Simon Glass | 7ff6104 | 2021-08-08 12:20:28 -0600 | [diff] [blame] | 1 | menuconfig POWER |
| 2 | bool "Power" |
| 3 | default y |
| 4 | help |
| 5 | Enable support for power control in U-Boot. This includes support |
| 6 | for PMICs (Power-management Integrated Circuits) and some of the |
| 7 | features provided by PMICs. In particular, voltage regulators can |
| 8 | be used to enable/disable power and vary its voltage. That can be |
| 9 | useful in U-Boot to turn on boot peripherals and adjust CPU voltage |
| 10 | so that the clock speed can be increased. This enables the drivers |
| 11 | in drivers/power, drivers/power/pmic and drivers/power/regulator |
| 12 | as part of a build. |
| 13 | |
| 14 | if POWER |
Przemyslaw Marczak | 9a8bc95 | 2015-04-20 20:07:41 +0200 | [diff] [blame] | 15 | |
Simon Glass | 3133941 | 2021-08-08 12:20:27 -0600 | [diff] [blame] | 16 | config POWER_LEGACY |
| 17 | bool "Legacy power support" |
| 18 | help |
| 19 | Note: This is a legacy option. Use DM_PMIC instead. |
| 20 | |
| 21 | Enable support for power control in U-Boot. This includes support |
| 22 | for PMICs (Power-management Integrated Circuits) and some of the |
| 23 | features provided by PMICs. In particular, voltage regulators can |
| 24 | be used to enable/disable power and vary its voltage. That can be |
| 25 | useful in U-Boot to turn on boot peripherals and adjust CPU voltage |
| 26 | so that the clock speed can be increased. This enables the drivers |
| 27 | in drivers/power, drivers/power/pmic and drivers/power/regulator |
| 28 | as part of a build. |
| 29 | |
| 30 | config SPL_POWER_LEGACY |
| 31 | bool "Legacy power support in SPL" |
Tom Rini | 0a83cc2 | 2022-06-10 23:03:09 -0400 | [diff] [blame] | 32 | depends on SPL && !SPL_DM_PMIC |
Simon Glass | 3133941 | 2021-08-08 12:20:27 -0600 | [diff] [blame] | 33 | default y if POWER_LEGACY |
| 34 | help |
| 35 | Note: This is a legacy option. Use SPL_DM_PMIC instead. |
| 36 | |
| 37 | Enable support for power control in SPL. This includes support |
| 38 | for PMICs (Power-management Integrated Circuits) and some of the |
| 39 | features provided by PMICs. In particular, voltage regulators can |
| 40 | be used to enable/disable power and vary its voltage. That can be |
| 41 | useful in SPL to turn on boot peripherals and adjust CPU voltage |
| 42 | so that the clock speed can be increased. This enables the drivers |
| 43 | in drivers/power, drivers/power/pmic and drivers/power/regulator |
| 44 | as part of a build. |
| 45 | |
Simon Glass | 5e5c0cd | 2019-12-06 21:41:53 -0700 | [diff] [blame] | 46 | source "drivers/power/acpi_pmc/Kconfig" |
| 47 | |
Stephen Warren | 92c67fa | 2016-07-13 13:45:31 -0600 | [diff] [blame] | 48 | source "drivers/power/domain/Kconfig" |
| 49 | |
Przemyslaw Marczak | 9a8bc95 | 2015-04-20 20:07:41 +0200 | [diff] [blame] | 50 | source "drivers/power/pmic/Kconfig" |
| 51 | |
Przemyslaw Marczak | 08edd00 | 2015-04-20 20:07:42 +0200 | [diff] [blame] | 52 | source "drivers/power/regulator/Kconfig" |
| 53 | |
Hans de Goede | 70ce2c8 | 2015-09-30 15:12:30 +0200 | [diff] [blame] | 54 | choice |
| 55 | prompt "Select Sunxi PMIC Variant" |
| 56 | depends on ARCH_SUNXI |
| 57 | default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I |
Chen-Yu Tsai | 478a3c5 | 2016-11-30 15:30:30 +0800 | [diff] [blame] | 58 | default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40 |
Jernej Skrabec | e638e05 | 2021-01-11 21:11:46 +0100 | [diff] [blame] | 59 | default AXP305_POWER if MACH_SUN50I_H616 |
vishnupatekar | 91bce9c | 2015-11-29 01:07:21 +0800 | [diff] [blame] | 60 | default AXP818_POWER if MACH_SUN8I_A83T |
Icenowy Zheng | 365951a | 2020-10-26 22:19:34 +0800 | [diff] [blame] | 61 | default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S |
Hans de Goede | 70ce2c8 | 2015-09-30 15:12:30 +0200 | [diff] [blame] | 62 | |
| 63 | config SUNXI_NO_PMIC |
Masahiro Yamada | 78cd22a | 2016-08-12 10:26:50 +0900 | [diff] [blame] | 64 | bool "board without a pmic" |
Hans de Goede | 70ce2c8 | 2015-09-30 15:12:30 +0200 | [diff] [blame] | 65 | ---help--- |
| 66 | Select this for boards which do not use a PMIC. |
| 67 | |
| 68 | config AXP152_POWER |
Masahiro Yamada | 78cd22a | 2016-08-12 10:26:50 +0900 | [diff] [blame] | 69 | bool "axp152 pmic support" |
Hans de Goede | 70ce2c8 | 2015-09-30 15:12:30 +0200 | [diff] [blame] | 70 | depends on MACH_SUN5I |
Jagan Teki | feb2927 | 2018-02-14 22:28:30 +0530 | [diff] [blame] | 71 | select AXP_PMIC_BUS |
Hans de Goede | d728da1 | 2015-12-20 16:10:01 +0100 | [diff] [blame] | 72 | select CMD_POWEROFF |
Hans de Goede | 70ce2c8 | 2015-09-30 15:12:30 +0200 | [diff] [blame] | 73 | ---help--- |
| 74 | Select this to enable support for the axp152 pmic found on most |
| 75 | A10s boards. |
| 76 | |
| 77 | config AXP209_POWER |
Masahiro Yamada | 78cd22a | 2016-08-12 10:26:50 +0900 | [diff] [blame] | 78 | bool "axp209 pmic support" |
Icenowy Zheng | 365951a | 2020-10-26 22:19:34 +0800 | [diff] [blame] | 79 | depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_V3S |
Jagan Teki | feb2927 | 2018-02-14 22:28:30 +0530 | [diff] [blame] | 80 | select AXP_PMIC_BUS |
Michael van Slingerland | 8fb31fe | 2015-12-13 13:17:31 +0100 | [diff] [blame] | 81 | select CMD_POWEROFF |
Hans de Goede | 70ce2c8 | 2015-09-30 15:12:30 +0200 | [diff] [blame] | 82 | ---help--- |
| 83 | Select this to enable support for the axp209 pmic found on most |
| 84 | A10, A13 and A20 boards. |
| 85 | |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 86 | config AXP221_POWER |
Masahiro Yamada | 78cd22a | 2016-08-12 10:26:50 +0900 | [diff] [blame] | 87 | bool "axp221 / axp223 pmic support" |
Chen-Yu Tsai | 478a3c5 | 2016-11-30 15:30:30 +0800 | [diff] [blame] | 88 | depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40 |
Jagan Teki | feb2927 | 2018-02-14 22:28:30 +0530 | [diff] [blame] | 89 | select AXP_PMIC_BUS |
Hans de Goede | 6391f0e | 2015-12-20 16:14:31 +0100 | [diff] [blame] | 90 | select CMD_POWEROFF |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 91 | ---help--- |
Hans de Goede | 70ce2c8 | 2015-09-30 15:12:30 +0200 | [diff] [blame] | 92 | Select this to enable support for the axp221/axp223 pmic found on most |
| 93 | A23 and A31 boards. |
| 94 | |
Jernej Skrabec | fde828c | 2021-01-11 21:11:33 +0100 | [diff] [blame] | 95 | config AXP305_POWER |
| 96 | bool "axp305 pmic support" |
| 97 | depends on MACH_SUN50I_H616 |
| 98 | select AXP_PMIC_BUS |
| 99 | select CMD_POWEROFF |
| 100 | ---help--- |
| 101 | Select this to enable support for the axp305 pmic found on most |
| 102 | H616 boards. |
| 103 | |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 104 | config AXP809_POWER |
Masahiro Yamada | 78cd22a | 2016-08-12 10:26:50 +0900 | [diff] [blame] | 105 | bool "axp809 pmic support" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 106 | depends on MACH_SUN9I |
Jagan Teki | feb2927 | 2018-02-14 22:28:30 +0530 | [diff] [blame] | 107 | select AXP_PMIC_BUS |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 108 | select CMD_POWEROFF |
| 109 | ---help--- |
| 110 | Say y here to enable support for the axp809 pmic found on A80 boards. |
| 111 | |
vishnupatekar | 91bce9c | 2015-11-29 01:07:21 +0800 | [diff] [blame] | 112 | config AXP818_POWER |
Masahiro Yamada | 78cd22a | 2016-08-12 10:26:50 +0900 | [diff] [blame] | 113 | bool "axp818 pmic support" |
vishnupatekar | 91bce9c | 2015-11-29 01:07:21 +0800 | [diff] [blame] | 114 | depends on MACH_SUN8I_A83T |
Jagan Teki | feb2927 | 2018-02-14 22:28:30 +0530 | [diff] [blame] | 115 | select AXP_PMIC_BUS |
Chen-Yu Tsai | 45f192c | 2016-05-02 10:28:14 +0800 | [diff] [blame] | 116 | select CMD_POWEROFF |
vishnupatekar | 91bce9c | 2015-11-29 01:07:21 +0800 | [diff] [blame] | 117 | ---help--- |
| 118 | Say y here to enable support for the axp818 pmic found on |
| 119 | A83T dev board. |
| 120 | |
Jelle van der Waa | 3f3a309 | 2016-02-23 18:47:19 +0100 | [diff] [blame] | 121 | config SY8106A_POWER |
Masahiro Yamada | 78cd22a | 2016-08-12 10:26:50 +0900 | [diff] [blame] | 122 | bool "SY8106A pmic support" |
Andre Przywara | 5fb9743 | 2017-02-16 01:20:27 +0000 | [diff] [blame] | 123 | depends on MACH_SUNXI_H3_H5 |
Jelle van der Waa | 3f3a309 | 2016-02-23 18:47:19 +0100 | [diff] [blame] | 124 | ---help--- |
| 125 | Select this to enable support for the SY8106A pmic found on some |
| 126 | H3 boards. |
| 127 | |
Hans de Goede | 70ce2c8 | 2015-09-30 15:12:30 +0200 | [diff] [blame] | 128 | endchoice |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 129 | |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 130 | config AXP_DCDC1_VOLT |
| 131 | int "axp pmic dcdc1 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 132 | depends on AXP221_POWER || AXP809_POWER || AXP818_POWER |
Chen-Yu Tsai | 478a3c5 | 2016-11-30 15:30:30 +0800 | [diff] [blame] | 133 | default 3300 if AXP818_POWER || MACH_SUN8I_R40 |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 134 | default 3000 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I |
Hans de Goede | 7865548 | 2014-12-13 14:12:06 +0100 | [diff] [blame] | 135 | ---help--- |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 136 | Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to |
| 137 | disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for |
| 138 | generic 3.3V IO voltage for external devices like the lcd-panal and |
| 139 | sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 140 | save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T |
| 141 | dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally |
| 142 | powers some of the pingroups, NAND/eMMC, SD/MMC, and USB OTG. |
Hans de Goede | 7865548 | 2014-12-13 14:12:06 +0100 | [diff] [blame] | 143 | |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 144 | config AXP_DCDC2_VOLT |
| 145 | int "axp pmic dcdc2 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 146 | depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER |
vishnupatekar | 91bce9c | 2015-11-29 01:07:21 +0800 | [diff] [blame] | 147 | default 900 if AXP818_POWER |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 148 | default 1400 if AXP152_POWER || AXP209_POWER |
Hans de Goede | cf96e3f | 2015-10-03 15:21:53 +0200 | [diff] [blame] | 149 | default 1200 if MACH_SUN6I |
| 150 | default 1100 if MACH_SUN8I |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 151 | default 0 if MACH_SUN9I |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 152 | ---help--- |
| 153 | Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to |
| 154 | disable dcdc2. |
| 155 | On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V. |
| 156 | On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V. |
Hans de Goede | cf96e3f | 2015-10-03 15:21:53 +0200 | [diff] [blame] | 157 | On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V. |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 158 | On A80 boards dcdc2 powers the GPU and can be left off. |
vishnupatekar | 91bce9c | 2015-11-29 01:07:21 +0800 | [diff] [blame] | 159 | On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V. |
Chen-Yu Tsai | 478a3c5 | 2016-11-30 15:30:30 +0800 | [diff] [blame] | 160 | On R40 boards dcdc2 is VDD-CPU and should be 1.1V |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 161 | |
| 162 | config AXP_DCDC3_VOLT |
| 163 | int "axp pmic dcdc3 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 164 | depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER |
| 165 | default 900 if AXP809_POWER || AXP818_POWER |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 166 | default 1500 if AXP152_POWER |
| 167 | default 1250 if AXP209_POWER |
Chen-Yu Tsai | 478a3c5 | 2016-11-30 15:30:30 +0800 | [diff] [blame] | 168 | default 1100 if MACH_SUN8I_R40 |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 169 | default 1200 if MACH_SUN6I || MACH_SUN8I |
| 170 | ---help--- |
| 171 | Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to |
| 172 | disable dcdc3. |
| 173 | On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and |
| 174 | should be 1.25V. |
| 175 | On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V. |
| 176 | On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V. |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 177 | On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V. |
vishnupatekar | 91bce9c | 2015-11-29 01:07:21 +0800 | [diff] [blame] | 178 | On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V. |
Chen-Yu Tsai | 478a3c5 | 2016-11-30 15:30:30 +0800 | [diff] [blame] | 179 | On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V. |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 180 | |
| 181 | config AXP_DCDC4_VOLT |
| 182 | int "axp pmic dcdc4 voltage" |
Jernej Skrabec | fde828c | 2021-01-11 21:11:33 +0100 | [diff] [blame] | 183 | depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP305_POWER |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 184 | default 1250 if AXP152_POWER |
| 185 | default 1200 if MACH_SUN6I |
| 186 | default 0 if MACH_SUN8I |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 187 | default 900 if MACH_SUN9I |
Jernej Skrabec | fde828c | 2021-01-11 21:11:33 +0100 | [diff] [blame] | 188 | default 1500 if AXP305_POWER |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 189 | ---help--- |
| 190 | Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to |
| 191 | disable dcdc4. |
| 192 | On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V. |
| 193 | On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V. |
| 194 | On A23 / A33 boards dcdc4 is unused and should be disabled. |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 195 | On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V. |
vishnupatekar | 91bce9c | 2015-11-29 01:07:21 +0800 | [diff] [blame] | 196 | On A83T boards dcdc4 is used for VDD-GPU. |
Jernej Skrabec | fde828c | 2021-01-11 21:11:33 +0100 | [diff] [blame] | 197 | On H616 boards dcdcd is used for VCC-DRAM. |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 198 | |
| 199 | config AXP_DCDC5_VOLT |
| 200 | int "axp pmic dcdc5 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 201 | depends on AXP221_POWER || AXP809_POWER || AXP818_POWER |
| 202 | default 1500 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 203 | ---help--- |
| 204 | Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to |
| 205 | disable dcdc5. |
Chen-Yu Tsai | 478a3c5 | 2016-11-30 15:30:30 +0800 | [diff] [blame] | 206 | On A23 / A31 / A33 / A80 / A83T / R40 boards dcdc5 is VCC-DRAM and |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 207 | should be 1.5V, 1.35V if DDR3L is used. |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 208 | |
| 209 | config AXP_ALDO1_VOLT |
| 210 | int "axp pmic (a)ldo1 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 211 | depends on AXP221_POWER || AXP809_POWER || AXP818_POWER |
Chen-Yu Tsai | 478a3c5 | 2016-11-30 15:30:30 +0800 | [diff] [blame] | 212 | default 0 if MACH_SUN6I || MACH_SUN8I_R40 |
Chen-Yu Tsai | c05aa39 | 2016-01-12 14:42:40 +0800 | [diff] [blame] | 213 | default 1800 if MACH_SUN8I_A83T |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 214 | default 3000 if MACH_SUN8I || MACH_SUN9I |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 215 | ---help--- |
| 216 | Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to |
| 217 | disable aldo1. |
| 218 | On A31 boards aldo1 is often used to power the wifi module. |
| 219 | On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V. |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 220 | On A80 boards aldo1 powers the USB hosts and should be 3.0V. |
Chen-Yu Tsai | c05aa39 | 2016-01-12 14:42:40 +0800 | [diff] [blame] | 221 | On A83T / H8 boards aldo1 is used for MIPI CSI, DSI, HDMI, EFUSE, and |
| 222 | should be 1.8V. |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 223 | |
| 224 | config AXP_ALDO2_VOLT |
| 225 | int "axp pmic (a)ldo2 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 226 | depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 227 | default 3000 if AXP152_POWER || AXP209_POWER |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 228 | default 0 if MACH_SUN6I || MACH_SUN9I |
Chen-Yu Tsai | c05aa39 | 2016-01-12 14:42:40 +0800 | [diff] [blame] | 229 | default 1800 if MACH_SUN8I_A83T |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 230 | default 2500 if MACH_SUN8I |
Hans de Goede | c6c47c2 | 2015-08-14 16:19:34 +0200 | [diff] [blame] | 231 | ---help--- |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 232 | Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to |
| 233 | disable aldo2. |
| 234 | On A10(s) / A13 / A20 boards aldo2 is AVCC and should be 3.0V. |
| 235 | On A31 boards aldo2 is typically unused and should be disabled. |
| 236 | On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V. |
| 237 | On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V. |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 238 | On A80 boards aldo2 powers PB pingroup and camera IO and can be left off. |
Chen-Yu Tsai | c05aa39 | 2016-01-12 14:42:40 +0800 | [diff] [blame] | 239 | On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC, |
| 240 | LPDDR2, and the codec. It should be 1.8V. |
Hans de Goede | c6c47c2 | 2015-08-14 16:19:34 +0200 | [diff] [blame] | 241 | |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 242 | config AXP_ALDO3_VOLT |
| 243 | int "axp pmic (a)ldo3 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 244 | depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER |
| 245 | default 0 if AXP209_POWER || MACH_SUN9I |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 246 | default 3000 if MACH_SUN6I || MACH_SUN8I |
| 247 | ---help--- |
| 248 | Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to |
| 249 | disable aldo3. |
| 250 | On A10(s) / A13 / A20 boards aldo3 should be 2.8V. |
Chen-Yu Tsai | 478a3c5 | 2016-11-30 15:30:30 +0800 | [diff] [blame] | 251 | On A23 / A31 / A33 / R40 boards aldo3 is VCC-PLL and AVCC and should |
| 252 | be 3.0V. |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 253 | On A80 boards aldo3 is normally not used. |
Chen-Yu Tsai | c05aa39 | 2016-01-12 14:42:40 +0800 | [diff] [blame] | 254 | On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be |
| 255 | 3.0V. |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 256 | |
Olliver Schinagl | 353b4cf | 2018-11-21 20:05:30 +0200 | [diff] [blame] | 257 | choice |
| 258 | prompt "axp pmic (a)ldo3 voltage rate control" |
| 259 | depends on AXP209_POWER |
| 260 | default AXP_ALDO3_VOLT_SLOPE_NONE |
| 261 | ---help--- |
| 262 | The AXP can slowly ramp up voltage to reduce the inrush current when |
| 263 | changing voltages. |
| 264 | Note, this does not apply when enabling/disabling LDO3. See |
| 265 | "axp pmic (a)ldo3 inrush quirk" below to enable a slew rate to limit |
| 266 | inrush current on broken board designs. |
| 267 | |
| 268 | config AXP_ALDO3_VOLT_SLOPE_NONE |
| 269 | bool "No voltage slope" |
| 270 | ---help--- |
| 271 | Tries to reach the next voltage setting near instantaneously. Measurements |
| 272 | indicate that this is about 0.0167 V/uS. |
| 273 | |
| 274 | config AXP_ALDO3_VOLT_SLOPE_16 |
| 275 | bool "1.6 mV per uS" |
| 276 | ---help--- |
| 277 | Increases the voltage by 1.6 mV per uS until the final voltage has |
| 278 | been reached. Note that the scaling is in 25 mV steps and thus |
| 279 | the slew rate in reality is about 25 mV/31.250 uS. |
| 280 | |
| 281 | config AXP_ALDO3_VOLT_SLOPE_08 |
| 282 | bool "0.8 mV per uS" |
| 283 | ---help--- |
| 284 | Increases the voltage by 0.8 mV per uS until the final voltage has |
| 285 | been reached. Note that the scaling is in 25 mV steps however and thus |
| 286 | the slew rate in reality is about 25 mV/15.625 uS. |
| 287 | This is the slowest supported rate. |
| 288 | |
| 289 | endchoice |
| 290 | |
Olliver Schinagl | 9e77d61 | 2018-11-21 20:05:31 +0200 | [diff] [blame] | 291 | config AXP_ALDO3_INRUSH_QUIRK |
| 292 | bool "axp pmic (a)ldo3 inrush quirk" |
| 293 | depends on AXP209_POWER |
Olliver Schinagl | 9e77d61 | 2018-11-21 20:05:31 +0200 | [diff] [blame] | 294 | ---help--- |
| 295 | The reference design denotes a value of 4.7 uF for the output capacitor |
| 296 | of LDO3. Some boards have too high capacitance causing an inrush current |
| 297 | and resulting an AXP209 shutdown. |
| 298 | |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 299 | config AXP_ALDO4_VOLT |
| 300 | int "axp pmic (a)ldo4 voltage" |
| 301 | depends on AXP209_POWER |
Hans de Goede | a8c8491 | 2015-10-03 15:29:24 +0200 | [diff] [blame] | 302 | default 0 if AXP209_POWER |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 303 | ---help--- |
| 304 | Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to |
| 305 | disable aldo4. |
| 306 | On A10(s) / A13 / A20 boards aldo4 should be 2.8V. |
| 307 | |
| 308 | config AXP_DLDO1_VOLT |
| 309 | int "axp pmic dldo1 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 310 | depends on AXP221_POWER || AXP809_POWER || AXP818_POWER |
Hans de Goede | be4929c | 2014-12-13 14:02:38 +0100 | [diff] [blame] | 311 | default 0 |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 312 | ---help--- |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 313 | Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to |
| 314 | disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 315 | to power the ethernet phy. On A23, A33 and A80 boards this is often |
| 316 | used to power the wifi. |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 317 | |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 318 | config AXP_DLDO2_VOLT |
| 319 | int "axp pmic dldo2 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 320 | depends on AXP221_POWER || AXP809_POWER || AXP818_POWER |
| 321 | default 3000 if MACH_SUN9I |
Hans de Goede | be4929c | 2014-12-13 14:02:38 +0100 | [diff] [blame] | 322 | default 0 |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 323 | ---help--- |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 324 | Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to |
| 325 | disable dldo2. |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 326 | On A80 boards dldo2 normally powers the PL pins and should be 3.0V. |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 327 | |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 328 | config AXP_DLDO3_VOLT |
| 329 | int "axp pmic dldo3 voltage" |
Chen-Yu Tsai | 265015b | 2016-01-12 14:42:38 +0800 | [diff] [blame] | 330 | depends on AXP221_POWER || AXP818_POWER |
Hans de Goede | be4929c | 2014-12-13 14:02:38 +0100 | [diff] [blame] | 331 | default 0 |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 332 | ---help--- |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 333 | Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to |
| 334 | disable dldo3. |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 335 | |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 336 | config AXP_DLDO4_VOLT |
| 337 | int "axp pmic dldo4 voltage" |
vishnupatekar | 91bce9c | 2015-11-29 01:07:21 +0800 | [diff] [blame] | 338 | depends on AXP221_POWER || AXP818_POWER |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 339 | default 0 |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 340 | ---help--- |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 341 | Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to |
| 342 | disable dldo4. |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 343 | |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 344 | config AXP_ELDO1_VOLT |
| 345 | int "axp pmic eldo1 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 346 | depends on AXP221_POWER || AXP809_POWER || AXP818_POWER |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 347 | default 0 |
| 348 | ---help--- |
| 349 | Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to |
| 350 | disable eldo1. |
| 351 | |
| 352 | config AXP_ELDO2_VOLT |
| 353 | int "axp pmic eldo2 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 354 | depends on AXP221_POWER || AXP809_POWER || AXP818_POWER |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 355 | default 0 |
Oliver Schinagl | d3a558d | 2013-07-26 12:56:58 +0200 | [diff] [blame] | 356 | ---help--- |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 357 | Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to |
| 358 | disable eldo2. |
Siarhei Siamashka | 7e4eb6c | 2015-01-19 05:23:30 +0200 | [diff] [blame] | 359 | |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 360 | config AXP_ELDO3_VOLT |
| 361 | int "axp pmic eldo3 voltage" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 362 | depends on AXP221_POWER || AXP809_POWER || AXP818_POWER |
| 363 | default 3000 if MACH_SUN9I |
Siarhei Siamashka | 7e4eb6c | 2015-01-19 05:23:30 +0200 | [diff] [blame] | 364 | default 0 |
| 365 | ---help--- |
Hans de Goede | 04bfd41 | 2015-09-30 15:22:42 +0200 | [diff] [blame] | 366 | Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to |
Siarhei Siamashka | 7e4eb6c | 2015-01-19 05:23:30 +0200 | [diff] [blame] | 367 | disable eldo3. On some A31(s) tablets it might be used to supply |
| 368 | 1.2V for the SSD2828 chip (converter of parallel LCD interface |
| 369 | into MIPI DSI). |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 370 | On A80 boards it powers the PM pingroup and should be 3.0V. |
Przemyslaw Marczak | 9a8bc95 | 2015-04-20 20:07:41 +0200 | [diff] [blame] | 371 | |
Chen-Yu Tsai | d028fba | 2016-03-30 00:26:48 +0800 | [diff] [blame] | 372 | config AXP_FLDO1_VOLT |
| 373 | int "axp pmic fldo1 voltage" |
| 374 | depends on AXP818_POWER |
| 375 | default 0 if MACH_SUN8I_A83T |
| 376 | ---help--- |
| 377 | Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to |
| 378 | disable fldo1. |
| 379 | On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is |
| 380 | used. |
| 381 | |
| 382 | config AXP_FLDO2_VOLT |
Chen-Yu Tsai | 7096534 | 2016-05-02 10:28:11 +0800 | [diff] [blame] | 383 | int "axp pmic fldo2 voltage" |
Chen-Yu Tsai | d028fba | 2016-03-30 00:26:48 +0800 | [diff] [blame] | 384 | depends on AXP818_POWER |
| 385 | default 900 if MACH_SUN8I_A83T |
| 386 | ---help--- |
| 387 | Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to |
| 388 | disable fldo2. |
| 389 | On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V. |
| 390 | |
| 391 | config AXP_FLDO3_VOLT |
| 392 | int "axp pmic fldo3 voltage" |
| 393 | depends on AXP818_POWER |
| 394 | default 0 |
| 395 | ---help--- |
| 396 | Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to |
| 397 | disable fldo3. |
| 398 | |
Chen-Yu Tsai | 0e3efd3 | 2016-05-02 10:28:12 +0800 | [diff] [blame] | 399 | config AXP_SW_ON |
| 400 | bool "axp pmic sw on" |
Chen-Yu Tsai | f1e66e7 | 2016-05-02 10:28:15 +0800 | [diff] [blame] | 401 | depends on AXP809_POWER || AXP818_POWER |
Chen-Yu Tsai | 0e3efd3 | 2016-05-02 10:28:12 +0800 | [diff] [blame] | 402 | ---help--- |
| 403 | Enable to turn on axp pmic sw. |
| 404 | |
Jelle van der Waa | 3f3a309 | 2016-02-23 18:47:19 +0100 | [diff] [blame] | 405 | config SY8106A_VOUT1_VOLT |
| 406 | int "SY8106A pmic VOUT1 voltage" |
| 407 | depends on SY8106A_POWER |
| 408 | default 1200 |
| 409 | ---help--- |
| 410 | Set the voltage (mV) to program the SY8106A pmic VOUT1. This |
| 411 | is typically used to power the VDD-CPU and should be 1200mV. |
| 412 | Values can range from 680mV till 1950mV. |
| 413 | |
Tom Rini | 7b6e5d0 | 2022-11-19 18:45:35 -0500 | [diff] [blame] | 414 | config TPS6586X_POWER |
| 415 | bool "Enable legacy driver for TI TPS6586x power management chip" |
| 416 | |
Adam Ford | bc16804 | 2017-04-26 13:41:31 -0500 | [diff] [blame] | 417 | config TWL4030_POWER |
| 418 | depends on OMAP34XX |
| 419 | bool "Enable driver for TI TWL4030 power management chip" |
Adam Ford | c53d613 | 2017-05-13 07:02:24 -0500 | [diff] [blame] | 420 | imply CMD_POWEROFF |
Adam Ford | bc16804 | 2017-04-26 13:41:31 -0500 | [diff] [blame] | 421 | ---help--- |
| 422 | The TWL4030 in a combination audio CODEC/power management with |
| 423 | GPIO and it is commonly used with the OMAP3 family of processors |
| 424 | |
Tom Rini | 7b6e5d0 | 2022-11-19 18:45:35 -0500 | [diff] [blame] | 425 | config TWL6030_POWER |
| 426 | depends on OMAP44XX |
| 427 | bool "Enable driver for TI TWL6030 power management chip" |
| 428 | |
Frank Wunderlich | 06aeb74 | 2019-11-22 15:32:24 +0100 | [diff] [blame] | 429 | config POWER_MT6323 |
| 430 | bool "Poweroff driver for mediatek mt6323" |
| 431 | select CMD_POWEROFF |
| 432 | help |
| 433 | This adds poweroff driver for mt6323 |
| 434 | this pmic is used on mt7623 / Bananapi R2 |
| 435 | |
Tom Rini | ac7f321 | 2022-06-25 11:02:38 -0400 | [diff] [blame] | 436 | config PALMAS_POWER |
| 437 | bool "Palmas power support" |
| 438 | depends on OMAP54XX |
| 439 | |
Tom Rini | db9d925 | 2022-11-19 18:45:15 -0500 | [diff] [blame] | 440 | config POWER_FSL |
| 441 | bool "Power control (legacy) for Freescale / NXP platforms" |
| 442 | depends on POWER_LEGACY |
| 443 | |
Simon Glass | 3133941 | 2021-08-08 12:20:27 -0600 | [diff] [blame] | 444 | config POWER_I2C |
| 445 | bool "I2C-based power control for legacy power" |
| 446 | depends on POWER_LEGACY |
| 447 | help |
| 448 | Enable this to use the I2C driver designed for the legacy PMIC |
| 449 | interface. |
| 450 | |
| 451 | Not to be used for new designs and existing ones should be moved to |
| 452 | the new PMIC interface based on driver model. |
| 453 | |
Tom Rini | db9d925 | 2022-11-19 18:45:15 -0500 | [diff] [blame] | 454 | config POWER_SPI |
| 455 | bool "SPI-based power control for legacy power_fsl driver" |
| 456 | depends on POWER_FSL && !POWER_I2C |
| 457 | |
Simon Glass | 3133941 | 2021-08-08 12:20:27 -0600 | [diff] [blame] | 458 | config SPL_POWER_I2C |
| 459 | bool "I2C-based power control for legacy power" |
| 460 | depends on SPL_POWER_LEGACY |
| 461 | default y if POWER_I2C |
| 462 | help |
| 463 | Enable this to use the I2C driver designed for the legacy PMIC |
| 464 | interface. |
| 465 | |
| 466 | Not to be used for new designs and existing ones should be moved to |
| 467 | the new PMIC interface based on driver model. |
| 468 | |
Tom Rini | db9d925 | 2022-11-19 18:45:15 -0500 | [diff] [blame] | 469 | choice |
| 470 | prompt "PMIC chip" |
| 471 | default POWER_FSL_MC13892 |
| 472 | depends on POWER_FSL && POWER_I2C |
| 473 | |
| 474 | config POWER_FSL_MC13892 |
| 475 | bool "MC13892" |
| 476 | |
| 477 | config POWER_FSL_MC34704 |
| 478 | bool "MC34704" |
| 479 | |
| 480 | endchoice |
| 481 | |
Simon Glass | 7ff6104 | 2021-08-08 12:20:28 -0600 | [diff] [blame] | 482 | endif |