Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / b4b65ecba1a0fa4c0f22150737307a933a707b8b / . / arch / arm / dts / imx6ul-14x14-evk.dtsi
blob: 463d7ca124bd5a632808fe5a82fc6cef1cb8053b [file] [log] [blame]
Peng Fana05280e2019-08-08 09:55:33 +0000[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2//
3// Copyright (C) 2015 Freescale Semiconductor, Inc.
4
5/ {
6 aliases {
7 spi5 = &{/spi4};
8 };
9
10 chosen {
11 stdout-path = &uart1;
12 };
13
14 memory@80000000 {
15 device_type = "memory";
16 reg = <0x80000000 0x20000000>;
17 };
18
19 backlight_display: backlight-display {
20 compatible = "pwm-backlight";
21 pwms = <&pwm1 0 5000000>;
22 brightness-levels = <0 4 8 16 32 64 128 255>;
23 default-brightness-level = <6>;
24 status = "okay";
25 };
26
27
28 reg_sd1_vmmc: regulator-sd1-vmmc {
29 compatible = "regulator-fixed";
30 regulator-name = "VSD_3V3";
31 regulator-min-microvolt = <3300000>;
32 regulator-max-microvolt = <3300000>;
33 gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
34 enable-active-high;
35 };
36
37 reg_can_3v3: regulator-can-3v3 {
38 compatible = "regulator-fixed";
39 regulator-name = "can-3v3";
40 regulator-min-microvolt = <3300000>;
41 regulator-max-microvolt = <3300000>;
42 gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
43 };
44
45 spi4 {
46 compatible = "spi-gpio";
47 pinctrl-names = "default";
48 pinctrl-0 = <&pinctrl_spi4>;
49 status = "okay";
50 gpio-sck = <&gpio5 11 0>;
51 gpio-mosi = <&gpio5 10 0>;
52 cs-gpios = <&gpio5 7 0>;
53 num-chipselects = <1>;
54 #address-cells = <1>;
55 #size-cells = <0>;
56
57 gpio_spi: gpio@0 {
58 compatible = "fairchild,74hc595";
59 gpio-controller;
60 #gpio-cells = <2>;
61 reg = <0>;
62 registers-number = <1>;
63 spi-max-frequency = <100000>;
64 };
65 };
66
67 panel {
68 compatible = "innolux,at043tn24";
69 backlight = <&backlight_display>;
70
71 port {
72 panel_in: endpoint {
73 remote-endpoint = <&display_out>;
74 };
75 };
76 };
77};
78
79&clks {
80 assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
81 assigned-clock-rates = <786432000>;
82};
83
84&i2c2 {
85 clock_frequency = <100000>;
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_i2c2>;
88 status = "okay";
89
90 codec: wm8960@1a {
91 #sound-dai-cells = <0>;
92 compatible = "wlf,wm8960";
93 reg = <0x1a>;
94 wlf,shared-lrclk;
95 };
96};
97
98&fec1 {
99 pinctrl-names = "default";
100 pinctrl-0 = <&pinctrl_enet1>;
101 phy-mode = "rmii";
102 phy-handle = <&ethphy0>;
103 status = "okay";
104};
105
106&fec2 {
107 pinctrl-names = "default";
108 pinctrl-0 = <&pinctrl_enet2>;
109 phy-mode = "rmii";
110 phy-handle = <&ethphy1>;
111 status = "okay";
112
113 mdio {
114 #address-cells = <1>;
115 #size-cells = <0>;
116
117 ethphy0: ethernet-phy@2 {
118 reg = <2>;
119 micrel,led-mode = <1>;
120 clocks = <&clks IMX6UL_CLK_ENET_REF>;
121 clock-names = "rmii-ref";
122 };
123
124 ethphy1: ethernet-phy@1 {
125 reg = <1>;
126 micrel,led-mode = <1>;
127 clocks = <&clks IMX6UL_CLK_ENET2_REF>;
128 clock-names = "rmii-ref";
129 };
130 };
131};
132
133&can1 {
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_flexcan1>;
136 xceiver-supply = <&reg_can_3v3>;
137 status = "okay";
138};
139
140&can2 {
141 pinctrl-names = "default";
142 pinctrl-0 = <&pinctrl_flexcan2>;
143 xceiver-supply = <&reg_can_3v3>;
144 status = "okay";
145};
146
147&i2c1 {
148 clock-frequency = <100000>;
149 pinctrl-names = "default", "gpio";
150 pinctrl-0 = <&pinctrl_i2c1>;
151 pinctrl-1 = <&pinctrl_i2c1_gpio>;
152 scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
153 sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
154 status = "okay";
155
156 mag3110@e {
157 compatible = "fsl,mag3110";
158 reg = <0x0e>;
159 };
160};
161
162&lcdif {
163 assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
164 assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
165 pinctrl-names = "default";
166 pinctrl-0 = <&pinctrl_lcdif_dat
167 &pinctrl_lcdif_ctrl>;
168 status = "okay";
169
170 port {
171 display_out: endpoint {
172 remote-endpoint = <&panel_in>;
173 };
174 };
175};
176
177&pwm1 {
178 pinctrl-names = "default";
179 pinctrl-0 = <&pinctrl_pwm1>;
180 status = "okay";
181};
182
183&qspi {
184 pinctrl-names = "default";
185 pinctrl-0 = <&pinctrl_qspi>;
186 status = "okay";
187
188 flash0: n25q256a@0 {
189 #address-cells = <1>;
190 #size-cells = <1>;
191 compatible = "micron,n25q256a";
192 spi-max-frequency = <29000000>;
193 spi-rx-bus-width = <4>;
194 spi-tx-bus-width = <4>;
195 reg = <0>;
196 };
197};
198
199&sai2 {
200 pinctrl-names = "default";
201 pinctrl-0 = <&pinctrl_sai2>;
202 assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
203 <&clks IMX6UL_CLK_SAI2>;
204 assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
205 assigned-clock-rates = <0>, <12288000>;
206 fsl,sai-mclk-direction-output;
207 status = "okay";
208};
209
210&snvs_poweroff {
211 status = "okay";
212};
213
214&tsc {
215 pinctrl-names = "default";
216 pinctrl-0 = <&pinctrl_tsc>;
217 xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
218 measure-delay-time = <0xffff>;
219 pre-charge-time = <0xfff>;
220 status = "okay";
221};
222
223&uart1 {
224 pinctrl-names = "default";
225 pinctrl-0 = <&pinctrl_uart1>;
226 status = "okay";
227};
228
229&uart2 {
230 pinctrl-names = "default";
231 pinctrl-0 = <&pinctrl_uart2>;
232 uart-has-rtscts;
233 status = "okay";
234};
235
236&usbotg1 {
237 dr_mode = "otg";
238 status = "okay";
239};
240
241&usbotg2 {
242 dr_mode = "host";
243 disable-over-current;
244 status = "okay";
245};
246
247&usbphy1 {
248 fsl,tx-d-cal = <106>;
249};
250
251&usbphy2 {
252 fsl,tx-d-cal = <106>;
253};
254
255&usdhc1 {
256 pinctrl-names = "default", "state_100mhz", "state_200mhz";
257 pinctrl-0 = <&pinctrl_usdhc1>;
258 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
259 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
260 cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
261 keep-power-in-suspend;
262 wakeup-source;
263 vmmc-supply = <&reg_sd1_vmmc>;
264 status = "okay";
265};
266
267&usdhc2 {
268 pinctrl-names = "default";
269 pinctrl-0 = <&pinctrl_usdhc2>;
270 no-1-8-v;
Fabio Estevam64aabd92020-01-06 20:11:28 -0300[diff] [blame]271 broken-cd;
Peng Fana05280e2019-08-08 09:55:33 +0000[diff] [blame]272 keep-power-in-suspend;
273 wakeup-source;
274 status = "okay";
275};
276
277&wdog1 {
278 pinctrl-names = "default";
279 pinctrl-0 = <&pinctrl_wdog>;
280 fsl,ext-reset-output;
281};
282
283&iomuxc {
284 pinctrl-names = "default";
285
286 pinctrl_csi1: csi1grp {
287 fsl,pins = <
288 MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
289 MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
290 MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
291 MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
292 MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
293 MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
294 MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
295 MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
296 MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
297 MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
298 MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
299 MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
300 >;
301 };
302
303 pinctrl_enet1: enet1grp {
304 fsl,pins = <
305 MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
306 MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
307 MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
308 MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
309 MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
310 MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
311 MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
312 MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
313 >;
314 };
315
316 pinctrl_enet2: enet2grp {
317 fsl,pins = <
318 MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
319 MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
320 MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
321 MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
322 MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
323 MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
324 MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
325 MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
326 MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
327 MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
328 >;
329 };
330
331 pinctrl_flexcan1: flexcan1grp{
332 fsl,pins = <
333 MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
334 MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
335 >;
336 };
337
338 pinctrl_flexcan2: flexcan2grp{
339 fsl,pins = <
340 MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
341 MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
342 >;
343 };
344
345 pinctrl_i2c1: i2c1grp {
346 fsl,pins = <
347 MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
348 MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
349 >;
350 };
351
352 pinctrl_i2c1_gpio: i2c1grp_gpio {
353 fsl,pins = <
354 MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
355 MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
356 >;
357 };
358
359 pinctrl_i2c2: i2c2grp {
360 fsl,pins = <
361 MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
362 MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
363 >;
364 };
365
366 pinctrl_lcdif_dat: lcdifdatgrp {
367 fsl,pins = <
368 MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
369 MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
370 MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
371 MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
372 MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
373 MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
374 MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
375 MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
376 MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
377 MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
378 MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
379 MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
380 MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
381 MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
382 MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
383 MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
384 MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
385 MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
386 MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
387 MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
388 MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
389 MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
390 MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
391 MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
392 >;
393 };
394
395 pinctrl_lcdif_ctrl: lcdifctrlgrp {
396 fsl,pins = <
397 MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
398 MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
399 MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
400 MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
401 /* used for lcd reset */
402 MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
403 >;
404 };
405
406 pinctrl_qspi: qspigrp {
407 fsl,pins = <
408 MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
409 MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
410 MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
411 MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
412 MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
413 MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
414 >;
415 };
416
417 pinctrl_sai2: sai2grp {
418 fsl,pins = <
419 MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
420 MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
421 MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
422 MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
423 MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
424 MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
425 >;
426 };
427
428 pinctrl_pwm1: pwm1grp {
429 fsl,pins = <
430 MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
431 >;
432 };
433
434 pinctrl_sim2: sim2grp {
435 fsl,pins = <
436 MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808
437 MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31
438 MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808
439 MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808
440 MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809
441 MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008
442 >;
443 };
444
445 pinctrl_spi4: spi4grp {
446 fsl,pins = <
447 MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1
448 MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1
449 MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1
450 MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000
451 >;
452 };
453
454 pinctrl_tsc: tscgrp {
455 fsl,pins = <
456 MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
457 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
458 MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
459 MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
460 >;
461 };
462
463 pinctrl_uart1: uart1grp {
464 fsl,pins = <
465 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
466 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
467 >;
468 };
469
470 pinctrl_uart2: uart2grp {
471 fsl,pins = <
472 MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
473 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
474 MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
475 MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
476 >;
477 };
478
479 pinctrl_usdhc1: usdhc1grp {
480 fsl,pins = <
481 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
482 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
483 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
484 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
485 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
486 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
487 MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
488 MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
489 MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
490 >;
491 };
492
493 pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
494 fsl,pins = <
495 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
496 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
497 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
498 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
499 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
500 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
501
502 >;
503 };
504
505 pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
506 fsl,pins = <
507 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
508 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
509 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
510 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
511 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
512 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
513 >;
514 };
515
516 pinctrl_usdhc2: usdhc2grp {
517 fsl,pins = <
518 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059
519 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
520 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
521 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
522 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
523 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
524 >;
525 };
526
527 pinctrl_wdog: wdoggrp {
528 fsl,pins = <
529 MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
530 >;
531 };
532};