| Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
| Albert ARIBAUD | bd6e56f | 2014-11-13 17:59:15 +0100 | [diff] [blame] | 2 | /* |
| 3 | * relocate - i.MX27-specific vector relocation |
| 4 | * |
| 5 | * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net> |
| Albert ARIBAUD | bd6e56f | 2014-11-13 17:59:15 +0100 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #include <asm-offsets.h> |
| 9 | #include <config.h> |
| 10 | #include <linux/linkage.h> |
| 11 | |
| 12 | /* |
| 13 | * The i.MX27 SoC is very specific with respect to exceptions: it |
| 14 | * does not provide RAM at the high vectors address (0xFFFF0000), |
| 15 | * thus only the low address (0x00000000) is useable; but that is |
| 16 | * in ROM. Therefore, vectors cannot be changed at all. |
| 17 | * |
| 18 | * However, these ROM-based vectors actually just perform indirect |
| 19 | * calls through pointers located in RAM at SoC-specific addresses, |
| 20 | * as follows: |
| 21 | * |
| 22 | * Offset Exception Use by ROM code |
| 23 | * 0x00000000 reset indirect branch to [0x00000014] |
| 24 | * 0x00000004 undefined instruction indirect branch to [0xfffffef0] |
| 25 | * 0x00000008 software interrupt indirect branch to [0xfffffef4] |
| 26 | * 0x0000000c prefetch abort indirect branch to [0xfffffef8] |
| 27 | * 0x00000010 data abort indirect branch to [0xfffffefc] |
| 28 | * 0x00000014 (reserved in ARMv5) vector to ROM reset: 0xc0000000 |
| 29 | * 0x00000018 IRQ indirect branch to [0xffffff00] |
| 30 | * 0x0000001c FIQ indirect branch to [0xffffff04] |
| 31 | * |
| 32 | * In order to initialize exceptions on i.MX27, we must copy U-Boot's |
| 33 | * indirect (not exception!) vector table into 0xfffffef0..0xffffff04 |
| 34 | * taking care not to copy vectors number 5 (reserved exception). |
| 35 | */ |
| 36 | |
| 37 | .section .text.relocate_vectors,"ax",%progbits |
| 38 | |
| 39 | ENTRY(relocate_vectors) |
| 40 | |
| 41 | ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */ |
| 42 | ldr r1, =32 /* size of vector table */ |
| 43 | add r0, r0, r1 /* skip to indirect table */ |
| 44 | ldr r1, =0xFFFFFEF0 /* i.MX27 indirect table */ |
| 45 | ldmia r0!, {r2-r8} /* load indirect vectors 1..7 */ |
| 46 | stmia r1!, {r2-r5, r7,r8} /* write all but vector 5 */ |
| 47 | |
| 48 | bx lr |
| 49 | |
| 50 | ENDPROC(relocate_vectors) |