Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. |
| 4 | * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | #include <dt-bindings/input/linux-event-codes.h> |
| 9 | #include <dt-bindings/pwm/pwm.h> |
| 10 | #include "rk3399.dtsi" |
| 11 | #include "rk3399-opp.dtsi" |
| 12 | |
| 13 | / { |
| 14 | model = "Pine64 RockPro64"; |
| 15 | compatible = "pine64,rockpro64", "rockchip,rk3399"; |
| 16 | |
| 17 | chosen { |
| 18 | stdout-path = "serial2:1500000n8"; |
| 19 | }; |
| 20 | |
| 21 | clkin_gmac: external-gmac-clock { |
| 22 | compatible = "fixed-clock"; |
| 23 | clock-frequency = <125000000>; |
| 24 | clock-output-names = "clkin_gmac"; |
| 25 | #clock-cells = <0>; |
| 26 | }; |
| 27 | |
| 28 | gpio-keys { |
| 29 | compatible = "gpio-keys"; |
| 30 | autorepeat; |
| 31 | pinctrl-names = "default"; |
| 32 | pinctrl-0 = <&pwrbtn>; |
| 33 | |
| 34 | power { |
| 35 | debounce-interval = <100>; |
| 36 | gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
| 37 | label = "GPIO Key Power"; |
| 38 | linux,code = <KEY_POWER>; |
| 39 | wakeup-source; |
| 40 | }; |
| 41 | }; |
| 42 | |
| 43 | leds { |
| 44 | compatible = "gpio-leds"; |
| 45 | pinctrl-names = "default"; |
| 46 | pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; |
| 47 | |
| 48 | work-led { |
| 49 | label = "work"; |
| 50 | default-state = "on"; |
| 51 | gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; |
| 52 | }; |
| 53 | |
| 54 | diy-led { |
| 55 | label = "diy"; |
| 56 | default-state = "off"; |
| 57 | gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; |
| 58 | }; |
| 59 | }; |
| 60 | |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 61 | fan: pwm-fan { |
| 62 | compatible = "pwm-fan"; |
| 63 | #cooling-cells = <2>; |
| 64 | fan-supply = <&vcc12v_dcin>; |
| 65 | pwms = <&pwm1 0 50000 0>; |
| 66 | }; |
| 67 | |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 68 | sdio_pwrseq: sdio-pwrseq { |
| 69 | compatible = "mmc-pwrseq-simple"; |
| 70 | clocks = <&rk808 1>; |
| 71 | clock-names = "ext_clock"; |
| 72 | pinctrl-names = "default"; |
| 73 | pinctrl-0 = <&wifi_enable_h>; |
| 74 | |
| 75 | /* |
| 76 | * On the module itself this is one of these (depending |
| 77 | * on the actual card populated): |
| 78 | * - SDIO_RESET_L_WL_REG_ON |
| 79 | * - PDN (power down when low) |
| 80 | */ |
| 81 | reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; |
| 82 | }; |
| 83 | |
| 84 | vcc12v_dcin: vcc12v-dcin { |
| 85 | compatible = "regulator-fixed"; |
| 86 | regulator-name = "vcc12v_dcin"; |
| 87 | regulator-always-on; |
| 88 | regulator-boot-on; |
| 89 | regulator-min-microvolt = <12000000>; |
| 90 | regulator-max-microvolt = <12000000>; |
| 91 | }; |
| 92 | |
| 93 | /* switched by pmic_sleep */ |
| 94 | vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { |
| 95 | compatible = "regulator-fixed"; |
| 96 | regulator-name = "vcc1v8_s3"; |
| 97 | regulator-always-on; |
| 98 | regulator-boot-on; |
| 99 | regulator-min-microvolt = <1800000>; |
| 100 | regulator-max-microvolt = <1800000>; |
| 101 | vin-supply = <&vcc_1v8>; |
| 102 | }; |
| 103 | |
| 104 | vcc3v3_pcie: vcc3v3-pcie-regulator { |
| 105 | compatible = "regulator-fixed"; |
| 106 | enable-active-high; |
| 107 | gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; |
| 108 | pinctrl-names = "default"; |
| 109 | pinctrl-0 = <&pcie_pwr_en>; |
| 110 | regulator-name = "vcc3v3_pcie"; |
| 111 | regulator-always-on; |
| 112 | regulator-boot-on; |
| 113 | vin-supply = <&vcc12v_dcin>; |
| 114 | }; |
| 115 | |
| 116 | vcc3v3_sys: vcc3v3-sys { |
| 117 | compatible = "regulator-fixed"; |
| 118 | regulator-name = "vcc3v3_sys"; |
| 119 | regulator-always-on; |
| 120 | regulator-boot-on; |
| 121 | regulator-min-microvolt = <3300000>; |
| 122 | regulator-max-microvolt = <3300000>; |
| 123 | vin-supply = <&vcc5v0_sys>; |
| 124 | }; |
| 125 | |
| 126 | /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ |
| 127 | vcc5v0_host: vcc5v0-host-regulator { |
| 128 | compatible = "regulator-fixed"; |
| 129 | enable-active-high; |
| 130 | gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; |
| 131 | pinctrl-names = "default"; |
| 132 | pinctrl-0 = <&vcc5v0_host_en>; |
| 133 | regulator-name = "vcc5v0_host"; |
| 134 | regulator-always-on; |
| 135 | vin-supply = <&vcc5v0_usb>; |
| 136 | }; |
| 137 | |
| 138 | vcc5v0_typec: vcc5v0-typec-regulator { |
| 139 | compatible = "regulator-fixed"; |
| 140 | enable-active-high; |
| 141 | gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 142 | pinctrl-names = "default"; |
| 143 | pinctrl-0 = <&vcc5v0_typec_en>; |
| 144 | regulator-name = "vcc5v0_typec"; |
| 145 | regulator-always-on; |
| 146 | vin-supply = <&vcc5v0_usb>; |
| 147 | }; |
| 148 | |
| 149 | vcc5v0_sys: vcc5v0-sys { |
| 150 | compatible = "regulator-fixed"; |
| 151 | regulator-name = "vcc5v0_sys"; |
| 152 | regulator-always-on; |
| 153 | regulator-boot-on; |
| 154 | regulator-min-microvolt = <5000000>; |
| 155 | regulator-max-microvolt = <5000000>; |
| 156 | vin-supply = <&vcc12v_dcin>; |
| 157 | }; |
| 158 | |
| 159 | vcc5v0_usb: vcc5v0-usb { |
| 160 | compatible = "regulator-fixed"; |
| 161 | regulator-name = "vcc5v0_usb"; |
| 162 | regulator-always-on; |
| 163 | regulator-boot-on; |
| 164 | regulator-min-microvolt = <5000000>; |
| 165 | regulator-max-microvolt = <5000000>; |
| 166 | vin-supply = <&vcc12v_dcin>; |
| 167 | }; |
| 168 | |
| 169 | vdd_log: vdd-log { |
| 170 | compatible = "pwm-regulator"; |
| 171 | pwms = <&pwm2 0 25000 1>; |
| 172 | regulator-name = "vdd_log"; |
| 173 | regulator-always-on; |
| 174 | regulator-boot-on; |
| 175 | regulator-min-microvolt = <800000>; |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 176 | regulator-max-microvolt = <1700000>; |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 177 | vin-supply = <&vcc5v0_sys>; |
| 178 | }; |
| 179 | }; |
| 180 | |
| 181 | &cpu_l0 { |
| 182 | cpu-supply = <&vdd_cpu_l>; |
| 183 | }; |
| 184 | |
| 185 | &cpu_l1 { |
| 186 | cpu-supply = <&vdd_cpu_l>; |
| 187 | }; |
| 188 | |
| 189 | &cpu_l2 { |
| 190 | cpu-supply = <&vdd_cpu_l>; |
| 191 | }; |
| 192 | |
| 193 | &cpu_l3 { |
| 194 | cpu-supply = <&vdd_cpu_l>; |
| 195 | }; |
| 196 | |
| 197 | &cpu_b0 { |
| 198 | cpu-supply = <&vdd_cpu_b>; |
| 199 | }; |
| 200 | |
| 201 | &cpu_b1 { |
| 202 | cpu-supply = <&vdd_cpu_b>; |
| 203 | }; |
| 204 | |
| 205 | &emmc_phy { |
| 206 | status = "okay"; |
| 207 | }; |
| 208 | |
| 209 | &gmac { |
| 210 | assigned-clocks = <&cru SCLK_RMII_SRC>; |
| 211 | assigned-clock-parents = <&clkin_gmac>; |
| 212 | clock_in_out = "input"; |
| 213 | phy-supply = <&vcc_lan>; |
| 214 | phy-mode = "rgmii"; |
| 215 | pinctrl-names = "default"; |
| 216 | pinctrl-0 = <&rgmii_pins>; |
| 217 | snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; |
| 218 | snps,reset-active-low; |
| 219 | snps,reset-delays-us = <0 10000 50000>; |
| 220 | tx_delay = <0x28>; |
| 221 | rx_delay = <0x11>; |
| 222 | status = "okay"; |
| 223 | }; |
| 224 | |
| 225 | &hdmi { |
| 226 | ddc-i2c-bus = <&i2c3>; |
| 227 | pinctrl-names = "default"; |
| 228 | pinctrl-0 = <&hdmi_cec>; |
| 229 | status = "okay"; |
| 230 | }; |
| 231 | |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 232 | &hdmi_sound { |
| 233 | status = "okay"; |
| 234 | }; |
| 235 | |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 236 | &gpu { |
| 237 | mali-supply = <&vdd_gpu>; |
| 238 | status = "okay"; |
| 239 | }; |
| 240 | |
| 241 | &i2c0 { |
| 242 | clock-frequency = <400000>; |
| 243 | i2c-scl-rising-time-ns = <168>; |
| 244 | i2c-scl-falling-time-ns = <4>; |
| 245 | status = "okay"; |
| 246 | |
| 247 | rk808: pmic@1b { |
| 248 | compatible = "rockchip,rk808"; |
| 249 | reg = <0x1b>; |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 250 | interrupt-parent = <&gpio3>; |
| 251 | interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 252 | #clock-cells = <1>; |
| 253 | clock-output-names = "xin32k", "rk808-clkout2"; |
| 254 | pinctrl-names = "default"; |
| 255 | pinctrl-0 = <&pmic_int_l>; |
| 256 | rockchip,system-power-controller; |
| 257 | wakeup-source; |
| 258 | |
| 259 | vcc1-supply = <&vcc5v0_sys>; |
| 260 | vcc2-supply = <&vcc5v0_sys>; |
| 261 | vcc3-supply = <&vcc5v0_sys>; |
| 262 | vcc4-supply = <&vcc5v0_sys>; |
| 263 | vcc6-supply = <&vcc5v0_sys>; |
| 264 | vcc7-supply = <&vcc5v0_sys>; |
| 265 | vcc8-supply = <&vcc3v3_sys>; |
| 266 | vcc9-supply = <&vcc5v0_sys>; |
| 267 | vcc10-supply = <&vcc5v0_sys>; |
| 268 | vcc11-supply = <&vcc5v0_sys>; |
| 269 | vcc12-supply = <&vcc3v3_sys>; |
| 270 | vddio-supply = <&vcca_1v8>; |
| 271 | |
| 272 | regulators { |
| 273 | vdd_center: DCDC_REG1 { |
| 274 | regulator-name = "vdd_center"; |
| 275 | regulator-always-on; |
| 276 | regulator-boot-on; |
| 277 | regulator-min-microvolt = <750000>; |
| 278 | regulator-max-microvolt = <1350000>; |
| 279 | regulator-ramp-delay = <6001>; |
| 280 | regulator-state-mem { |
| 281 | regulator-off-in-suspend; |
| 282 | }; |
| 283 | }; |
| 284 | |
| 285 | vdd_cpu_l: DCDC_REG2 { |
| 286 | regulator-name = "vdd_cpu_l"; |
| 287 | regulator-always-on; |
| 288 | regulator-boot-on; |
| 289 | regulator-min-microvolt = <750000>; |
| 290 | regulator-max-microvolt = <1350000>; |
| 291 | regulator-ramp-delay = <6001>; |
| 292 | regulator-state-mem { |
| 293 | regulator-off-in-suspend; |
| 294 | }; |
| 295 | }; |
| 296 | |
| 297 | vcc_ddr: DCDC_REG3 { |
| 298 | regulator-name = "vcc_ddr"; |
| 299 | regulator-always-on; |
| 300 | regulator-boot-on; |
| 301 | regulator-state-mem { |
| 302 | regulator-on-in-suspend; |
| 303 | }; |
| 304 | }; |
| 305 | |
| 306 | vcc_1v8: DCDC_REG4 { |
| 307 | regulator-name = "vcc_1v8"; |
| 308 | regulator-always-on; |
| 309 | regulator-boot-on; |
| 310 | regulator-min-microvolt = <1800000>; |
| 311 | regulator-max-microvolt = <1800000>; |
| 312 | regulator-state-mem { |
| 313 | regulator-on-in-suspend; |
| 314 | regulator-suspend-microvolt = <1800000>; |
| 315 | }; |
| 316 | }; |
| 317 | |
| 318 | vcc1v8_dvp: LDO_REG1 { |
| 319 | regulator-name = "vcc1v8_dvp"; |
| 320 | regulator-always-on; |
| 321 | regulator-boot-on; |
| 322 | regulator-min-microvolt = <1800000>; |
| 323 | regulator-max-microvolt = <1800000>; |
| 324 | regulator-state-mem { |
| 325 | regulator-off-in-suspend; |
| 326 | }; |
| 327 | }; |
| 328 | |
| 329 | vcc3v0_touch: LDO_REG2 { |
| 330 | regulator-name = "vcc3v0_touch"; |
| 331 | regulator-always-on; |
| 332 | regulator-boot-on; |
| 333 | regulator-min-microvolt = <3000000>; |
| 334 | regulator-max-microvolt = <3000000>; |
| 335 | regulator-state-mem { |
| 336 | regulator-off-in-suspend; |
| 337 | }; |
| 338 | }; |
| 339 | |
| 340 | vcca_1v8: LDO_REG3 { |
| 341 | regulator-name = "vcca_1v8"; |
| 342 | regulator-always-on; |
| 343 | regulator-boot-on; |
| 344 | regulator-min-microvolt = <1800000>; |
| 345 | regulator-max-microvolt = <1800000>; |
| 346 | regulator-state-mem { |
| 347 | regulator-on-in-suspend; |
| 348 | regulator-suspend-microvolt = <1800000>; |
| 349 | }; |
| 350 | }; |
| 351 | |
| 352 | vcc_sdio: LDO_REG4 { |
| 353 | regulator-name = "vcc_sdio"; |
| 354 | regulator-always-on; |
| 355 | regulator-boot-on; |
| 356 | regulator-min-microvolt = <1800000>; |
| 357 | regulator-max-microvolt = <3000000>; |
| 358 | regulator-state-mem { |
| 359 | regulator-on-in-suspend; |
| 360 | regulator-suspend-microvolt = <3000000>; |
| 361 | }; |
| 362 | }; |
| 363 | |
| 364 | vcca3v0_codec: LDO_REG5 { |
| 365 | regulator-name = "vcca3v0_codec"; |
| 366 | regulator-always-on; |
| 367 | regulator-boot-on; |
| 368 | regulator-min-microvolt = <3000000>; |
| 369 | regulator-max-microvolt = <3000000>; |
| 370 | regulator-state-mem { |
| 371 | regulator-off-in-suspend; |
| 372 | }; |
| 373 | }; |
| 374 | |
| 375 | vcc_1v5: LDO_REG6 { |
| 376 | regulator-name = "vcc_1v5"; |
| 377 | regulator-always-on; |
| 378 | regulator-boot-on; |
| 379 | regulator-min-microvolt = <1500000>; |
| 380 | regulator-max-microvolt = <1500000>; |
| 381 | regulator-state-mem { |
| 382 | regulator-on-in-suspend; |
| 383 | regulator-suspend-microvolt = <1500000>; |
| 384 | }; |
| 385 | }; |
| 386 | |
| 387 | vcca1v8_codec: LDO_REG7 { |
| 388 | regulator-name = "vcca1v8_codec"; |
| 389 | regulator-always-on; |
| 390 | regulator-boot-on; |
| 391 | regulator-min-microvolt = <1800000>; |
| 392 | regulator-max-microvolt = <1800000>; |
| 393 | regulator-state-mem { |
| 394 | regulator-off-in-suspend; |
| 395 | }; |
| 396 | }; |
| 397 | |
| 398 | vcc_3v0: LDO_REG8 { |
| 399 | regulator-name = "vcc_3v0"; |
| 400 | regulator-always-on; |
| 401 | regulator-boot-on; |
| 402 | regulator-min-microvolt = <3000000>; |
| 403 | regulator-max-microvolt = <3000000>; |
| 404 | regulator-state-mem { |
| 405 | regulator-on-in-suspend; |
| 406 | regulator-suspend-microvolt = <3000000>; |
| 407 | }; |
| 408 | }; |
| 409 | |
| 410 | vcc3v3_s3: vcc_lan: SWITCH_REG1 { |
| 411 | regulator-name = "vcc3v3_s3"; |
| 412 | regulator-always-on; |
| 413 | regulator-boot-on; |
| 414 | regulator-state-mem { |
| 415 | regulator-off-in-suspend; |
| 416 | }; |
| 417 | }; |
| 418 | |
| 419 | vcc3v3_s0: SWITCH_REG2 { |
| 420 | regulator-name = "vcc3v3_s0"; |
| 421 | regulator-always-on; |
| 422 | regulator-boot-on; |
| 423 | regulator-state-mem { |
| 424 | regulator-off-in-suspend; |
| 425 | }; |
| 426 | }; |
| 427 | }; |
| 428 | }; |
| 429 | |
| 430 | vdd_cpu_b: regulator@40 { |
| 431 | compatible = "silergy,syr827"; |
| 432 | reg = <0x40>; |
| 433 | fcs,suspend-voltage-selector = <1>; |
| 434 | pinctrl-names = "default"; |
| 435 | pinctrl-0 = <&vsel1_gpio>; |
| 436 | regulator-name = "vdd_cpu_b"; |
| 437 | regulator-min-microvolt = <712500>; |
| 438 | regulator-max-microvolt = <1500000>; |
| 439 | regulator-ramp-delay = <1000>; |
| 440 | regulator-always-on; |
| 441 | regulator-boot-on; |
| 442 | vin-supply = <&vcc5v0_sys>; |
| 443 | |
| 444 | regulator-state-mem { |
| 445 | regulator-off-in-suspend; |
| 446 | }; |
| 447 | }; |
| 448 | |
| 449 | vdd_gpu: regulator@41 { |
| 450 | compatible = "silergy,syr828"; |
| 451 | reg = <0x41>; |
| 452 | fcs,suspend-voltage-selector = <1>; |
| 453 | pinctrl-names = "default"; |
| 454 | pinctrl-0 = <&vsel2_gpio>; |
| 455 | regulator-name = "vdd_gpu"; |
| 456 | regulator-min-microvolt = <712500>; |
| 457 | regulator-max-microvolt = <1500000>; |
| 458 | regulator-ramp-delay = <1000>; |
| 459 | regulator-always-on; |
| 460 | regulator-boot-on; |
| 461 | vin-supply = <&vcc5v0_sys>; |
| 462 | |
| 463 | regulator-state-mem { |
| 464 | regulator-off-in-suspend; |
| 465 | }; |
| 466 | }; |
| 467 | }; |
| 468 | |
| 469 | &i2c1 { |
| 470 | i2c-scl-rising-time-ns = <300>; |
| 471 | i2c-scl-falling-time-ns = <15>; |
| 472 | status = "okay"; |
| 473 | }; |
| 474 | |
| 475 | &i2c3 { |
| 476 | i2c-scl-rising-time-ns = <450>; |
| 477 | i2c-scl-falling-time-ns = <15>; |
| 478 | status = "okay"; |
| 479 | }; |
| 480 | |
| 481 | &i2c4 { |
| 482 | i2c-scl-rising-time-ns = <600>; |
| 483 | i2c-scl-falling-time-ns = <20>; |
| 484 | status = "okay"; |
| 485 | |
| 486 | fusb0: typec-portc@22 { |
| 487 | compatible = "fcs,fusb302"; |
| 488 | reg = <0x22>; |
| 489 | interrupt-parent = <&gpio1>; |
| 490 | interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; |
| 491 | pinctrl-names = "default"; |
| 492 | pinctrl-0 = <&fusb0_int>; |
| 493 | vbus-supply = <&vcc5v0_typec>; |
| 494 | status = "okay"; |
| 495 | }; |
| 496 | }; |
| 497 | |
| 498 | &i2s0 { |
| 499 | rockchip,playback-channels = <8>; |
| 500 | rockchip,capture-channels = <8>; |
| 501 | status = "okay"; |
| 502 | }; |
| 503 | |
| 504 | &i2s1 { |
| 505 | rockchip,playback-channels = <2>; |
| 506 | rockchip,capture-channels = <2>; |
| 507 | status = "okay"; |
| 508 | }; |
| 509 | |
| 510 | &i2s2 { |
| 511 | status = "okay"; |
| 512 | }; |
| 513 | |
| 514 | &io_domains { |
| 515 | status = "okay"; |
| 516 | |
| 517 | bt656-supply = <&vcc1v8_dvp>; |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 518 | audio-supply = <&vcc_3v0>; |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 519 | sdmmc-supply = <&vcc_sdio>; |
| 520 | gpio1830-supply = <&vcc_3v0>; |
| 521 | }; |
| 522 | |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 523 | &pcie0 { |
| 524 | ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; |
| 525 | num-lanes = <4>; |
| 526 | pinctrl-names = "default"; |
| 527 | pinctrl-0 = <&pcie_perst>; |
| 528 | vpcie12v-supply = <&vcc12v_dcin>; |
| 529 | vpcie3v3-supply = <&vcc3v3_pcie>; |
| 530 | status = "okay"; |
| 531 | }; |
| 532 | |
| 533 | &pcie_phy { |
| 534 | status = "okay"; |
| 535 | }; |
| 536 | |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 537 | &pmu_io_domains { |
| 538 | pmu1830-supply = <&vcc_3v0>; |
| 539 | status = "okay"; |
| 540 | }; |
| 541 | |
| 542 | &pinctrl { |
| 543 | buttons { |
| 544 | pwrbtn: pwrbtn { |
| 545 | rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 546 | }; |
| 547 | }; |
| 548 | |
| 549 | fusb302x { |
| 550 | fusb0_int: fusb0-int { |
| 551 | rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 552 | }; |
| 553 | }; |
| 554 | |
| 555 | leds { |
| 556 | work_led_gpio: work_led-gpio { |
| 557 | rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 558 | }; |
| 559 | |
| 560 | diy_led_gpio: diy_led-gpio { |
| 561 | rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 562 | }; |
| 563 | }; |
| 564 | |
| 565 | pcie { |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 566 | pcie_perst: pcie-perst { |
| 567 | rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 568 | }; |
| 569 | |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 570 | pcie_pwr_en: pcie-pwr-en { |
| 571 | rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 572 | }; |
| 573 | }; |
| 574 | |
| 575 | pmic { |
| 576 | pmic_int_l: pmic-int-l { |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 577 | rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 578 | }; |
| 579 | |
| 580 | vsel1_gpio: vsel1-gpio { |
| 581 | rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; |
| 582 | }; |
| 583 | |
| 584 | vsel2_gpio: vsel2-gpio { |
| 585 | rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; |
| 586 | }; |
| 587 | }; |
| 588 | |
| 589 | sdio-pwrseq { |
| 590 | wifi_enable_h: wifi-enable-h { |
| 591 | rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 592 | }; |
| 593 | }; |
| 594 | |
| 595 | usb-typec { |
| 596 | vcc5v0_typec_en: vcc5v0_typec_en { |
| 597 | rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 598 | }; |
| 599 | }; |
| 600 | |
| 601 | usb2 { |
| 602 | vcc5v0_host_en: vcc5v0-host-en { |
| 603 | rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 604 | }; |
| 605 | }; |
| 606 | }; |
| 607 | |
| 608 | &pwm0 { |
| 609 | status = "okay"; |
| 610 | }; |
| 611 | |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 612 | &pwm1 { |
| 613 | status = "okay"; |
| 614 | }; |
| 615 | |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 616 | &pwm2 { |
| 617 | status = "okay"; |
| 618 | }; |
| 619 | |
| 620 | &saradc { |
| 621 | vref-supply = <&vcca1v8_s3>; |
| 622 | status = "okay"; |
| 623 | }; |
| 624 | |
| 625 | &sdmmc { |
| 626 | bus-width = <4>; |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 627 | cap-sd-highspeed; |
| 628 | cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
| 629 | disable-wp; |
| 630 | max-frequency = <150000000>; |
| 631 | pinctrl-names = "default"; |
| 632 | pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; |
| 633 | status = "okay"; |
| 634 | }; |
| 635 | |
| 636 | &sdhci { |
| 637 | bus-width = <8>; |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 638 | mmc-hs200-1_8v; |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 639 | non-removable; |
| 640 | status = "okay"; |
| 641 | }; |
| 642 | |
Soeren Moch | c600a0b | 2019-11-07 12:11:21 +0100 | [diff] [blame] | 643 | &spi1 { |
| 644 | status = "okay"; |
| 645 | |
| 646 | flash@0 { |
| 647 | compatible = "jedec,spi-nor"; |
| 648 | reg = <0>; |
| 649 | spi-max-frequency = <10000000>; |
| 650 | }; |
| 651 | }; |
| 652 | |
Jagan Teki | 2a2d35f | 2019-05-17 15:59:40 +0530 | [diff] [blame] | 653 | &tcphy0 { |
| 654 | status = "okay"; |
| 655 | }; |
| 656 | |
| 657 | &tcphy1 { |
| 658 | status = "okay"; |
| 659 | }; |
| 660 | |
| 661 | &tsadc { |
| 662 | /* tshut mode 0:CRU 1:GPIO */ |
| 663 | rockchip,hw-tshut-mode = <1>; |
| 664 | /* tshut polarity 0:LOW 1:HIGH */ |
| 665 | rockchip,hw-tshut-polarity = <1>; |
| 666 | status = "okay"; |
| 667 | }; |
| 668 | |
| 669 | &u2phy0 { |
| 670 | status = "okay"; |
| 671 | |
| 672 | u2phy0_otg: otg-port { |
| 673 | status = "okay"; |
| 674 | }; |
| 675 | |
| 676 | u2phy0_host: host-port { |
| 677 | phy-supply = <&vcc5v0_host>; |
| 678 | status = "okay"; |
| 679 | }; |
| 680 | }; |
| 681 | |
| 682 | &u2phy1 { |
| 683 | status = "okay"; |
| 684 | |
| 685 | u2phy1_otg: otg-port { |
| 686 | status = "okay"; |
| 687 | }; |
| 688 | |
| 689 | u2phy1_host: host-port { |
| 690 | phy-supply = <&vcc5v0_host>; |
| 691 | status = "okay"; |
| 692 | }; |
| 693 | }; |
| 694 | |
| 695 | &uart0 { |
| 696 | pinctrl-names = "default"; |
| 697 | pinctrl-0 = <&uart0_xfer &uart0_cts>; |
| 698 | status = "okay"; |
| 699 | }; |
| 700 | |
| 701 | &uart2 { |
| 702 | status = "okay"; |
| 703 | }; |
| 704 | |
| 705 | &usb_host0_ehci { |
| 706 | status = "okay"; |
| 707 | }; |
| 708 | |
| 709 | &usb_host0_ohci { |
| 710 | status = "okay"; |
| 711 | }; |
| 712 | |
| 713 | &usb_host1_ehci { |
| 714 | status = "okay"; |
| 715 | }; |
| 716 | |
| 717 | &usb_host1_ohci { |
| 718 | status = "okay"; |
| 719 | }; |
| 720 | |
| 721 | &usbdrd3_0 { |
| 722 | status = "okay"; |
| 723 | }; |
| 724 | |
| 725 | &usbdrd_dwc3_0 { |
| 726 | status = "okay"; |
| 727 | dr_mode = "otg"; |
| 728 | }; |
| 729 | |
| 730 | &usbdrd3_1 { |
| 731 | status = "okay"; |
| 732 | }; |
| 733 | |
| 734 | &usbdrd_dwc3_1 { |
| 735 | status = "okay"; |
| 736 | dr_mode = "host"; |
| 737 | }; |
| 738 | |
| 739 | &vopb { |
| 740 | status = "okay"; |
| 741 | }; |
| 742 | |
| 743 | &vopb_mmu { |
| 744 | status = "okay"; |
| 745 | }; |
| 746 | |
| 747 | &vopl { |
| 748 | status = "okay"; |
| 749 | }; |
| 750 | |
| 751 | &vopl_mmu { |
| 752 | status = "okay"; |
| 753 | }; |