Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / b35aa4f7b4ddadb58b2c20e407a95f1480e618b9 / . / dts / upstream / Bindings / mfd / actions,atc260x.yaml
blob: 6811246c57713258728322a879627b7dc525e2ec [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Actions Semi ATC260x Power Management IC
8
9maintainers:
10 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
11 - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
12
13description: |
14 ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR
15 and GPIO controller blocks. Currently only the PM related functionalities
16 (i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A
17 chip variants are supported.
18 ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO
19 regulators and 1 fixed LDO regulator.
20 ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO
21 regulators.
22
23allOf:
24 - $ref: ../input/input.yaml
25
26properties:
27 compatible:
28 enum:
29 - actions,atc2603c
30 - actions,atc2609a
31
32 reg:
33 maxItems: 1
34
35 interrupts:
36 maxItems: 1
37
38 reset-time-sec:
39 description: |
40 Duration in seconds which the key should be kept pressed for device
41 to reset automatically. The hardware default is 8. Use 0 to disable
42 this functionality.
43 enum: [0, 6, 8, 10, 12]
44
45 regulators:
46 type: object
47 description: |
48 List of child nodes specifying the regulators, depending on chip variant:
49 * ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1
50 * ATC2609A: dcdc[0-4], ldo[0-9]
51
52 properties:
53 compatible:
54 enum:
55 - actions,atc2603c-regulator
56 - actions,atc2609a-regulator
57
58 switchldo1:
59 type: object
60 $ref: ../regulator/regulator.yaml
61
62 properties:
63 regulator-name: true
64 regulator-boot-on: true
65 regulator-always-on: true
66 regulator-min-microvolt: true
67 regulator-max-microvolt: true
68 regulator-allow-bypass: true
69 regulator-active-discharge: true
70
71 additionalProperties: false
72
73 patternProperties:
74 "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$":
75 description: ATC260x voltage regulators supplies
76
77 "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
78 type: object
79 $ref: ../regulator/regulator.yaml
80
81 properties:
82 regulator-name: true
83 regulator-boot-on: true
84 regulator-always-on: true
85 regulator-min-microvolt: true
86 regulator-max-microvolt: true
87 regulator-allow-bypass: true
88
89 additionalProperties: false
90
91 allOf:
92 - if:
93 properties:
94 compatible:
95 contains:
96 const: actions,atc2603c-regulator
97 then:
98 patternProperties:
99 "^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false
100
101 "^(ldo|dcdc)":
102 properties:
103 regulator-allow-bypass: false
104 - if:
105 properties:
106 compatible:
107 contains:
108 const: actions,atc2609a-regulator
109 then:
110 patternProperties:
111 "^(ldo1[1-2]|switchldo1)(-supply)?$": false
112
113 "^(dcdc|ldo[3-9])":
114 properties:
115 regulator-allow-bypass: false
116
117 required:
118 - compatible
119
120 additionalProperties: false
121
122additionalProperties: false
123
124required:
125 - compatible
126 - reg
127 - interrupts
128
129examples:
130 - |
131 #include <dt-bindings/interrupt-controller/arm-gic.h>
132 i2c {
133 #address-cells = <1>;
134 #size-cells = <0>;
135
136 pmic@65 {
137 compatible = "actions,atc2603c";
138 reg = <0x65>;
139 interrupt-parent = <&sirq>;
140 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
141
142 reset-time-sec = <6>;
143
144 regulators {
145 compatible = "actions,atc2603c-regulator";
146
147 dcdc1-supply = <&reg_5v0>;
148 dcdc3-supply = <&reg_5v0>;
149 ldo5-supply = <&reg_5v0>;
150 switchldo1-supply = <&vcc>;
151
152 vdd_cpu: dcdc1 {
153 regulator-name = "VDD_CPU";
154 regulator-min-microvolt = <700000>;
155 regulator-max-microvolt = <1400000>;
156 regulator-always-on;
157 };
158
159 vcc: dcdc3 {
160 regulator-name = "VCC";
161 regulator-min-microvolt = <2600000>;
162 regulator-max-microvolt = <3300000>;
163 regulator-always-on;
164 };
165
166 vcc_3v1: ldo5 {
167 regulator-name = "VCC_3V1";
168 regulator-min-microvolt = <2600000>;
169 regulator-max-microvolt = <3300000>;
170 };
171
172 sd_vcc: switchldo1 {
173 regulator-name = "SD_VCC";
174 regulator-min-microvolt = <3000000>;
175 regulator-max-microvolt = <3300000>;
176 regulator-always-on;
177 regulator-boot-on;
178 };
179 };
180 };
181 };
182
183...