Yannick Fertré | 5b855d4 | 2019-10-07 15:29:08 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright (C) 2019 STMicroelectronics - All Rights Reserved |
| 4 | * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics. |
| 5 | * Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics. |
| 6 | * |
| 7 | * This otm8009a panel driver is inspired from the Linux Kernel driver |
| 8 | * drivers/gpu/drm/panel/panel-orisetech-otm8009a.c. |
| 9 | */ |
| 10 | #include <common.h> |
| 11 | #include <backlight.h> |
| 12 | #include <dm.h> |
| 13 | #include <mipi_dsi.h> |
| 14 | #include <panel.h> |
| 15 | #include <asm/gpio.h> |
| 16 | #include <power/regulator.h> |
| 17 | |
| 18 | #define OTM8009A_BACKLIGHT_DEFAULT 240 |
| 19 | #define OTM8009A_BACKLIGHT_MAX 255 |
| 20 | |
| 21 | /* Manufacturer Command Set */ |
| 22 | #define MCS_ADRSFT 0x0000 /* Address Shift Function */ |
| 23 | #define MCS_PANSET 0xB3A6 /* Panel Type Setting */ |
| 24 | #define MCS_SD_CTRL 0xC0A2 /* Source Driver Timing Setting */ |
| 25 | #define MCS_P_DRV_M 0xC0B4 /* Panel Driving Mode */ |
| 26 | #define MCS_OSC_ADJ 0xC181 /* Oscillator Adjustment for Idle/Normal mode */ |
| 27 | #define MCS_RGB_VID_SET 0xC1A1 /* RGB Video Mode Setting */ |
| 28 | #define MCS_SD_PCH_CTRL 0xC480 /* Source Driver Precharge Control */ |
| 29 | #define MCS_NO_DOC1 0xC48A /* Command not documented */ |
| 30 | #define MCS_PWR_CTRL1 0xC580 /* Power Control Setting 1 */ |
| 31 | #define MCS_PWR_CTRL2 0xC590 /* Power Control Setting 2 for Normal Mode */ |
| 32 | #define MCS_PWR_CTRL4 0xC5B0 /* Power Control Setting 4 for DC Voltage */ |
| 33 | #define MCS_PANCTRLSET1 0xCB80 /* Panel Control Setting 1 */ |
| 34 | #define MCS_PANCTRLSET2 0xCB90 /* Panel Control Setting 2 */ |
| 35 | #define MCS_PANCTRLSET3 0xCBA0 /* Panel Control Setting 3 */ |
| 36 | #define MCS_PANCTRLSET4 0xCBB0 /* Panel Control Setting 4 */ |
| 37 | #define MCS_PANCTRLSET5 0xCBC0 /* Panel Control Setting 5 */ |
| 38 | #define MCS_PANCTRLSET6 0xCBD0 /* Panel Control Setting 6 */ |
| 39 | #define MCS_PANCTRLSET7 0xCBE0 /* Panel Control Setting 7 */ |
| 40 | #define MCS_PANCTRLSET8 0xCBF0 /* Panel Control Setting 8 */ |
| 41 | #define MCS_PANU2D1 0xCC80 /* Panel U2D Setting 1 */ |
| 42 | #define MCS_PANU2D2 0xCC90 /* Panel U2D Setting 2 */ |
| 43 | #define MCS_PANU2D3 0xCCA0 /* Panel U2D Setting 3 */ |
| 44 | #define MCS_PAND2U1 0xCCB0 /* Panel D2U Setting 1 */ |
| 45 | #define MCS_PAND2U2 0xCCC0 /* Panel D2U Setting 2 */ |
| 46 | #define MCS_PAND2U3 0xCCD0 /* Panel D2U Setting 3 */ |
| 47 | #define MCS_GOAVST 0xCE80 /* GOA VST Setting */ |
| 48 | #define MCS_GOACLKA1 0xCEA0 /* GOA CLKA1 Setting */ |
| 49 | #define MCS_GOACLKA3 0xCEB0 /* GOA CLKA3 Setting */ |
| 50 | #define MCS_GOAECLK 0xCFC0 /* GOA ECLK Setting */ |
| 51 | #define MCS_NO_DOC2 0xCFD0 /* Command not documented */ |
| 52 | #define MCS_GVDDSET 0xD800 /* GVDD/NGVDD */ |
| 53 | #define MCS_VCOMDC 0xD900 /* VCOM Voltage Setting */ |
| 54 | #define MCS_GMCT2_2P 0xE100 /* Gamma Correction 2.2+ Setting */ |
| 55 | #define MCS_GMCT2_2N 0xE200 /* Gamma Correction 2.2- Setting */ |
| 56 | #define MCS_NO_DOC3 0xF5B6 /* Command not documented */ |
| 57 | #define MCS_CMD2_ENA1 0xFF00 /* Enable Access Command2 "CMD2" */ |
| 58 | #define MCS_CMD2_ENA2 0xFF80 /* Enable Access Orise Command2 */ |
| 59 | |
| 60 | struct otm8009a_panel_priv { |
| 61 | struct udevice *reg; |
| 62 | struct gpio_desc reset; |
| 63 | unsigned int lanes; |
| 64 | enum mipi_dsi_pixel_format format; |
| 65 | unsigned long mode_flags; |
| 66 | }; |
| 67 | |
| 68 | static const struct display_timing default_timing = { |
| 69 | .pixelclock.typ = 29700000, |
| 70 | .hactive.typ = 480, |
| 71 | .hfront_porch.typ = 98, |
| 72 | .hback_porch.typ = 98, |
| 73 | .hsync_len.typ = 32, |
| 74 | .vactive.typ = 800, |
| 75 | .vfront_porch.typ = 15, |
| 76 | .vback_porch.typ = 14, |
| 77 | .vsync_len.typ = 10, |
| 78 | }; |
| 79 | |
| 80 | static void otm8009a_dcs_write_buf(struct udevice *dev, const void *data, |
| 81 | size_t len) |
| 82 | { |
| 83 | struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); |
| 84 | struct mipi_dsi_device *device = plat->device; |
| 85 | |
| 86 | if (mipi_dsi_dcs_write_buffer(device, data, len) < 0) |
| 87 | dev_err(dev, "mipi dsi dcs write buffer failed\n"); |
| 88 | } |
| 89 | |
| 90 | static void otm8009a_dcs_write_buf_hs(struct udevice *dev, const void *data, |
| 91 | size_t len) |
| 92 | { |
| 93 | struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); |
| 94 | struct mipi_dsi_device *device = plat->device; |
| 95 | |
| 96 | /* data will be sent in dsi hs mode (ie. no lpm) */ |
| 97 | device->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| 98 | |
| 99 | if (mipi_dsi_dcs_write_buffer(device, data, len) < 0) |
| 100 | dev_err(dev, "mipi dsi dcs write buffer failed\n"); |
| 101 | |
| 102 | /* restore back the dsi lpm mode */ |
| 103 | device->mode_flags |= MIPI_DSI_MODE_LPM; |
| 104 | } |
| 105 | |
| 106 | #define dcs_write_seq(dev, seq...) \ |
| 107 | ({ \ |
| 108 | static const u8 d[] = { seq }; \ |
| 109 | otm8009a_dcs_write_buf(dev, d, ARRAY_SIZE(d)); \ |
| 110 | }) |
| 111 | |
| 112 | #define dcs_write_seq_hs(dev, seq...) \ |
| 113 | ({ \ |
| 114 | static const u8 d[] = { seq }; \ |
| 115 | otm8009a_dcs_write_buf_hs(dev, d, ARRAY_SIZE(d)); \ |
| 116 | }) |
| 117 | |
| 118 | #define dcs_write_cmd_at(dev, cmd, seq...) \ |
| 119 | ({ \ |
| 120 | static const u16 c = cmd; \ |
| 121 | struct udevice *device = dev; \ |
| 122 | dcs_write_seq(device, MCS_ADRSFT, (c) & 0xFF); \ |
| 123 | dcs_write_seq(device, (c) >> 8, seq); \ |
| 124 | }) |
| 125 | |
| 126 | static int otm8009a_init_sequence(struct udevice *dev) |
| 127 | { |
| 128 | struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); |
| 129 | struct mipi_dsi_device *device = plat->device; |
| 130 | int ret; |
| 131 | |
| 132 | /* Enter CMD2 */ |
| 133 | dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0x80, 0x09, 0x01); |
| 134 | |
| 135 | /* Enter Orise Command2 */ |
| 136 | dcs_write_cmd_at(dev, MCS_CMD2_ENA2, 0x80, 0x09); |
| 137 | |
| 138 | dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL, 0x30); |
| 139 | mdelay(10); |
| 140 | |
| 141 | dcs_write_cmd_at(dev, MCS_NO_DOC1, 0x40); |
| 142 | mdelay(10); |
| 143 | |
| 144 | dcs_write_cmd_at(dev, MCS_PWR_CTRL4 + 1, 0xA9); |
| 145 | dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 1, 0x34); |
| 146 | dcs_write_cmd_at(dev, MCS_P_DRV_M, 0x50); |
| 147 | dcs_write_cmd_at(dev, MCS_VCOMDC, 0x4E); |
| 148 | dcs_write_cmd_at(dev, MCS_OSC_ADJ, 0x66); /* 65Hz */ |
| 149 | dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 2, 0x01); |
| 150 | dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 5, 0x34); |
| 151 | dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 4, 0x33); |
| 152 | dcs_write_cmd_at(dev, MCS_GVDDSET, 0x79, 0x79); |
| 153 | dcs_write_cmd_at(dev, MCS_SD_CTRL + 1, 0x1B); |
| 154 | dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 2, 0x83); |
| 155 | dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL + 1, 0x83); |
| 156 | dcs_write_cmd_at(dev, MCS_RGB_VID_SET, 0x0E); |
| 157 | dcs_write_cmd_at(dev, MCS_PANSET, 0x00, 0x01); |
| 158 | |
| 159 | dcs_write_cmd_at(dev, MCS_GOAVST, 0x85, 0x01, 0x00, 0x84, 0x01, 0x00); |
| 160 | dcs_write_cmd_at(dev, MCS_GOACLKA1, 0x18, 0x04, 0x03, 0x39, 0x00, 0x00, |
| 161 | 0x00, 0x18, 0x03, 0x03, 0x3A, 0x00, 0x00, 0x00); |
| 162 | dcs_write_cmd_at(dev, MCS_GOACLKA3, 0x18, 0x02, 0x03, 0x3B, 0x00, 0x00, |
| 163 | 0x00, 0x18, 0x01, 0x03, 0x3C, 0x00, 0x00, 0x00); |
| 164 | dcs_write_cmd_at(dev, MCS_GOAECLK, 0x01, 0x01, 0x20, 0x20, 0x00, 0x00, |
| 165 | 0x01, 0x02, 0x00, 0x00); |
| 166 | |
| 167 | dcs_write_cmd_at(dev, MCS_NO_DOC2, 0x00); |
| 168 | |
| 169 | dcs_write_cmd_at(dev, MCS_PANCTRLSET1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); |
| 170 | dcs_write_cmd_at(dev, MCS_PANCTRLSET2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 171 | 0, 0, 0, 0, 0); |
| 172 | dcs_write_cmd_at(dev, MCS_PANCTRLSET3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 173 | 0, 0, 0, 0, 0); |
| 174 | dcs_write_cmd_at(dev, MCS_PANCTRLSET4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); |
| 175 | dcs_write_cmd_at(dev, MCS_PANCTRLSET5, 0, 4, 4, 4, 4, 4, 0, 0, 0, 0, |
| 176 | 0, 0, 0, 0, 0); |
| 177 | dcs_write_cmd_at(dev, MCS_PANCTRLSET6, 0, 0, 0, 0, 0, 0, 4, 4, 4, 4, |
| 178 | 4, 0, 0, 0, 0); |
| 179 | dcs_write_cmd_at(dev, MCS_PANCTRLSET7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); |
| 180 | dcs_write_cmd_at(dev, MCS_PANCTRLSET8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, |
| 181 | 0xFF, 0xFF, 0xFF, 0xFF, 0xFF); |
| 182 | |
| 183 | dcs_write_cmd_at(dev, MCS_PANU2D1, 0x00, 0x26, 0x09, 0x0B, 0x01, 0x25, |
| 184 | 0x00, 0x00, 0x00, 0x00); |
| 185 | dcs_write_cmd_at(dev, MCS_PANU2D2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 186 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x26, 0x0A, 0x0C, 0x02); |
| 187 | dcs_write_cmd_at(dev, MCS_PANU2D3, 0x25, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 188 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); |
| 189 | dcs_write_cmd_at(dev, MCS_PAND2U1, 0x00, 0x25, 0x0C, 0x0A, 0x02, 0x26, |
| 190 | 0x00, 0x00, 0x00, 0x00); |
| 191 | dcs_write_cmd_at(dev, MCS_PAND2U2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 192 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x25, 0x0B, 0x09, 0x01); |
| 193 | dcs_write_cmd_at(dev, MCS_PAND2U3, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 194 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); |
| 195 | |
| 196 | dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 1, 0x66); |
| 197 | |
| 198 | dcs_write_cmd_at(dev, MCS_NO_DOC3, 0x06); |
| 199 | |
| 200 | dcs_write_cmd_at(dev, MCS_GMCT2_2P, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10, |
| 201 | 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A, |
| 202 | 0x01); |
| 203 | dcs_write_cmd_at(dev, MCS_GMCT2_2N, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10, |
| 204 | 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A, |
| 205 | 0x01); |
| 206 | |
| 207 | /* Exit CMD2 */ |
| 208 | dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0xFF, 0xFF, 0xFF); |
| 209 | |
| 210 | ret = mipi_dsi_dcs_nop(device); |
| 211 | if (ret) |
| 212 | return ret; |
| 213 | |
| 214 | ret = mipi_dsi_dcs_exit_sleep_mode(device); |
| 215 | if (ret) |
| 216 | return ret; |
| 217 | |
| 218 | /* Wait for sleep out exit */ |
| 219 | mdelay(120); |
| 220 | |
| 221 | /* Default portrait 480x800 rgb24 */ |
| 222 | dcs_write_seq(dev, MIPI_DCS_SET_ADDRESS_MODE, 0x00); |
| 223 | |
| 224 | ret = mipi_dsi_dcs_set_column_address(device, 0, |
| 225 | default_timing.hactive.typ - 1); |
| 226 | if (ret) |
| 227 | return ret; |
| 228 | |
| 229 | ret = mipi_dsi_dcs_set_page_address(device, 0, |
| 230 | default_timing.vactive.typ - 1); |
| 231 | if (ret) |
| 232 | return ret; |
| 233 | |
| 234 | /* See otm8009a driver documentation for pixel format descriptions */ |
| 235 | ret = mipi_dsi_dcs_set_pixel_format(device, MIPI_DCS_PIXEL_FMT_24BIT | |
| 236 | MIPI_DCS_PIXEL_FMT_24BIT << 4); |
| 237 | if (ret) |
| 238 | return ret; |
| 239 | |
| 240 | /* Disable CABC feature */ |
| 241 | dcs_write_seq(dev, MIPI_DCS_WRITE_POWER_SAVE, 0x00); |
| 242 | |
| 243 | ret = mipi_dsi_dcs_set_display_on(device); |
| 244 | if (ret) |
| 245 | return ret; |
| 246 | |
| 247 | ret = mipi_dsi_dcs_nop(device); |
| 248 | if (ret) |
| 249 | return ret; |
| 250 | |
| 251 | /* Send Command GRAM memory write (no parameters) */ |
| 252 | dcs_write_seq(dev, MIPI_DCS_WRITE_MEMORY_START); |
| 253 | |
| 254 | return 0; |
| 255 | } |
| 256 | |
| 257 | static int otm8009a_panel_enable_backlight(struct udevice *dev) |
| 258 | { |
| 259 | struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); |
| 260 | struct mipi_dsi_device *device = plat->device; |
| 261 | int ret; |
| 262 | |
| 263 | ret = mipi_dsi_attach(device); |
| 264 | if (ret < 0) |
| 265 | return ret; |
| 266 | |
| 267 | ret = otm8009a_init_sequence(dev); |
| 268 | if (ret) |
| 269 | return ret; |
| 270 | |
| 271 | /* |
| 272 | * Power on the backlight with the requested brightness |
| 273 | * Note We can not use mipi_dsi_dcs_set_display_brightness() |
| 274 | * as otm8009a driver support only 8-bit brightness (1 param). |
| 275 | */ |
| 276 | dcs_write_seq(dev, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, |
| 277 | OTM8009A_BACKLIGHT_DEFAULT); |
| 278 | |
| 279 | /* Update Brightness Control & Backlight */ |
| 280 | dcs_write_seq(dev, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24); |
| 281 | |
| 282 | /* Update Brightness Control & Backlight */ |
| 283 | dcs_write_seq_hs(dev, MIPI_DCS_WRITE_CONTROL_DISPLAY); |
| 284 | |
| 285 | /* Need to wait a few time before sending the first image */ |
| 286 | mdelay(10); |
| 287 | |
| 288 | return 0; |
| 289 | } |
| 290 | |
| 291 | static int otm8009a_panel_get_display_timing(struct udevice *dev, |
| 292 | struct display_timing *timings) |
| 293 | { |
| 294 | struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); |
| 295 | struct mipi_dsi_device *device = plat->device; |
| 296 | struct otm8009a_panel_priv *priv = dev_get_priv(dev); |
| 297 | |
| 298 | memcpy(timings, &default_timing, sizeof(*timings)); |
| 299 | |
| 300 | /* fill characteristics of DSI data link */ |
| 301 | device->lanes = priv->lanes; |
| 302 | device->format = priv->format; |
| 303 | device->mode_flags = priv->mode_flags; |
| 304 | |
| 305 | return 0; |
| 306 | } |
| 307 | |
| 308 | static int otm8009a_panel_ofdata_to_platdata(struct udevice *dev) |
| 309 | { |
| 310 | struct otm8009a_panel_priv *priv = dev_get_priv(dev); |
| 311 | int ret; |
| 312 | |
| 313 | if (IS_ENABLED(CONFIG_DM_REGULATOR)) { |
| 314 | ret = device_get_supply_regulator(dev, "power-supply", |
| 315 | &priv->reg); |
| 316 | if (ret && ret != -ENOENT) { |
| 317 | dev_err(dev, "Warning: cannot get power supply\n"); |
| 318 | return ret; |
| 319 | } |
| 320 | } |
| 321 | |
| 322 | ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset, |
| 323 | GPIOD_IS_OUT); |
| 324 | if (ret) { |
| 325 | dev_err(dev, "warning: cannot get reset GPIO\n"); |
| 326 | if (ret != -ENOENT) |
| 327 | return ret; |
| 328 | } |
| 329 | |
| 330 | return 0; |
| 331 | } |
| 332 | |
| 333 | static int otm8009a_panel_probe(struct udevice *dev) |
| 334 | { |
| 335 | struct otm8009a_panel_priv *priv = dev_get_priv(dev); |
| 336 | int ret; |
| 337 | |
| 338 | if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) { |
| 339 | dev_dbg(dev, "enable regulator '%s'\n", priv->reg->name); |
| 340 | ret = regulator_set_enable(priv->reg, true); |
| 341 | if (ret) |
| 342 | return ret; |
| 343 | } |
| 344 | |
| 345 | /* reset panel */ |
| 346 | dm_gpio_set_value(&priv->reset, true); |
| 347 | mdelay(1); /* >50us */ |
| 348 | dm_gpio_set_value(&priv->reset, false); |
| 349 | mdelay(10); /* >5ms */ |
| 350 | |
| 351 | priv->lanes = 2; |
| 352 | priv->format = MIPI_DSI_FMT_RGB888; |
| 353 | priv->mode_flags = MIPI_DSI_MODE_VIDEO | |
| 354 | MIPI_DSI_MODE_VIDEO_BURST | |
| 355 | MIPI_DSI_MODE_LPM; |
| 356 | |
| 357 | return 0; |
| 358 | } |
| 359 | |
| 360 | static const struct panel_ops otm8009a_panel_ops = { |
| 361 | .enable_backlight = otm8009a_panel_enable_backlight, |
| 362 | .get_display_timing = otm8009a_panel_get_display_timing, |
| 363 | }; |
| 364 | |
| 365 | static const struct udevice_id otm8009a_panel_ids[] = { |
| 366 | { .compatible = "orisetech,otm8009a" }, |
| 367 | { } |
| 368 | }; |
| 369 | |
| 370 | U_BOOT_DRIVER(otm8009a_panel) = { |
| 371 | .name = "otm8009a_panel", |
| 372 | .id = UCLASS_PANEL, |
| 373 | .of_match = otm8009a_panel_ids, |
| 374 | .ops = &otm8009a_panel_ops, |
| 375 | .ofdata_to_platdata = otm8009a_panel_ofdata_to_platdata, |
| 376 | .probe = otm8009a_panel_probe, |
| 377 | .platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat), |
| 378 | .priv_auto_alloc_size = sizeof(struct otm8009a_panel_priv), |
| 379 | }; |