800000>;
308 regulator-boot-on;
309 regulator-always-on;
310 };
311
312 ldo5_reg: ldo5 {
313 /* VDDA_1V8_PLL */
314 regulator-name = "ldo5";
315 regulator-min-microvolt = <1800000>;
316 regulator-max-microvolt = <1800000>;
317 regulator-always-on;
318 regulator-boot-on;
319 };
320
321 ldo4_reg: ldo4 {
322 /* VDDA_3V_USB: VDDA_USBHS33 */
323 regulator-name = "ldo4";
324 regulator-min-microvolt = <3300000>;
325 regulator-max-microvolt = <3300000>;
326 regulator-boot-on;
327 };
328 };
329 };
330
331 tps65917_power_button {
332 compatible = "ti,palmas-pwrbutton";
333 interrupt-parent = <&tps65917>;
334 interrupts = <1 IRQ_TYPE_NONE>;
335 wakeup-source;
336 ti,palmas-long-press-seconds = <6>;
337 };
338 };
339
340 pcf_gpio_21: gpio@21 {
341 compatible = "ti,pcf8575";
342 reg = <0x21>;
343 lines-initial-states = <0x1408>;
344 gpio-controller;
345 #gpio-cells = <2>;
346 interrupt-parent = <&gpio6>;
347 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
348 interrupt-controller;
349 #interrupt-cells = <2>;
350 };
351};
352
353&i2c5 {
354 status = "okay";
355 pinctrl-names = "default";
356 pinctrl-0 = <&i2c5_pins>;
357 clock-frequency = <400000>;
358
359 pcf_hdmi: pcf8575@26 {
360 compatible = "nxp,pcf8575";
361 reg = <0x26>;
362 gpio-controller;
363 #gpio-cells = <2>;
364 /*
365 * initial state is used here to keep the mdio interface
366 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
367 * VIN2_S0 driven high otherwise Ethernet stops working
368 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
369 */
370 lines-initial-states = <0x0f2b>;
371 };
372};
373
374&uart1 {
375 status = "okay";
376};
377
378&elm {
379 status = "okay";
380};
381
382&gpmc {
383 status = "okay";
384 pinctrl-names = "default";
385 pinctrl-0 = <&nand_default>;
386 ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
387 nand@0,0 {
388 /* To use NAND, DIP switch SW5 must be set like so:
389 * SW5.1 (NAND_SELn) = ON (LOW)
390 * SW5.9 (GPMC_WPN) = OFF (HIGH)
391 */
392 reg = <0 0 4>; /* device IO registers */
393 ti,nand-ecc-opt = "bch8";
394 ti,elm-id = <&elm>;
395 nand-bus-width = <16>;
396 gpmc,device-width = <2>;
397 gpmc,sync-clk-ps = <0>;
398 gpmc,cs-on-ns = <0>;
399 gpmc,cs-rd-off-ns = <80>;
400 gpmc,cs-wr-off-ns = <80>;
401 gpmc,adv-on-ns = <0>;
402 gpmc,adv-rd-off-ns = <60>;
403 gpmc,adv-wr-off-ns = <60>;
404 gpmc,we-on-ns = <10>;
405 gpmc,we-off-ns = <50>;
406 gpmc,oe-on-ns = <4>;
407 gpmc,oe-off-ns = <40>;
408 gpmc,access-ns = <40>;
409 gpmc,wr-access-ns = <80>;
410 gpmc,rd-cycle-ns = <80>;
411 gpmc,wr-cycle-ns = <80>;
412 gpmc,bus-turnaround-ns = <0>;
413 gpmc,cycle2cycle-delay-ns = <0>;
414 gpmc,clk-activation-ns = <0>;
415 gpmc,wait-monitoring-ns = <0>;
416 gpmc,wr-data-mux-bus-ns = <0>;
417 /* MTD partition table */
418 /* All SPL-* partitions are sized to minimal length
419 * which can be independently programmable. For
420 * NAND flash this is equal to size of erase-block */
421 #address-cells = <1>;
422 #size-cells = <1>;
423 partition@0 {
424 label = "NAND.SPL";
425 reg = <0x00000000 0x000020000>;
426 };
427 partition@1 {
428 label = "NAND.SPL.backup1";
429 reg = <0x00020000 0x00020000>;
430 };
431 partition@2 {
432 label = "NAND.SPL.backup2";
433 reg = <0x00040000 0x00020000>;
434 };
435 partition@3 {
436 label = "NAND.SPL.backup3";
437 reg = <0x00060000 0x00020000>;
438 };
439 partition@4 {
440 label = "NAND.u-boot-spl-os";
441 reg = <0x00080000 0x00040000>;
442 };
443 partition@5 {
444 label = "NAND.u-boot";
445 reg = <0x000c0000 0x00100000>;
446 };
447 partition@6 {
448 label = "NAND.u-boot-env";
449 reg = <0x001c0000 0x00020000>;
450 };
451 partition@7 {
452 label = "NAND.u-boot-env.backup1";
453 reg = <0x001e0000 0x00020000>;
454 };
455 partition@8 {
456 label = "NAND.kernel";
457 reg = <0x00200000 0x00800000>;
458 };
459 partition@9 {
460 label = "NAND.file-system";
461 reg = <0x00a00000 0x0f600000>;
462 };
463 };
464};
465
466&usb2_phy1 {
467 phy-supply = <&ldo4_reg>;
468};
469
470&usb2_phy2 {
471 phy-supply = <&ldo4_reg>;
472};
473
474&omap_dwc3_1 {
475 extcon = <&extcon_usb1>;
476};
477
478&omap_dwc3_2 {
479 extcon = <&extcon_usb2>;
480};
481
482&usb1 {
483 dr_mode = "peripheral";
484 pinctrl-names = "default";
485 pinctrl-0 = <&usb1_pins>;
486};
487
488&usb2 {
489 dr_mode = "host";
490 pinctrl-names = "default";
491 pinctrl-0 = <&usb2_pins>;
492};
493
494&mmc1 {
495 status = "okay";
496 pinctrl-names = "default";
497 pinctrl-0 = <&mmc1_pins_default>;
498
499 vmmc-supply = <&ldo1_reg>;
500 bus-width = <4>;
501 /*
502 * SDCD signal is not being used here - using the fact that GPIO mode
503 * is a viable alternative
504 */
505 cd-gpios = <&gpio6 27 0>;
506};
507
508&mmc2 {
509 /* SW5-3 in ON position */
510 status = "okay";
511 pinctrl-names = "default";
512 pinctrl-0 = <&mmc2_pins_default>;
513
514 vmmc-supply = <&evm_3v3>;
515 bus-width = <8>;
516 ti,non-removable;
517};
518
519&dra7_pmx_core {
520 cpsw_default: cpsw_default {
521 pinctrl-single,pins = <
522 /* Slave 2 */
523 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
524 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
525 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
526 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
527 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
528 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
529 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
530 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
531 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
532 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
533 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
534 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
535 >;
536
537 };
538
539 cpsw_sleep: cpsw_sleep {
540 pinctrl-single,pins = <
541 /* Slave 2 */
542 0x198 (MUX_MODE15)
543 0x19c (MUX_MODE15)
544 0x1a0 (MUX_MODE15)
545 0x1a4 (MUX_MODE15)
546 0x1a8 (MUX_MODE15)
547 0x1ac (MUX_MODE15)
548 0x1b0 (MUX_MODE15)
549 0x1b4 (MUX_MODE15)
550 0x1b8 (MUX_MODE15)
551 0x1bc (MUX_MODE15)
552 0x1c0 (MUX_MODE15)
553 0x1c4 (MUX_MODE15)
554 >;
555 };
556
557 davinci_mdio_default: davinci_mdio_default {
558 pinctrl-single,pins = <
559 /* MDIO */
560 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
561 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
562 >;
563 };
564
565 davinci_mdio_sleep: davinci_mdio_sleep {
566 pinctrl-single,pins = <
567 0x23c (MUX_MODE15)
568 0x240 (MUX_MODE15)
569 >;
570 };
571};
572
573&mac {
574 status = "okay";
575 pinctrl-names = "default", "sleep";
576 pinctrl-0 = <&cpsw_default>;
577 pinctrl-1 = <&cpsw_sleep>;
578};
579
580&cpsw_emac1 {
581 phy_id = <&davinci_mdio>, <3>;
582 phy-mode = "rgmii";
583};
584
585&davinci_mdio {
586 pinctrl-names = "default", "sleep";
587 pinctrl-0 = <&davinci_mdio_default>;
588 pinctrl-1 = <&davinci_mdio_sleep>;
589 active_slave = <1>;
590};
591
592&dcan1 {
593 status = "ok";
594 pinctrl-names = "default", "sleep", "active";
595 pinctrl-0 = <&dcan1_pins_sleep>;
596 pinctrl-1 = <&dcan1_pins_sleep>;
597 pinctrl-2 = <&dcan1_pins_default>;
598};
599
600&qspi {
601 status = "okay";
602 pinctrl-names = "default";
603 pinctrl-0 = <&qspi1_pins>;
604
605 spi-max-frequency = <48000000>;
606 m25p80@0 {
607 compatible = "s25fl256s1";
608 spi-max-frequency = <48000000>;
609 reg = <0>;
610 spi-tx-bus-width = <1>;
611 spi-rx-bus-width = <4>;
612 spi-cpol;
613 spi-cpha;
614 #address-cells = <1>;
615 #size-cells = <1>;
616
617 /* MTD partition table.
618 * The ROM checks the first four physical blocks
619 * for a valid file to boot and the flash here is
620 * 64KiB block size.
621 */
622 partition@0 {
623 label = "QSPI.SPL";
624 reg = <0x00000000 0x000010000>;
625 };
626 partition@1 {
627 label = "QSPI.SPL.backup1";
628 reg = <0x00010000 0x00010000>;
629 };
630 partition@2 {
631 label = "QSPI.SPL.backup2";
632 reg = <0x00020000 0x00010000>;
633 };
634 partition@3 {
635 label = "QSPI.SPL.backup3";
636 reg = <0x00030000 0x00010000>;
637 };
638 partition@4 {
639 label = "QSPI.u-boot";
640 reg = <0x00040000 0x00100000>;
641 };
642 partition@5 {
643 label = "QSPI.u-boot-spl-os";
644 reg = <0x00140000 0x00080000>;
645 };
646 partition@6 {
647 label = "QSPI.u-boot-env";
648 reg = <0x001c0000 0x00010000>;
649 };
650 partition@7 {
651 label = "QSPI.u-boot-env.backup1";
652 reg = <0x001d0000 0x0010000>;
653 };
654 partition@8 {
655 label = "QSPI.kernel";
656 reg = <0x001e0000 0x0800000>;
657 };
658 partition@9 {
659 label = "QSPI.file-system";
660 reg = <0x009e0000 0x01620000>;
661 };
662 };
663};
664
665&dss {
666 status = "ok";
667
668 vdda_video-supply = <&ldo5_reg>;
669};
670
671&hdmi {
672 status = "ok";
673 vdda-supply = <&ldo3_reg>;
674
675 pinctrl-names = "default";
676 pinctrl-0 = <&hdmi_pins>;
677
678 port {
679 hdmi_out: endpoint {
680 remote-endpoint = <&tpd12s015_in>;
681 };
682 };
683};