| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | NVIDIA Tegra30 AHUB (Audio Hub) |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible : For Tegra30, must contain "nvidia,tegra30-ahub". For Tegra114, |
| 5 | must contain "nvidia,tegra114-ahub". For Tegra124, must contain |
| 6 | "nvidia,tegra124-ahub". Otherwise, must contain "nvidia,<chip>-ahub", |
| 7 | plus at least one of the above, where <chip> is tegra132. |
| 8 | - reg : Should contain the register physical address and length for each of |
| 9 | the AHUB's register blocks. |
| 10 | - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks. |
| 11 | - Tegra114 requires an additional entry, for the APBIF2 register block. |
| 12 | - interrupts : Should contain AHUB interrupt |
| 13 | - clocks : Must contain an entry for each entry in clock-names. |
| 14 | See ../clocks/clock-bindings.txt for details. |
| 15 | - clock-names : Must include the following entries: |
| 16 | - d_audio |
| 17 | - apbif |
| 18 | - resets : Must contain an entry for each entry in reset-names. |
| 19 | See ../reset/reset.txt for details. |
| 20 | - reset-names : Must include the following entries: |
| 21 | Tegra30 and later: |
| 22 | - d_audio |
| 23 | - apbif |
| 24 | - i2s0 |
| 25 | - i2s1 |
| 26 | - i2s2 |
| 27 | - i2s3 |
| 28 | - i2s4 |
| 29 | - dam0 |
| 30 | - dam1 |
| 31 | - dam2 |
| 32 | - spdif |
| 33 | Tegra114 and later additionally require: |
| 34 | - amx |
| 35 | - adx |
| 36 | Tegra124 and later additionally require: |
| 37 | - amx1 |
| 38 | - adx1 |
| 39 | - afc0 |
| 40 | - afc1 |
| 41 | - afc2 |
| 42 | - afc3 |
| 43 | - afc4 |
| 44 | - afc5 |
| 45 | - ranges : The bus address mapping for the configlink register bus. |
| 46 | Can be empty since the mapping is 1:1. |
| 47 | - dmas : Must contain an entry for each entry in clock-names. |
| 48 | See ../dma/dma.txt for details. |
| 49 | - dma-names : Must include the following entries: |
| 50 | - rx0 .. rx<n> |
| 51 | - tx0 .. tx<n> |
| 52 | ... where n is: |
| 53 | Tegra30: 3 |
| 54 | Tegra114, Tegra124: 9 |
| 55 | - #address-cells : For the configlink bus. Should be <1>; |
| 56 | - #size-cells : For the configlink bus. Should be <1>. |
| 57 | |
| 58 | AHUB client modules need to specify the IDs of their CIFs (Client InterFaces). |
| 59 | For RX CIFs, the numbers indicate the register number within AHUB routing |
| 60 | register space (APBIF 0..3 RX, I2S 0..5 RX, DAM 0..2 RX 0..1, SPDIF RX 0..1). |
| 61 | For TX CIFs, the numbers indicate the bit position within the AHUB routing |
| 62 | registers (APBIF 0..3 TX, I2S 0..5 TX, DAM 0..2 TX, SPDIF TX 0..1). |
| 63 | |
| 64 | Example: |
| 65 | |
| 66 | ahub@70080000 { |
| 67 | compatible = "nvidia,tegra30-ahub"; |
| 68 | reg = <0x70080000 0x200 0x70080200 0x100>; |
| 69 | interrupts = < 0 103 0x04 >; |
| 70 | nvidia,dma-request-selector = <&apbdma 1>; |
| 71 | clocks = <&tegra_car 106>, <&tegra_car 107>; |
| 72 | clock-names = "d_audio", "apbif"; |
| 73 | resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>, |
| 74 | <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>, |
| 75 | <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>, |
| 76 | <&tegra_car 110>, <&tegra_car 10>; |
| 77 | reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", |
| 78 | "i2s3", "i2s4", "dam0", "dam1", "dam2", |
| 79 | "spdif"; |
| 80 | dmas = <&apbdma 1>, <&apbdma 1>; |
| 81 | <&apbdma 2>, <&apbdma 2>; |
| 82 | <&apbdma 3>, <&apbdma 3>; |
| 83 | <&apbdma 4>, <&apbdma 4>; |
| 84 | dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3"; |
| 85 | ranges; |
| 86 | #address-cells = <1>; |
| 87 | #size-cells = <1>; |
| 88 | }; |