Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright 2018-2019 NXP |
| 4 | * |
| 5 | * Peng Fan <peng.fan@nxp.com> |
| 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <asm/arch/clock.h> |
| 10 | #include <asm/arch/imx-regs.h> |
| 11 | #include <asm/arch/sys_proto.h> |
| 12 | #include <asm/io.h> |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 13 | #include <div64.h> |
| 14 | #include <errno.h> |
| 15 | |
| 16 | DECLARE_GLOBAL_DATA_PTR; |
| 17 | |
| 18 | static struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR; |
| 19 | |
| 20 | void enable_ocotp_clk(unsigned char enable) |
| 21 | { |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 22 | clock_enable(CCGR_OCOTP, !!enable); |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 23 | } |
| 24 | |
| 25 | int enable_i2c_clk(unsigned char enable, unsigned i2c_num) |
| 26 | { |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 27 | /* 0 - 3 is valid i2c num */ |
| 28 | if (i2c_num > 3) |
| 29 | return -EINVAL; |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 30 | |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 31 | clock_enable(CCGR_I2C1 + i2c_num, !!enable); |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 32 | |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 33 | return 0; |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 34 | } |
| 35 | |
| 36 | #ifdef CONFIG_SPL_BUILD |
| 37 | static struct imx_int_pll_rate_table imx8mm_fracpll_tbl[] = { |
Peng Fan | d29bf22 | 2019-12-27 11:40:55 +0800 | [diff] [blame] | 38 | PLL_1443X_RATE(1000000000U, 250, 3, 1, 0), |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 39 | PLL_1443X_RATE(800000000U, 300, 9, 0, 0), |
| 40 | PLL_1443X_RATE(750000000U, 250, 8, 0, 0), |
| 41 | PLL_1443X_RATE(650000000U, 325, 3, 2, 0), |
| 42 | PLL_1443X_RATE(600000000U, 300, 3, 2, 0), |
| 43 | PLL_1443X_RATE(594000000U, 99, 1, 2, 0), |
| 44 | PLL_1443X_RATE(400000000U, 300, 9, 1, 0), |
| 45 | PLL_1443X_RATE(266666667U, 400, 9, 2, 0), |
| 46 | PLL_1443X_RATE(167000000U, 334, 3, 4, 0), |
| 47 | PLL_1443X_RATE(100000000U, 300, 9, 3, 0), |
| 48 | }; |
| 49 | |
Alifer Moraes | 3993110 | 2020-01-14 15:54:59 -0300 | [diff] [blame] | 50 | static int fracpll_configure(enum pll_clocks pll, u32 freq) |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 51 | { |
| 52 | int i; |
| 53 | u32 tmp, div_val; |
| 54 | void *pll_base; |
| 55 | struct imx_int_pll_rate_table *rate; |
| 56 | |
| 57 | for (i = 0; i < ARRAY_SIZE(imx8mm_fracpll_tbl); i++) { |
| 58 | if (freq == imx8mm_fracpll_tbl[i].rate) |
| 59 | break; |
| 60 | } |
| 61 | |
| 62 | if (i == ARRAY_SIZE(imx8mm_fracpll_tbl)) { |
| 63 | printf("No matched freq table %u\n", freq); |
| 64 | return -EINVAL; |
| 65 | } |
| 66 | |
| 67 | rate = &imx8mm_fracpll_tbl[i]; |
| 68 | |
| 69 | switch (pll) { |
| 70 | case ANATOP_DRAM_PLL: |
| 71 | setbits_le32(GPC_BASE_ADDR + 0xEC, 1 << 7); |
| 72 | setbits_le32(GPC_BASE_ADDR + 0xF8, 1 << 5); |
| 73 | writel(SRC_DDR1_ENABLE_MASK, SRC_BASE_ADDR + 0x1004); |
| 74 | |
| 75 | pll_base = &ana_pll->dram_pll_gnrl_ctl; |
| 76 | break; |
| 77 | case ANATOP_VIDEO_PLL: |
| 78 | pll_base = &ana_pll->video_pll1_gnrl_ctl; |
| 79 | break; |
| 80 | default: |
| 81 | return 0; |
| 82 | } |
| 83 | /* Bypass clock and set lock to pll output lock */ |
| 84 | tmp = readl(pll_base); |
| 85 | tmp |= BYPASS_MASK; |
| 86 | writel(tmp, pll_base); |
| 87 | |
| 88 | /* Enable RST */ |
| 89 | tmp &= ~RST_MASK; |
| 90 | writel(tmp, pll_base); |
| 91 | |
| 92 | div_val = (rate->mdiv << MDIV_SHIFT) | (rate->pdiv << PDIV_SHIFT) | |
| 93 | (rate->sdiv << SDIV_SHIFT); |
| 94 | writel(div_val, pll_base + 4); |
| 95 | writel(rate->kdiv << KDIV_SHIFT, pll_base + 8); |
| 96 | |
| 97 | __udelay(100); |
| 98 | |
| 99 | /* Disable RST */ |
| 100 | tmp |= RST_MASK; |
| 101 | writel(tmp, pll_base); |
| 102 | |
| 103 | /* Wait Lock*/ |
| 104 | while (!(readl(pll_base) & LOCK_STATUS)) |
| 105 | ; |
| 106 | |
| 107 | /* Bypass */ |
| 108 | tmp &= ~BYPASS_MASK; |
| 109 | writel(tmp, pll_base); |
| 110 | |
| 111 | return 0; |
| 112 | } |
| 113 | |
| 114 | void dram_pll_init(ulong pll_val) |
| 115 | { |
| 116 | fracpll_configure(ANATOP_DRAM_PLL, pll_val); |
| 117 | } |
| 118 | |
| 119 | static struct dram_bypass_clk_setting imx8mm_dram_bypass_tbl[] = { |
| 120 | DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2, |
| 121 | CLK_ROOT_PRE_DIV2), |
| 122 | DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2, |
| 123 | CLK_ROOT_PRE_DIV2), |
| 124 | DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3, |
| 125 | CLK_ROOT_PRE_DIV2), |
| 126 | }; |
| 127 | |
| 128 | void dram_enable_bypass(ulong clk_val) |
| 129 | { |
| 130 | int i; |
| 131 | struct dram_bypass_clk_setting *config; |
| 132 | |
| 133 | for (i = 0; i < ARRAY_SIZE(imx8mm_dram_bypass_tbl); i++) { |
| 134 | if (clk_val == imx8mm_dram_bypass_tbl[i].clk) |
| 135 | break; |
| 136 | } |
| 137 | |
| 138 | if (i == ARRAY_SIZE(imx8mm_dram_bypass_tbl)) { |
| 139 | printf("No matched freq table %lu\n", clk_val); |
| 140 | return; |
| 141 | } |
| 142 | |
| 143 | config = &imx8mm_dram_bypass_tbl[i]; |
| 144 | |
| 145 | clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON | |
| 146 | CLK_ROOT_SOURCE_SEL(config->alt_root_sel) | |
| 147 | CLK_ROOT_PRE_DIV(config->alt_pre_div)); |
| 148 | clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | |
| 149 | CLK_ROOT_SOURCE_SEL(config->apb_root_sel) | |
| 150 | CLK_ROOT_PRE_DIV(config->apb_pre_div)); |
| 151 | clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON | |
| 152 | CLK_ROOT_SOURCE_SEL(1)); |
| 153 | } |
| 154 | |
| 155 | void dram_disable_bypass(void) |
| 156 | { |
| 157 | clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON | |
| 158 | CLK_ROOT_SOURCE_SEL(0)); |
| 159 | clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | |
| 160 | CLK_ROOT_SOURCE_SEL(4) | |
| 161 | CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5)); |
| 162 | } |
| 163 | #endif |
| 164 | |
| 165 | void init_uart_clk(u32 index) |
| 166 | { |
| 167 | /* |
| 168 | * set uart clock root |
| 169 | * 24M OSC |
| 170 | */ |
| 171 | switch (index) { |
| 172 | case 0: |
| 173 | clock_enable(CCGR_UART1, 0); |
| 174 | clock_set_target_val(UART1_CLK_ROOT, CLK_ROOT_ON | |
| 175 | CLK_ROOT_SOURCE_SEL(0)); |
| 176 | clock_enable(CCGR_UART1, 1); |
| 177 | return; |
| 178 | case 1: |
| 179 | clock_enable(CCGR_UART2, 0); |
| 180 | clock_set_target_val(UART2_CLK_ROOT, CLK_ROOT_ON | |
| 181 | CLK_ROOT_SOURCE_SEL(0)); |
| 182 | clock_enable(CCGR_UART2, 1); |
| 183 | return; |
| 184 | case 2: |
| 185 | clock_enable(CCGR_UART3, 0); |
| 186 | clock_set_target_val(UART3_CLK_ROOT, CLK_ROOT_ON | |
| 187 | CLK_ROOT_SOURCE_SEL(0)); |
| 188 | clock_enable(CCGR_UART3, 1); |
| 189 | return; |
| 190 | case 3: |
| 191 | clock_enable(CCGR_UART4, 0); |
| 192 | clock_set_target_val(UART4_CLK_ROOT, CLK_ROOT_ON | |
| 193 | CLK_ROOT_SOURCE_SEL(0)); |
| 194 | clock_enable(CCGR_UART4, 1); |
| 195 | return; |
| 196 | default: |
| 197 | printf("Invalid uart index\n"); |
| 198 | return; |
| 199 | } |
| 200 | } |
| 201 | |
| 202 | void init_wdog_clk(void) |
| 203 | { |
| 204 | clock_enable(CCGR_WDOG1, 0); |
| 205 | clock_enable(CCGR_WDOG2, 0); |
| 206 | clock_enable(CCGR_WDOG3, 0); |
| 207 | clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON | |
| 208 | CLK_ROOT_SOURCE_SEL(0)); |
| 209 | clock_enable(CCGR_WDOG1, 1); |
| 210 | clock_enable(CCGR_WDOG2, 1); |
| 211 | clock_enable(CCGR_WDOG3, 1); |
| 212 | } |
| 213 | |
| 214 | int clock_init(void) |
| 215 | { |
| 216 | u32 val_cfg0; |
| 217 | |
| 218 | /* |
| 219 | * The gate is not exported to clk tree, so configure them here. |
| 220 | * According to ANAMIX SPEC |
| 221 | * sys pll1 fixed at 800MHz |
| 222 | * sys pll2 fixed at 1GHz |
| 223 | * Here we only enable the outputs. |
| 224 | */ |
| 225 | val_cfg0 = readl(&ana_pll->sys_pll1_gnrl_ctl); |
| 226 | val_cfg0 |= INTPLL_CLKE_MASK | INTPLL_DIV2_CLKE_MASK | |
| 227 | INTPLL_DIV3_CLKE_MASK | INTPLL_DIV4_CLKE_MASK | |
| 228 | INTPLL_DIV5_CLKE_MASK | INTPLL_DIV6_CLKE_MASK | |
| 229 | INTPLL_DIV8_CLKE_MASK | INTPLL_DIV10_CLKE_MASK | |
| 230 | INTPLL_DIV20_CLKE_MASK; |
| 231 | writel(val_cfg0, &ana_pll->sys_pll1_gnrl_ctl); |
| 232 | |
| 233 | val_cfg0 = readl(&ana_pll->sys_pll2_gnrl_ctl); |
| 234 | val_cfg0 |= INTPLL_CLKE_MASK | INTPLL_DIV2_CLKE_MASK | |
| 235 | INTPLL_DIV3_CLKE_MASK | INTPLL_DIV4_CLKE_MASK | |
| 236 | INTPLL_DIV5_CLKE_MASK | INTPLL_DIV6_CLKE_MASK | |
| 237 | INTPLL_DIV8_CLKE_MASK | INTPLL_DIV10_CLKE_MASK | |
| 238 | INTPLL_DIV20_CLKE_MASK; |
| 239 | writel(val_cfg0, &ana_pll->sys_pll2_gnrl_ctl); |
| 240 | |
| 241 | /* config GIC to sys_pll2_100m */ |
| 242 | clock_enable(CCGR_GIC, 0); |
| 243 | clock_set_target_val(GIC_CLK_ROOT, CLK_ROOT_ON | |
| 244 | CLK_ROOT_SOURCE_SEL(3)); |
| 245 | clock_enable(CCGR_GIC, 1); |
| 246 | |
| 247 | clock_set_target_val(NAND_USDHC_BUS_CLK_ROOT, CLK_ROOT_ON | |
| 248 | CLK_ROOT_SOURCE_SEL(1)); |
| 249 | |
| 250 | clock_enable(CCGR_DDR1, 0); |
| 251 | clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON | |
| 252 | CLK_ROOT_SOURCE_SEL(1)); |
| 253 | clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | |
| 254 | CLK_ROOT_SOURCE_SEL(1)); |
| 255 | clock_enable(CCGR_DDR1, 1); |
| 256 | |
| 257 | init_wdog_clk(); |
| 258 | |
| 259 | clock_enable(CCGR_TEMP_SENSOR, 1); |
| 260 | |
| 261 | clock_enable(CCGR_SEC_DEBUG, 1); |
| 262 | |
| 263 | return 0; |
| 264 | }; |
| 265 | |
| 266 | u32 imx_get_uartclk(void) |
| 267 | { |
| 268 | return 24000000U; |
| 269 | } |
| 270 | |
Alifer Moraes | 3993110 | 2020-01-14 15:54:59 -0300 | [diff] [blame] | 271 | static u32 decode_intpll(enum clk_root_src intpll) |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 272 | { |
| 273 | u32 pll_gnrl_ctl, pll_div_ctl, pll_clke_mask; |
| 274 | u32 main_div, pre_div, post_div, div; |
| 275 | u64 freq; |
| 276 | |
| 277 | switch (intpll) { |
| 278 | case ARM_PLL_CLK: |
| 279 | pll_gnrl_ctl = readl(&ana_pll->arm_pll_gnrl_ctl); |
| 280 | pll_div_ctl = readl(&ana_pll->arm_pll_div_ctl); |
| 281 | break; |
| 282 | case GPU_PLL_CLK: |
| 283 | pll_gnrl_ctl = readl(&ana_pll->gpu_pll_gnrl_ctl); |
| 284 | pll_div_ctl = readl(&ana_pll->gpu_pll_div_ctl); |
| 285 | break; |
| 286 | case VPU_PLL_CLK: |
| 287 | pll_gnrl_ctl = readl(&ana_pll->vpu_pll_gnrl_ctl); |
| 288 | pll_div_ctl = readl(&ana_pll->vpu_pll_div_ctl); |
| 289 | break; |
| 290 | case SYSTEM_PLL1_800M_CLK: |
| 291 | case SYSTEM_PLL1_400M_CLK: |
| 292 | case SYSTEM_PLL1_266M_CLK: |
| 293 | case SYSTEM_PLL1_200M_CLK: |
| 294 | case SYSTEM_PLL1_160M_CLK: |
| 295 | case SYSTEM_PLL1_133M_CLK: |
| 296 | case SYSTEM_PLL1_100M_CLK: |
| 297 | case SYSTEM_PLL1_80M_CLK: |
| 298 | case SYSTEM_PLL1_40M_CLK: |
| 299 | pll_gnrl_ctl = readl(&ana_pll->sys_pll1_gnrl_ctl); |
| 300 | pll_div_ctl = readl(&ana_pll->sys_pll1_div_ctl); |
| 301 | break; |
| 302 | case SYSTEM_PLL2_1000M_CLK: |
| 303 | case SYSTEM_PLL2_500M_CLK: |
| 304 | case SYSTEM_PLL2_333M_CLK: |
| 305 | case SYSTEM_PLL2_250M_CLK: |
| 306 | case SYSTEM_PLL2_200M_CLK: |
| 307 | case SYSTEM_PLL2_166M_CLK: |
| 308 | case SYSTEM_PLL2_125M_CLK: |
| 309 | case SYSTEM_PLL2_100M_CLK: |
| 310 | case SYSTEM_PLL2_50M_CLK: |
| 311 | pll_gnrl_ctl = readl(&ana_pll->sys_pll2_gnrl_ctl); |
| 312 | pll_div_ctl = readl(&ana_pll->sys_pll2_div_ctl); |
| 313 | break; |
| 314 | case SYSTEM_PLL3_CLK: |
| 315 | pll_gnrl_ctl = readl(&ana_pll->sys_pll3_gnrl_ctl); |
| 316 | pll_div_ctl = readl(&ana_pll->sys_pll3_div_ctl); |
| 317 | break; |
| 318 | default: |
| 319 | return -EINVAL; |
| 320 | } |
| 321 | |
| 322 | /* Only support SYS_XTAL 24M, PAD_CLK not take into consideration */ |
| 323 | if ((pll_gnrl_ctl & INTPLL_REF_CLK_SEL_MASK) != 0) |
| 324 | return 0; |
| 325 | |
| 326 | if ((pll_gnrl_ctl & INTPLL_RST_MASK) == 0) |
| 327 | return 0; |
| 328 | |
| 329 | /* |
| 330 | * When BYPASS is equal to 1, PLL enters the bypass mode |
| 331 | * regardless of the values of RESETB |
| 332 | */ |
| 333 | if (pll_gnrl_ctl & INTPLL_BYPASS_MASK) |
| 334 | return 24000000u; |
| 335 | |
| 336 | if (!(pll_gnrl_ctl & INTPLL_LOCK_MASK)) { |
| 337 | puts("pll not locked\n"); |
| 338 | return 0; |
| 339 | } |
| 340 | |
| 341 | switch (intpll) { |
| 342 | case ARM_PLL_CLK: |
| 343 | case GPU_PLL_CLK: |
| 344 | case VPU_PLL_CLK: |
| 345 | case SYSTEM_PLL3_CLK: |
| 346 | case SYSTEM_PLL1_800M_CLK: |
| 347 | case SYSTEM_PLL2_1000M_CLK: |
| 348 | pll_clke_mask = INTPLL_CLKE_MASK; |
| 349 | div = 1; |
| 350 | break; |
| 351 | |
| 352 | case SYSTEM_PLL1_400M_CLK: |
| 353 | case SYSTEM_PLL2_500M_CLK: |
| 354 | pll_clke_mask = INTPLL_DIV2_CLKE_MASK; |
| 355 | div = 2; |
| 356 | break; |
| 357 | |
| 358 | case SYSTEM_PLL1_266M_CLK: |
| 359 | case SYSTEM_PLL2_333M_CLK: |
| 360 | pll_clke_mask = INTPLL_DIV3_CLKE_MASK; |
| 361 | div = 3; |
| 362 | break; |
| 363 | |
| 364 | case SYSTEM_PLL1_200M_CLK: |
| 365 | case SYSTEM_PLL2_250M_CLK: |
| 366 | pll_clke_mask = INTPLL_DIV4_CLKE_MASK; |
| 367 | div = 4; |
| 368 | break; |
| 369 | |
| 370 | case SYSTEM_PLL1_160M_CLK: |
| 371 | case SYSTEM_PLL2_200M_CLK: |
| 372 | pll_clke_mask = INTPLL_DIV5_CLKE_MASK; |
| 373 | div = 5; |
| 374 | break; |
| 375 | |
| 376 | case SYSTEM_PLL1_133M_CLK: |
| 377 | case SYSTEM_PLL2_166M_CLK: |
| 378 | pll_clke_mask = INTPLL_DIV6_CLKE_MASK; |
| 379 | div = 6; |
| 380 | break; |
| 381 | |
| 382 | case SYSTEM_PLL1_100M_CLK: |
| 383 | case SYSTEM_PLL2_125M_CLK: |
| 384 | pll_clke_mask = INTPLL_DIV8_CLKE_MASK; |
| 385 | div = 8; |
| 386 | break; |
| 387 | |
| 388 | case SYSTEM_PLL1_80M_CLK: |
| 389 | case SYSTEM_PLL2_100M_CLK: |
| 390 | pll_clke_mask = INTPLL_DIV10_CLKE_MASK; |
| 391 | div = 10; |
| 392 | break; |
| 393 | |
| 394 | case SYSTEM_PLL1_40M_CLK: |
| 395 | case SYSTEM_PLL2_50M_CLK: |
| 396 | pll_clke_mask = INTPLL_DIV20_CLKE_MASK; |
| 397 | div = 20; |
| 398 | break; |
| 399 | default: |
| 400 | return -EINVAL; |
| 401 | } |
| 402 | |
| 403 | if ((pll_gnrl_ctl & pll_clke_mask) == 0) |
| 404 | return 0; |
| 405 | |
| 406 | main_div = (pll_div_ctl & INTPLL_MAIN_DIV_MASK) >> |
| 407 | INTPLL_MAIN_DIV_SHIFT; |
| 408 | pre_div = (pll_div_ctl & INTPLL_PRE_DIV_MASK) >> |
| 409 | INTPLL_PRE_DIV_SHIFT; |
| 410 | post_div = (pll_div_ctl & INTPLL_POST_DIV_MASK) >> |
| 411 | INTPLL_POST_DIV_SHIFT; |
| 412 | |
| 413 | /* FFVCO = (m * FFIN) / p, FFOUT = (m * FFIN) / (p * 2^s) */ |
| 414 | freq = 24000000ULL * main_div; |
| 415 | return lldiv(freq, pre_div * (1 << post_div) * div); |
| 416 | } |
| 417 | |
Alifer Moraes | 3993110 | 2020-01-14 15:54:59 -0300 | [diff] [blame] | 418 | static u32 decode_fracpll(enum clk_root_src frac_pll) |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 419 | { |
| 420 | u32 pll_gnrl_ctl, pll_fdiv_ctl0, pll_fdiv_ctl1; |
| 421 | u32 main_div, pre_div, post_div, k; |
| 422 | |
| 423 | switch (frac_pll) { |
| 424 | case DRAM_PLL1_CLK: |
| 425 | pll_gnrl_ctl = readl(&ana_pll->dram_pll_gnrl_ctl); |
| 426 | pll_fdiv_ctl0 = readl(&ana_pll->dram_pll_fdiv_ctl0); |
| 427 | pll_fdiv_ctl1 = readl(&ana_pll->dram_pll_fdiv_ctl1); |
| 428 | break; |
| 429 | case AUDIO_PLL1_CLK: |
| 430 | pll_gnrl_ctl = readl(&ana_pll->audio_pll1_gnrl_ctl); |
| 431 | pll_fdiv_ctl0 = readl(&ana_pll->audio_pll1_fdiv_ctl0); |
| 432 | pll_fdiv_ctl1 = readl(&ana_pll->audio_pll1_fdiv_ctl1); |
| 433 | break; |
| 434 | case AUDIO_PLL2_CLK: |
| 435 | pll_gnrl_ctl = readl(&ana_pll->audio_pll2_gnrl_ctl); |
| 436 | pll_fdiv_ctl0 = readl(&ana_pll->audio_pll2_fdiv_ctl0); |
| 437 | pll_fdiv_ctl1 = readl(&ana_pll->audio_pll2_fdiv_ctl1); |
| 438 | break; |
| 439 | case VIDEO_PLL_CLK: |
| 440 | pll_gnrl_ctl = readl(&ana_pll->video_pll1_gnrl_ctl); |
| 441 | pll_fdiv_ctl0 = readl(&ana_pll->video_pll1_fdiv_ctl0); |
| 442 | pll_fdiv_ctl1 = readl(&ana_pll->video_pll1_fdiv_ctl1); |
| 443 | break; |
| 444 | default: |
| 445 | printf("Not supported\n"); |
| 446 | return 0; |
| 447 | } |
| 448 | |
| 449 | /* Only support SYS_XTAL 24M, PAD_CLK not take into consideration */ |
| 450 | if ((pll_gnrl_ctl & INTPLL_REF_CLK_SEL_MASK) != 0) |
| 451 | return 0; |
| 452 | |
| 453 | if ((pll_gnrl_ctl & INTPLL_RST_MASK) == 0) |
| 454 | return 0; |
| 455 | /* |
| 456 | * When BYPASS is equal to 1, PLL enters the bypass mode |
| 457 | * regardless of the values of RESETB |
| 458 | */ |
| 459 | if (pll_gnrl_ctl & INTPLL_BYPASS_MASK) |
| 460 | return 24000000u; |
| 461 | |
| 462 | if (!(pll_gnrl_ctl & INTPLL_LOCK_MASK)) { |
| 463 | puts("pll not locked\n"); |
| 464 | return 0; |
| 465 | } |
| 466 | |
| 467 | if (!(pll_gnrl_ctl & INTPLL_CLKE_MASK)) |
| 468 | return 0; |
| 469 | |
| 470 | main_div = (pll_fdiv_ctl0 & INTPLL_MAIN_DIV_MASK) >> |
| 471 | INTPLL_MAIN_DIV_SHIFT; |
| 472 | pre_div = (pll_fdiv_ctl0 & INTPLL_PRE_DIV_MASK) >> |
| 473 | INTPLL_PRE_DIV_SHIFT; |
| 474 | post_div = (pll_fdiv_ctl0 & INTPLL_POST_DIV_MASK) >> |
| 475 | INTPLL_POST_DIV_SHIFT; |
| 476 | |
| 477 | k = pll_fdiv_ctl1 & GENMASK(15, 0); |
| 478 | |
| 479 | return lldiv((main_div * 65536 + k) * 24000000ULL, |
| 480 | 65536 * pre_div * (1 << post_div)); |
| 481 | } |
| 482 | |
Alifer Moraes | 3993110 | 2020-01-14 15:54:59 -0300 | [diff] [blame] | 483 | static u32 get_root_src_clk(enum clk_root_src root_src) |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 484 | { |
| 485 | switch (root_src) { |
| 486 | case OSC_24M_CLK: |
| 487 | return 24000000u; |
| 488 | case OSC_HDMI_CLK: |
| 489 | return 26000000u; |
| 490 | case OSC_32K_CLK: |
| 491 | return 32000u; |
| 492 | case ARM_PLL_CLK: |
| 493 | case GPU_PLL_CLK: |
| 494 | case VPU_PLL_CLK: |
| 495 | case SYSTEM_PLL1_800M_CLK: |
| 496 | case SYSTEM_PLL1_400M_CLK: |
| 497 | case SYSTEM_PLL1_266M_CLK: |
| 498 | case SYSTEM_PLL1_200M_CLK: |
| 499 | case SYSTEM_PLL1_160M_CLK: |
| 500 | case SYSTEM_PLL1_133M_CLK: |
| 501 | case SYSTEM_PLL1_100M_CLK: |
| 502 | case SYSTEM_PLL1_80M_CLK: |
| 503 | case SYSTEM_PLL1_40M_CLK: |
| 504 | case SYSTEM_PLL2_1000M_CLK: |
| 505 | case SYSTEM_PLL2_500M_CLK: |
| 506 | case SYSTEM_PLL2_333M_CLK: |
| 507 | case SYSTEM_PLL2_250M_CLK: |
| 508 | case SYSTEM_PLL2_200M_CLK: |
| 509 | case SYSTEM_PLL2_166M_CLK: |
| 510 | case SYSTEM_PLL2_125M_CLK: |
| 511 | case SYSTEM_PLL2_100M_CLK: |
| 512 | case SYSTEM_PLL2_50M_CLK: |
| 513 | case SYSTEM_PLL3_CLK: |
| 514 | return decode_intpll(root_src); |
| 515 | case DRAM_PLL1_CLK: |
| 516 | case AUDIO_PLL1_CLK: |
| 517 | case AUDIO_PLL2_CLK: |
| 518 | case VIDEO_PLL_CLK: |
| 519 | return decode_fracpll(root_src); |
| 520 | default: |
| 521 | return 0; |
| 522 | } |
| 523 | |
| 524 | return 0; |
| 525 | } |
| 526 | |
Alifer Moraes | 3993110 | 2020-01-14 15:54:59 -0300 | [diff] [blame] | 527 | static u32 get_root_clk(enum clk_root_index clock_id) |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 528 | { |
| 529 | enum clk_root_src root_src; |
| 530 | u32 post_podf, pre_podf, root_src_clk; |
| 531 | |
| 532 | if (clock_root_enabled(clock_id) <= 0) |
| 533 | return 0; |
| 534 | |
| 535 | if (clock_get_prediv(clock_id, &pre_podf) < 0) |
| 536 | return 0; |
| 537 | |
| 538 | if (clock_get_postdiv(clock_id, &post_podf) < 0) |
| 539 | return 0; |
| 540 | |
| 541 | if (clock_get_src(clock_id, &root_src) < 0) |
| 542 | return 0; |
| 543 | |
| 544 | root_src_clk = get_root_src_clk(root_src); |
| 545 | |
| 546 | return root_src_clk / (post_podf + 1) / (pre_podf + 1); |
| 547 | } |
| 548 | |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 549 | u32 mxc_get_clock(enum mxc_clock clk) |
| 550 | { |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 551 | u32 val; |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 552 | |
| 553 | switch (clk) { |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 554 | case MXC_ARM_CLK: |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 555 | return get_root_clk(ARM_A53_CLK_ROOT); |
| 556 | case MXC_IPG_CLK: |
| 557 | clock_get_target_val(IPG_CLK_ROOT, &val); |
| 558 | val = val & 0x3; |
| 559 | return get_root_clk(AHB_CLK_ROOT) / 2 / (val + 1); |
| 560 | case MXC_CSPI_CLK: |
| 561 | return get_root_clk(ECSPI1_CLK_ROOT); |
| 562 | case MXC_ESDHC_CLK: |
| 563 | return get_root_clk(USDHC1_CLK_ROOT); |
| 564 | case MXC_ESDHC2_CLK: |
| 565 | return get_root_clk(USDHC2_CLK_ROOT); |
| 566 | case MXC_ESDHC3_CLK: |
| 567 | return get_root_clk(USDHC3_CLK_ROOT); |
| 568 | case MXC_I2C_CLK: |
| 569 | return get_root_clk(I2C1_CLK_ROOT); |
| 570 | case MXC_UART_CLK: |
| 571 | return get_root_clk(UART1_CLK_ROOT); |
| 572 | case MXC_QSPI_CLK: |
| 573 | return get_root_clk(QSPI_CLK_ROOT); |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 574 | default: |
Peng Fan | 60c29bb | 2019-12-30 16:52:30 +0800 | [diff] [blame] | 575 | printf("Unsupported mxc_clock %d\n", clk); |
| 576 | break; |
Peng Fan | 9987846 | 2019-08-27 06:25:51 +0000 | [diff] [blame] | 577 | } |
| 578 | |
| 579 | return 0; |
| 580 | } |