Peng Fan | 9a0dc91 | 2019-03-05 02:32:35 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright 2018 NXP |
| 4 | * Peng Fan <peng.fan@nxp.com> |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <clk-uclass.h> |
| 9 | #include <dm.h> |
| 10 | #include <asm/arch/sci/sci.h> |
| 11 | #include <asm/arch/clock.h> |
| 12 | #include <dt-bindings/clock/imx8qm-clock.h> |
| 13 | #include <dt-bindings/soc/imx_rsrc.h> |
| 14 | #include <misc.h> |
| 15 | |
| 16 | #include "clk-imx8.h" |
| 17 | |
| 18 | #if CONFIG_IS_ENABLED(CMD_CLK) |
| 19 | struct imx8_clks imx8_clk_names[] = { |
| 20 | { IMX8QM_A53_DIV, "A53_DIV" }, |
| 21 | { IMX8QM_UART0_CLK, "UART0" }, |
| 22 | { IMX8QM_UART1_CLK, "UART1" }, |
| 23 | { IMX8QM_UART2_CLK, "UART2" }, |
| 24 | { IMX8QM_UART3_CLK, "UART3" }, |
| 25 | { IMX8QM_SDHC0_CLK, "SDHC0" }, |
| 26 | { IMX8QM_SDHC1_CLK, "SDHC1" }, |
| 27 | { IMX8QM_SDHC2_CLK, "SDHC2" }, |
| 28 | { IMX8QM_ENET0_AHB_CLK, "ENET0_AHB" }, |
| 29 | { IMX8QM_ENET0_IPG_CLK, "ENET0_IPG" }, |
| 30 | { IMX8QM_ENET0_REF_DIV, "ENET0_REF" }, |
| 31 | { IMX8QM_ENET0_PTP_CLK, "ENET0_PTP" }, |
| 32 | { IMX8QM_ENET1_AHB_CLK, "ENET1_AHB" }, |
| 33 | { IMX8QM_ENET1_IPG_CLK, "ENET1_IPG" }, |
| 34 | { IMX8QM_ENET1_REF_DIV, "ENET1_REF" }, |
| 35 | { IMX8QM_ENET1_PTP_CLK, "ENET1_PTP" }, |
| 36 | }; |
| 37 | |
| 38 | int num_clks = ARRAY_SIZE(imx8_clk_names); |
| 39 | #endif |
| 40 | |
| 41 | ulong imx8_clk_get_rate(struct clk *clk) |
| 42 | { |
| 43 | sc_pm_clk_t pm_clk; |
| 44 | ulong rate; |
| 45 | u16 resource; |
| 46 | int ret; |
| 47 | |
| 48 | debug("%s(#%lu)\n", __func__, clk->id); |
| 49 | |
| 50 | switch (clk->id) { |
| 51 | case IMX8QM_A53_DIV: |
| 52 | resource = SC_R_A53; |
| 53 | pm_clk = SC_PM_CLK_CPU; |
| 54 | break; |
| 55 | case IMX8QM_I2C0_CLK: |
| 56 | resource = SC_R_I2C_0; |
| 57 | pm_clk = SC_PM_CLK_PER; |
| 58 | break; |
| 59 | case IMX8QM_I2C1_CLK: |
| 60 | resource = SC_R_I2C_1; |
| 61 | pm_clk = SC_PM_CLK_PER; |
| 62 | break; |
| 63 | case IMX8QM_I2C2_CLK: |
| 64 | resource = SC_R_I2C_2; |
| 65 | pm_clk = SC_PM_CLK_PER; |
| 66 | break; |
| 67 | case IMX8QM_I2C3_CLK: |
| 68 | resource = SC_R_I2C_3; |
| 69 | pm_clk = SC_PM_CLK_PER; |
| 70 | break; |
| 71 | case IMX8QM_SDHC0_IPG_CLK: |
| 72 | case IMX8QM_SDHC0_CLK: |
| 73 | case IMX8QM_SDHC0_DIV: |
| 74 | resource = SC_R_SDHC_0; |
| 75 | pm_clk = SC_PM_CLK_PER; |
| 76 | break; |
| 77 | case IMX8QM_SDHC1_IPG_CLK: |
| 78 | case IMX8QM_SDHC1_CLK: |
| 79 | case IMX8QM_SDHC1_DIV: |
| 80 | resource = SC_R_SDHC_1; |
| 81 | pm_clk = SC_PM_CLK_PER; |
| 82 | break; |
Marcel Ziswiler | 62eb818 | 2019-05-31 19:00:17 +0300 | [diff] [blame] | 83 | case IMX8QM_SDHC2_IPG_CLK: |
| 84 | case IMX8QM_SDHC2_CLK: |
| 85 | case IMX8QM_SDHC2_DIV: |
| 86 | resource = SC_R_SDHC_2; |
| 87 | pm_clk = SC_PM_CLK_PER; |
| 88 | break; |
Peng Fan | 9a0dc91 | 2019-03-05 02:32:35 +0000 | [diff] [blame] | 89 | case IMX8QM_UART0_IPG_CLK: |
| 90 | case IMX8QM_UART0_CLK: |
| 91 | resource = SC_R_UART_0; |
| 92 | pm_clk = SC_PM_CLK_PER; |
| 93 | break; |
| 94 | case IMX8QM_UART1_CLK: |
| 95 | resource = SC_R_UART_1; |
| 96 | pm_clk = SC_PM_CLK_PER; |
| 97 | break; |
| 98 | case IMX8QM_UART2_CLK: |
| 99 | resource = SC_R_UART_2; |
| 100 | pm_clk = SC_PM_CLK_PER; |
| 101 | break; |
| 102 | case IMX8QM_UART3_CLK: |
| 103 | resource = SC_R_UART_3; |
| 104 | pm_clk = SC_PM_CLK_PER; |
| 105 | break; |
| 106 | case IMX8QM_ENET0_IPG_CLK: |
| 107 | case IMX8QM_ENET0_AHB_CLK: |
| 108 | case IMX8QM_ENET0_REF_DIV: |
| 109 | case IMX8QM_ENET0_PTP_CLK: |
| 110 | resource = SC_R_ENET_0; |
| 111 | pm_clk = SC_PM_CLK_PER; |
| 112 | break; |
| 113 | case IMX8QM_ENET1_IPG_CLK: |
| 114 | case IMX8QM_ENET1_AHB_CLK: |
| 115 | case IMX8QM_ENET1_REF_DIV: |
| 116 | case IMX8QM_ENET1_PTP_CLK: |
| 117 | resource = SC_R_ENET_1; |
| 118 | pm_clk = SC_PM_CLK_PER; |
| 119 | break; |
| 120 | default: |
| 121 | if (clk->id < IMX8QM_UART0_IPG_CLK || |
| 122 | clk->id >= IMX8QM_CLK_END) { |
| 123 | printf("%s(Invalid clk ID #%lu)\n", |
| 124 | __func__, clk->id); |
| 125 | return -EINVAL; |
| 126 | } |
| 127 | return -ENOTSUPP; |
| 128 | }; |
| 129 | |
| 130 | ret = sc_pm_get_clock_rate(-1, resource, pm_clk, |
| 131 | (sc_pm_clock_rate_t *)&rate); |
| 132 | if (ret) { |
| 133 | printf("%s err %d\n", __func__, ret); |
| 134 | return ret; |
| 135 | } |
| 136 | |
| 137 | return rate; |
| 138 | } |
| 139 | |
| 140 | ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate) |
| 141 | { |
| 142 | sc_pm_clk_t pm_clk; |
| 143 | u32 new_rate = rate; |
| 144 | u16 resource; |
| 145 | int ret; |
| 146 | |
| 147 | debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate); |
| 148 | |
| 149 | switch (clk->id) { |
| 150 | case IMX8QM_I2C0_CLK: |
| 151 | resource = SC_R_I2C_0; |
| 152 | pm_clk = SC_PM_CLK_PER; |
| 153 | break; |
| 154 | case IMX8QM_I2C1_CLK: |
| 155 | resource = SC_R_I2C_1; |
| 156 | pm_clk = SC_PM_CLK_PER; |
| 157 | break; |
| 158 | case IMX8QM_I2C2_CLK: |
| 159 | resource = SC_R_I2C_2; |
| 160 | pm_clk = SC_PM_CLK_PER; |
| 161 | break; |
| 162 | case IMX8QM_I2C3_CLK: |
| 163 | resource = SC_R_I2C_3; |
| 164 | pm_clk = SC_PM_CLK_PER; |
| 165 | break; |
| 166 | case IMX8QM_UART0_CLK: |
| 167 | resource = SC_R_UART_0; |
| 168 | pm_clk = SC_PM_CLK_PER; |
| 169 | break; |
| 170 | case IMX8QM_UART1_CLK: |
| 171 | resource = SC_R_UART_1; |
| 172 | pm_clk = SC_PM_CLK_PER; |
| 173 | break; |
| 174 | case IMX8QM_UART2_CLK: |
| 175 | resource = SC_R_UART_2; |
| 176 | pm_clk = SC_PM_CLK_PER; |
| 177 | break; |
| 178 | case IMX8QM_UART3_CLK: |
| 179 | resource = SC_R_UART_3; |
| 180 | pm_clk = SC_PM_CLK_PER; |
| 181 | break; |
| 182 | case IMX8QM_SDHC0_IPG_CLK: |
| 183 | case IMX8QM_SDHC0_CLK: |
| 184 | case IMX8QM_SDHC0_DIV: |
| 185 | resource = SC_R_SDHC_0; |
| 186 | pm_clk = SC_PM_CLK_PER; |
| 187 | break; |
| 188 | case IMX8QM_SDHC1_IPG_CLK: |
| 189 | case IMX8QM_SDHC1_CLK: |
| 190 | case IMX8QM_SDHC1_DIV: |
| 191 | resource = SC_R_SDHC_1; |
| 192 | pm_clk = SC_PM_CLK_PER; |
| 193 | break; |
Marcel Ziswiler | 62eb818 | 2019-05-31 19:00:17 +0300 | [diff] [blame] | 194 | case IMX8QM_SDHC2_IPG_CLK: |
| 195 | case IMX8QM_SDHC2_CLK: |
| 196 | case IMX8QM_SDHC2_DIV: |
| 197 | resource = SC_R_SDHC_2; |
| 198 | pm_clk = SC_PM_CLK_PER; |
| 199 | break; |
Peng Fan | 9a0dc91 | 2019-03-05 02:32:35 +0000 | [diff] [blame] | 200 | case IMX8QM_ENET0_IPG_CLK: |
| 201 | case IMX8QM_ENET0_AHB_CLK: |
| 202 | case IMX8QM_ENET0_REF_DIV: |
| 203 | case IMX8QM_ENET0_PTP_CLK: |
| 204 | case IMX8QM_ENET0_ROOT_DIV: |
| 205 | resource = SC_R_ENET_0; |
| 206 | pm_clk = SC_PM_CLK_PER; |
| 207 | break; |
| 208 | case IMX8QM_ENET1_IPG_CLK: |
| 209 | case IMX8QM_ENET1_AHB_CLK: |
| 210 | case IMX8QM_ENET1_REF_DIV: |
| 211 | case IMX8QM_ENET1_PTP_CLK: |
| 212 | case IMX8QM_ENET1_ROOT_DIV: |
| 213 | resource = SC_R_ENET_1; |
| 214 | pm_clk = SC_PM_CLK_PER; |
| 215 | break; |
| 216 | default: |
| 217 | if (clk->id < IMX8QM_UART0_IPG_CLK || |
| 218 | clk->id >= IMX8QM_CLK_END) { |
| 219 | printf("%s(Invalid clk ID #%lu)\n", |
| 220 | __func__, clk->id); |
| 221 | return -EINVAL; |
| 222 | } |
| 223 | return -ENOTSUPP; |
| 224 | }; |
| 225 | |
| 226 | ret = sc_pm_set_clock_rate(-1, resource, pm_clk, &new_rate); |
| 227 | if (ret) { |
| 228 | printf("%s err %d\n", __func__, ret); |
| 229 | return ret; |
| 230 | } |
| 231 | |
| 232 | return new_rate; |
| 233 | } |
| 234 | |
| 235 | int __imx8_clk_enable(struct clk *clk, bool enable) |
| 236 | { |
| 237 | sc_pm_clk_t pm_clk; |
| 238 | u16 resource; |
| 239 | int ret; |
| 240 | |
| 241 | debug("%s(#%lu)\n", __func__, clk->id); |
| 242 | |
| 243 | switch (clk->id) { |
| 244 | case IMX8QM_I2C0_CLK: |
| 245 | resource = SC_R_I2C_0; |
| 246 | pm_clk = SC_PM_CLK_PER; |
| 247 | break; |
| 248 | case IMX8QM_I2C1_CLK: |
| 249 | resource = SC_R_I2C_1; |
| 250 | pm_clk = SC_PM_CLK_PER; |
| 251 | break; |
| 252 | case IMX8QM_I2C2_CLK: |
| 253 | resource = SC_R_I2C_2; |
| 254 | pm_clk = SC_PM_CLK_PER; |
| 255 | break; |
| 256 | case IMX8QM_I2C3_CLK: |
| 257 | resource = SC_R_I2C_3; |
| 258 | pm_clk = SC_PM_CLK_PER; |
| 259 | break; |
| 260 | case IMX8QM_UART0_CLK: |
| 261 | resource = SC_R_UART_0; |
| 262 | pm_clk = SC_PM_CLK_PER; |
| 263 | break; |
| 264 | case IMX8QM_UART1_CLK: |
| 265 | resource = SC_R_UART_1; |
| 266 | pm_clk = SC_PM_CLK_PER; |
| 267 | break; |
| 268 | case IMX8QM_UART2_CLK: |
| 269 | resource = SC_R_UART_2; |
| 270 | pm_clk = SC_PM_CLK_PER; |
| 271 | break; |
| 272 | case IMX8QM_UART3_CLK: |
| 273 | resource = SC_R_UART_3; |
| 274 | pm_clk = SC_PM_CLK_PER; |
| 275 | break; |
| 276 | case IMX8QM_SDHC0_IPG_CLK: |
| 277 | case IMX8QM_SDHC0_CLK: |
| 278 | case IMX8QM_SDHC0_DIV: |
| 279 | resource = SC_R_SDHC_0; |
| 280 | pm_clk = SC_PM_CLK_PER; |
| 281 | break; |
| 282 | case IMX8QM_SDHC1_IPG_CLK: |
| 283 | case IMX8QM_SDHC1_CLK: |
| 284 | case IMX8QM_SDHC1_DIV: |
| 285 | resource = SC_R_SDHC_1; |
| 286 | pm_clk = SC_PM_CLK_PER; |
| 287 | break; |
Marcel Ziswiler | 62eb818 | 2019-05-31 19:00:17 +0300 | [diff] [blame] | 288 | case IMX8QM_SDHC2_IPG_CLK: |
| 289 | case IMX8QM_SDHC2_CLK: |
| 290 | case IMX8QM_SDHC2_DIV: |
| 291 | resource = SC_R_SDHC_2; |
| 292 | pm_clk = SC_PM_CLK_PER; |
| 293 | break; |
Peng Fan | 9a0dc91 | 2019-03-05 02:32:35 +0000 | [diff] [blame] | 294 | case IMX8QM_ENET0_IPG_CLK: |
| 295 | case IMX8QM_ENET0_AHB_CLK: |
| 296 | case IMX8QM_ENET0_REF_DIV: |
| 297 | case IMX8QM_ENET0_PTP_CLK: |
| 298 | resource = SC_R_ENET_0; |
| 299 | pm_clk = SC_PM_CLK_PER; |
| 300 | break; |
| 301 | case IMX8QM_ENET1_IPG_CLK: |
| 302 | case IMX8QM_ENET1_AHB_CLK: |
| 303 | case IMX8QM_ENET1_REF_DIV: |
| 304 | case IMX8QM_ENET1_PTP_CLK: |
| 305 | resource = SC_R_ENET_1; |
| 306 | pm_clk = SC_PM_CLK_PER; |
| 307 | break; |
| 308 | default: |
| 309 | if (clk->id < IMX8QM_UART0_IPG_CLK || |
| 310 | clk->id >= IMX8QM_CLK_END) { |
| 311 | printf("%s(Invalid clk ID #%lu)\n", |
| 312 | __func__, clk->id); |
| 313 | return -EINVAL; |
| 314 | } |
| 315 | return -ENOTSUPP; |
| 316 | } |
| 317 | |
| 318 | ret = sc_pm_clock_enable(-1, resource, pm_clk, enable, 0); |
| 319 | if (ret) { |
| 320 | printf("%s err %d\n", __func__, ret); |
| 321 | return ret; |
| 322 | } |
| 323 | |
| 324 | return 0; |
| 325 | } |