Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source |
| 4 | * |
| 5 | * Copyright 2006 Pengutronix |
| 6 | * Sascha Hauer <s.hauer@pengutronix.de> |
| 7 | * Copyright 2007 Pengutronix |
| 8 | * Juergen Beisert <j.beisert@pengutronix.de> |
| 9 | */ |
| 10 | |
| 11 | /include/ "mpc5200b.dtsi" |
| 12 | |
| 13 | &gpt0 { fsl,has-wdt; }; |
| 14 | &gpt2 { gpio-controller; }; |
| 15 | &gpt3 { gpio-controller; }; |
| 16 | &gpt4 { gpio-controller; }; |
| 17 | &gpt5 { gpio-controller; }; |
| 18 | &gpt6 { gpio-controller; }; |
| 19 | &gpt7 { gpio-controller; }; |
| 20 | |
| 21 | / { |
| 22 | model = "phytec,pcm030"; |
| 23 | compatible = "phytec,pcm030"; |
| 24 | |
| 25 | soc5200@f0000000 { |
| 26 | audioplatform: psc@2000 { /* PSC1 in ac97 mode */ |
| 27 | compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; |
| 28 | cell-index = <0>; |
| 29 | }; |
| 30 | |
| 31 | /* PSC2 port is used by CAN1/2 */ |
| 32 | psc@2200 { |
| 33 | status = "disabled"; |
| 34 | }; |
| 35 | |
| 36 | psc@2400 { /* PSC3 in UART mode */ |
| 37 | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| 38 | }; |
| 39 | |
| 40 | /* PSC4 is ??? */ |
| 41 | psc@2600 { |
| 42 | status = "disabled"; |
| 43 | }; |
| 44 | |
| 45 | /* PSC5 is ??? */ |
| 46 | psc@2800 { |
| 47 | status = "disabled"; |
| 48 | }; |
| 49 | |
| 50 | psc@2c00 { /* PSC6 in UART mode */ |
| 51 | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| 52 | }; |
| 53 | |
| 54 | ethernet@3000 { |
| 55 | phy-handle = <&phy0>; |
| 56 | }; |
| 57 | |
| 58 | mdio@3000 { |
| 59 | phy0: ethernet-phy@0 { |
| 60 | reg = <0>; |
| 61 | }; |
| 62 | }; |
| 63 | |
| 64 | i2c@3d40 { |
| 65 | rtc@51 { |
| 66 | compatible = "nxp,pcf8563"; |
| 67 | reg = <0x51>; |
| 68 | }; |
| 69 | eeprom@52 { |
| 70 | compatible = "catalyst,24c32", "atmel,24c32"; |
| 71 | reg = <0x52>; |
| 72 | pagesize = <32>; |
| 73 | }; |
| 74 | }; |
| 75 | |
| 76 | sram@8000 { |
| 77 | compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; |
| 78 | reg = <0x8000 0x4000>; |
| 79 | }; |
| 80 | }; |
| 81 | |
| 82 | pci@f0000d00 { |
| 83 | interrupt-map-mask = <0xf800 0 0 7>; |
| 84 | interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot |
| 85 | 0xc000 0 0 2 &mpc5200_pic 1 1 3 |
| 86 | 0xc000 0 0 3 &mpc5200_pic 1 2 3 |
| 87 | 0xc000 0 0 4 &mpc5200_pic 1 3 3 |
| 88 | |
| 89 | 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot |
| 90 | 0xc800 0 0 2 &mpc5200_pic 1 2 3 |
| 91 | 0xc800 0 0 3 &mpc5200_pic 1 3 3 |
| 92 | 0xc800 0 0 4 &mpc5200_pic 0 0 3>; |
| 93 | ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>, |
| 94 | <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>, |
| 95 | <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; |
| 96 | }; |
| 97 | |
| 98 | localbus { |
| 99 | status = "disabled"; |
| 100 | }; |
| 101 | |
| 102 | sound { |
| 103 | compatible = "phytec,pcm030-audio-fabric"; |
| 104 | asoc-platform = <&audioplatform>; |
| 105 | }; |
| 106 | }; |