blob: f168e4ff996531e1021ea606310093a3a9f5b80a [file] [log] [blame]
Marek Vasutba2ade92015-12-01 18:09:52 +01001/*
2 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#include "socfpga_cyclone5.dtsi"
8
9/ {
10 model = "samtec VIN|ING FPGA";
11 compatible = "altr,socfpga-cyclone5", "altr,socfpga";
12
13 chosen {
14 bootargs = "console=ttyS0,115200";
15 };
16
17 aliases {
18 ethernet0 = &gmac1;
19 udc0 = &usb0;
20 };
21
22 memory {
23 name = "memory";
24 device_type = "memory";
25 reg = <0x0 0x40000000>; /* 1GB */
26 };
27
28 soc {
29 u-boot,dm-pre-reloc;
30 };
31};
32
33&gmac1 {
34 status = "okay";
35 phy-mode = "rgmii";
36
37 rxd0-skew-ps = <0>;
38 rxd1-skew-ps = <0>;
39 rxd2-skew-ps = <0>;
40 rxd3-skew-ps = <0>;
41 txen-skew-ps = <0>;
42 txc-skew-ps = <2600>;
43 rxdv-skew-ps = <0>;
44 rxc-skew-ps = <2000>;
45};
46
47&gpio0 {
48 status = "okay";
49};
50
51&gpio1 {
52 status = "okay";
53};
54
55&gpio2 {
56 status = "okay";
57};
58
59&i2c0 {
60 status = "okay";
61
62 rtc: rtc@68 {
63 compatible = "stm,m41t82";
64 reg = <0x68>;
65 };
66};
67
68&qspi {
69 status = "okay";
70 u-boot,dm-pre-reloc;
71
72 flash0: n25q128@0 {
73 u-boot,dm-pre-reloc;
74 #address-cells = <1>;
75 #size-cells = <1>;
76 compatible = "n25q128", "spi-flash";
77 reg = <0>; /* chip select */
78 spi-max-frequency = <50000000>;
79 m25p,fast-read;
80 page-size = <256>;
81 block-size = <16>; /* 2^16, 64KB */
82 read-delay = <4>; /* delay value in read data capture register */
83 tshsl-ns = <50>;
84 tsd2d-ns = <50>;
85 tchsh-ns = <4>;
86 tslch-ns = <4>;
87 };
88
89 flash1: n25q00@1 {
90 u-boot,dm-pre-reloc;
91 #address-cells = <1>;
92 #size-cells = <1>;
93 compatible = "n25q00", "spi-flash";
94 reg = <1>; /* chip select */
95 spi-max-frequency = <50000000>;
96 m25p,fast-read;
97 page-size = <256>;
98 block-size = <16>; /* 2^16, 64KB */
99 read-delay = <4>; /* delay value in read data capture register */
100 tshsl-ns = <50>;
101 tsd2d-ns = <50>;
102 tchsh-ns = <4>;
103 tslch-ns = <4>;
104 };
105};
106
107&usb0 {
108 status = "okay";
109};
110
111&usb1 {
112 status = "okay";
113};