Svyatoslav Ryhel | fcb1d91 | 2023-06-30 10:29:05 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /dts-v1/; |
| 3 | |
| 4 | #include "tegra30-lg-x3.dtsi" |
| 5 | |
| 6 | / { |
| 7 | model = "LG Optimus 4X HD"; |
| 8 | compatible = "lge,p880", "nvidia,tegra30"; |
| 9 | |
| 10 | aliases { |
| 11 | mmc1 = &sdmmc3; /* uSD slot */ |
| 12 | }; |
| 13 | |
Svyatoslav Ryhel | aef10d8 | 2023-11-27 19:08:32 +0200 | [diff] [blame^] | 14 | pinmux@70000868 { |
| 15 | state_default: pinmux { |
| 16 | /* WLAN SDIO pinmux */ |
| 17 | host_wlan_wake { |
| 18 | nvidia,pins = "pu4"; |
| 19 | nvidia,function = "pwm1"; |
| 20 | nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| 21 | nvidia,tristate = <TEGRA_PIN_ENABLE>; |
| 22 | nvidia,enable-input = <TEGRA_PIN_ENABLE>; |
| 23 | }; |
| 24 | |
| 25 | /* GNSS UART-B pinmux */ |
| 26 | uartb_rxd { |
| 27 | nvidia,pins = "uart2_rxd_pc3"; |
| 28 | nvidia,function = "uartb"; |
| 29 | nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| 30 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 31 | nvidia,enable-input = <TEGRA_PIN_ENABLE>; |
| 32 | }; |
| 33 | uartb_txd { |
| 34 | nvidia,pins = "uart2_txd_pc2"; |
| 35 | nvidia,function = "uartb"; |
| 36 | nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| 37 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 38 | nvidia,enable-input = <TEGRA_PIN_DISABLE>; |
| 39 | }; |
| 40 | gps_reset { |
| 41 | nvidia,pins = "kb_row7_pr7"; |
| 42 | nvidia,function = "kbc"; |
| 43 | nvidia,pull = <TEGRA_PIN_PULL_UP>; |
| 44 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 45 | nvidia,enable-input = <TEGRA_PIN_DISABLE>; |
| 46 | }; |
| 47 | |
| 48 | /* MicroSD pinmux */ |
| 49 | sdmmc3_clk { |
| 50 | nvidia,pins = "sdmmc3_clk_pa6"; |
| 51 | nvidia,function = "sdmmc3"; |
| 52 | nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| 53 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 54 | nvidia,enable-input = <TEGRA_PIN_ENABLE>; |
| 55 | }; |
| 56 | sdmmc3_data { |
| 57 | nvidia,pins = "sdmmc3_cmd_pa7", |
| 58 | "sdmmc3_dat0_pb7", |
| 59 | "sdmmc3_dat1_pb6", |
| 60 | "sdmmc3_dat2_pb5", |
| 61 | "sdmmc3_dat3_pb4"; |
| 62 | nvidia,function = "sdmmc3"; |
| 63 | nvidia,pull = <TEGRA_PIN_PULL_UP>; |
| 64 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 65 | nvidia,enable-input = <TEGRA_PIN_ENABLE>; |
| 66 | }; |
| 67 | microsd_detect { |
| 68 | nvidia,pins = "clk2_out_pw5"; |
| 69 | nvidia,function = "rsvd2"; |
| 70 | nvidia,pull = <TEGRA_PIN_PULL_UP>; |
| 71 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 72 | nvidia,enable-input = <TEGRA_PIN_ENABLE>; |
| 73 | }; |
| 74 | |
| 75 | /* GPIO keys pinmux */ |
| 76 | volume_up { |
| 77 | nvidia,pins = "ulpi_data6_po7"; |
| 78 | nvidia,function = "spi2"; |
| 79 | nvidia,pull = <TEGRA_PIN_PULL_UP>; |
| 80 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 81 | nvidia,enable-input = <TEGRA_PIN_ENABLE>; |
| 82 | }; |
| 83 | |
| 84 | /* Sensors pinmux */ |
| 85 | current_alert_irq { |
| 86 | nvidia,pins = "uart2_rts_n_pj6"; |
| 87 | nvidia,function = "uartb"; |
| 88 | nvidia,pull = <TEGRA_PIN_PULL_UP>; |
| 89 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 90 | nvidia,enable-input = <TEGRA_PIN_ENABLE>; |
| 91 | }; |
| 92 | |
| 93 | /* AUDIO pinmux */ |
| 94 | sub_mic_ldo { |
| 95 | nvidia,pins = "gmi_cs7_n_pi6"; |
| 96 | nvidia,function = "gmi"; |
| 97 | nvidia,pull = <TEGRA_PIN_PULL_DOWN>; |
| 98 | nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| 99 | nvidia,enable-input = <TEGRA_PIN_DISABLE>; |
| 100 | }; |
| 101 | }; |
| 102 | }; |
| 103 | |
Svyatoslav Ryhel | fcb1d91 | 2023-06-30 10:29:05 +0300 | [diff] [blame] | 104 | sdmmc3: sdhci@78000400 { |
| 105 | status = "okay"; |
| 106 | bus-width = <4>; |
| 107 | |
| 108 | cd-gpios = <&gpio TEGRA_GPIO(W, 5) GPIO_ACTIVE_LOW>; |
| 109 | |
| 110 | vmmc-supply = <&vdd_usd>; |
| 111 | vqmmc-supply = <&vdd_1v8_vio>; |
| 112 | }; |
| 113 | |
| 114 | gpio-keys { |
| 115 | key-volume-up { |
| 116 | label = "Volume Up"; |
| 117 | gpios = <&gpio TEGRA_GPIO(O, 7) GPIO_ACTIVE_LOW>; |
| 118 | linux,code = <KEY_UP>; |
| 119 | }; |
| 120 | }; |
| 121 | |
| 122 | panel: panel { |
| 123 | compatible = "jdi,dx12d100vm0eaa"; |
| 124 | |
| 125 | enable-gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>; |
| 126 | reset-gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; |
| 127 | |
| 128 | backlight = <&backlight>; |
| 129 | }; |
| 130 | }; |