| Harinarayan Bhatta | b29aa32 | 2016-11-29 16:33:22 -0600 | [diff] [blame^] | 1 | /* |
| 2 | * Secure entry function for CPU Core #1 |
| 3 | * |
| 4 | * (C) Copyright 2016 |
| 5 | * Texas Instruments, <www.ti.com> |
| 6 | * |
| 7 | * Author : |
| 8 | * Harinarayan Bhatta <harinarayan@ti.com> |
| 9 | * |
| 10 | * SPDX-License-Identifier: GPL-2.0+ |
| 11 | */ |
| 12 | |
| 13 | #include <config.h> |
| 14 | #include <asm/arch/omap.h> |
| 15 | #include <asm/omap_common.h> |
| 16 | #include <linux/linkage.h> |
| 17 | |
| 18 | .arch_extension sec |
| 19 | |
| 20 | #if !defined(CONFIG_SYS_DCACHE_OFF) |
| 21 | .global flush_dcache_range |
| 22 | #endif |
| 23 | |
| 24 | #define AUX_CORE_BOOT_0 0x48281800 |
| 25 | #define AUX_CORE_BOOT_1 0x48281804 |
| 26 | |
| 27 | #ifdef CONFIG_DRA7XX |
| 28 | /* DRA7xx ROM code function "startup_BootSlave". This function is where CPU1 |
| 29 | * waits on WFE, polling on AUX_CORE_BOOT_x registers. |
| 30 | * This address is same for J6 and J6 Eco. |
| 31 | */ |
| 32 | #define ROM_FXN_STARTUP_BOOTSLAVE 0x00038a64 |
| 33 | #endif |
| 34 | |
| 35 | /* Assembly core where CPU1 is woken up into |
| 36 | * No need to save-restore registers, does not use stack. |
| 37 | */ |
| 38 | LENTRY(cpu1_entry) |
| 39 | ldr r4, =omap_smc_sec_cpu1_args |
| 40 | ldm r4, {r0,r1,r2,r3} @ Retrieve args |
| 41 | |
| 42 | mov r6, #0xFF @ Indicate new Task call |
| 43 | mov r12, #0x00 @ Secure Service ID in R12 |
| 44 | |
| 45 | dsb |
| 46 | dmb |
| 47 | smc 0 @ SMC #0 to enter monitor mode |
| 48 | |
| 49 | b .Lend @ exit at end of the service execution |
| 50 | nop |
| 51 | |
| 52 | @ In case of IRQ happening in Secure, then ARM will branch here. |
| 53 | @ At that moment, IRQ will be pending and ARM will jump to Non Secure |
| 54 | @ IRQ handler |
| 55 | mov r12, #0xFE |
| 56 | |
| 57 | dsb |
| 58 | dmb |
| 59 | smc 0 @ SMC #0 to enter monitor mode |
| 60 | |
| 61 | .Lend: |
| 62 | ldr r4, =omap_smc_sec_cpu1_args |
| 63 | str r0, [r4, #0x10] @ save return value |
| 64 | ldr r4, =AUX_CORE_BOOT_0 |
| 65 | mov r5, #0x0 |
| 66 | str r5, [r4] |
| 67 | ldr r4, =ROM_FXN_STARTUP_BOOTSLAVE |
| 68 | sev @ Tell CPU0 we are done |
| 69 | bx r4 @ Jump back to ROM |
| 70 | END(cpu1_entry) |
| 71 | |
| 72 | /* |
| 73 | * u32 omap_smc_sec_cpu1(u32 service, u32 proc_id, u32 flag, u32 *params); |
| 74 | * |
| 75 | * Makes a secure ROM/PPA call on CPU Core #1 on supported platforms. |
| 76 | * Assumes that CPU #1 is waiting in ROM code and not yet woken up or used by |
| 77 | * u-boot. |
| 78 | */ |
| 79 | ENTRY(omap_smc_sec_cpu1) |
| 80 | push {r4, r5, lr} |
| 81 | ldr r4, =omap_smc_sec_cpu1_args |
| 82 | stm r4, {r0,r1,r2,r3} @ Save args to memory |
| 83 | #if !defined(CONFIG_SYS_DCACHE_OFF) |
| 84 | mov r0, r4 |
| 85 | mov r1, #CONFIG_SYS_CACHELINE_SIZE |
| 86 | add r1, r0, r1 @ dcache is not enabled on CPU1, so |
| 87 | blx flush_dcache_range @ flush the cache on args buffer |
| 88 | #endif |
| 89 | ldr r4, =AUX_CORE_BOOT_1 |
| 90 | ldr r5, =cpu1_entry |
| 91 | str r5, [r4] @ Setup CPU1 entry function |
| 92 | ldr r4, =AUX_CORE_BOOT_0 |
| 93 | mov r5, #0x10 |
| 94 | str r5, [r4] @ Tell ROM to exit while loop |
| 95 | sev @ Wake up CPU1 |
| 96 | .Lwait: |
| 97 | wfe @ Wait for CPU1 to finish |
| 98 | nop |
| 99 | ldr r5, [r4] @ Check if CPU1 is done |
| 100 | cmp r5, #0 |
| 101 | bne .Lwait |
| 102 | |
| 103 | ldr r4, =omap_smc_sec_cpu1_args |
| 104 | ldr r0, [r4, #0x10] @ Retrieve return value |
| 105 | pop {r4, r5, pc} |
| 106 | ENDPROC(omap_smc_sec_cpu1) |
| 107 | |
| 108 | /* |
| 109 | * Buffer to save function arguments and return value for omap_smc_sec_cpu1 |
| 110 | */ |
| 111 | .section .data |
| 112 | omap_smc_sec_cpu1_args: |
| 113 | #if !defined(CONFIG_SYS_DCACHE_OFF) |
| 114 | .balign CONFIG_SYS_CACHELINE_SIZE |
| 115 | .rept CONFIG_SYS_CACHELINE_SIZE/4 |
| 116 | .word 0 |
| 117 | .endr |
| 118 | #else |
| 119 | .rept 5 |
| 120 | .word 0 |
| 121 | .endr |
| 122 | #endif |
| 123 | END(omap_smc_sec_cpu1_args) |