blob: 2c7928e88c1c181b80f53921cc0588c5b6b1f7b3 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Walter Schweizerd2ac3262016-10-06 23:29:56 +02002/*
3 * (C) Copyright 2011
4 * Jason Cooper <u-boot@lakedaemon.net>
5 *
6 * Based on work by:
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Siddarth Gore <gores@marvell.com>
Walter Schweizerd2ac3262016-10-06 23:29:56 +02009 */
10
11#ifndef _CONFIG_DS109_H
12#define _CONFIG_DS109_H
13
Tom Rinic6e2db42017-01-25 20:42:38 -050014/* Provide the MACH_TYPE value that the vendor kernel requires. */
15#define CONFIG_MACH_TYPE 527
Walter Schweizerd2ac3262016-10-06 23:29:56 +020016
17/*
18 * High Level Configuration Options (easy to change)
19 */
20#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
Walter Schweizerd2ac3262016-10-06 23:29:56 +020021
22/*
23 * Commands configuration
24 */
25#define CONFIG_CMD_EXT2
Walter Schweizerd2ac3262016-10-06 23:29:56 +020026
27/*
28 * mv-plug-common.h should be defined after CMD configs since it used them
29 * to enable certain macros
30 */
31#include "mv-plug-common.h"
32
33/*
34 * Environment variables configurations
35 */
36#ifdef CONFIG_SPI_FLASH
Walter Schweizerd2ac3262016-10-06 23:29:56 +020037#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
Walter Schweizerd2ac3262016-10-06 23:29:56 +020038#endif
39
40#ifdef CONFIG_CMD_SF
Walter Schweizerd2ac3262016-10-06 23:29:56 +020041#define CONFIG_ENV_SPI_BUS 0
42#define CONFIG_ENV_SPI_CS 0
43#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
44#endif
45
46/*
47 * max 4k env size is enough, but in case of nand
48 * it has to be rounded to sector size
49 */
50#define CONFIG_ENV_SIZE 0x10000
51#define CONFIG_ENV_ADDR 0x3d0000
52#define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */
53
54/*
55 * Default environment variables
56 */
57#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
58 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
59 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
60 "bootm 0x6400000;"
61
62#define CONFIG_EXTRA_ENV_SETTINGS \
63 "x_bootcmd_ethernet=ping 192.168.1.2\0" \
64 "x_bootcmd_usb=usb start\0" \
65 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
66 "x_bootargs=console=ttyS0,115200\0" \
67 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
68 "ipaddr=192.168.1.5\0"
69
70/*
71 * Ethernet Driver configuration
72 */
73#ifdef CONFIG_CMD_NET
74#define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */
75#define CONFIG_PHY_BASE_ADR 8
76#endif /* CONFIG_CMD_NET */
77
78/*
79 * SATA Driver configuration
80 */
81#ifdef CONFIG_MVSATA_IDE
82#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
83#endif /*CONFIG_MVSATA_IDE*/
84
85#endif /* _CONFIG_DS109_H */