blob: 2f59f52ee15e4b26b5f1914142e4e0bcad4dd102 [file] [log] [blame]
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +01001/*
2 * (C) Copyright 2015
Kamil Lulko75d48a62015-12-01 09:08:19 +01003 * Kamil Lulko, <kamil.lulko@gmail.com>
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +01004 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010011#define CONFIG_STM32F4DISCOVERY
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010012
Antonio Borneo989e8b22015-07-19 22:19:46 +080013#define CONFIG_MISC_INIT_R
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010014
15#define CONFIG_SYS_FLASH_BASE 0x08000000
16
17#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010018
19#define CONFIG_SYS_ICACHE_OFF
20#define CONFIG_SYS_DCACHE_OFF
21
22/*
23 * Configuration of the external SDRAM memory
24 */
25#define CONFIG_NR_DRAM_BANKS 1
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010026#define CONFIG_SYS_RAM_CS 1
27#define CONFIG_SYS_RAM_FREQ_DIV 2
28#define CONFIG_SYS_RAM_BASE 0xD0000000
29#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
30#define CONFIG_SYS_LOAD_ADDR 0xD0400000
31#define CONFIG_LOADADDR 0xD0400000
32
33#define CONFIG_SYS_MAX_FLASH_SECT 12
34#define CONFIG_SYS_MAX_FLASH_BANKS 2
35
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010036#define CONFIG_ENV_OFFSET (256 << 10)
37#define CONFIG_ENV_SECT_SIZE (128 << 10)
38#define CONFIG_ENV_SIZE (8 << 10)
39
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010040#define CONFIG_RED_LED 110
41#define CONFIG_GREEN_LED 109
42
Vikas Manochae750d562016-03-09 15:18:13 -080043#define CONFIG_STM32_FLASH
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010044
Antonio Borneof4a1a862015-07-19 22:19:48 +080045#define CONFIG_SYS_CLK_FREQ 180000000 /* 180 MHz */
46
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010047#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
48
49#define CONFIG_CMDLINE_TAG
50#define CONFIG_SETUP_MEMORY_TAGS
51#define CONFIG_INITRD_TAG
52#define CONFIG_REVISION_TAG
53
54#define CONFIG_SYS_CBSIZE 1024
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010055
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010056#define CONFIG_SYS_MALLOC_LEN (2 << 20)
57
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010058#define CONFIG_BOOTCOMMAND \
59 "run bootcmd_romfs"
60
61#define CONFIG_EXTRA_ENV_SETTINGS \
62 "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
63 "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
64 "bootm 0x08044000 - 0x08042000\0"
65
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010066/*
67 * Command line configuration.
68 */
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010069
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010070#endif /* __CONFIG_H */